Is Hardie board flexible?

HardiePlank Fiber Cement Colors Flexibility

When it comes to colors, HardiePlank Lap siding is flexible. It utilizes Color plus Technology which makes sure that the final siding achieves 30% better fade resistance than the vinyl or wood options.

Is Hardie board easy to break?

Here's the trickiest part about this whole process: while hardie board is an amazing product, it also breaks a little too easily. They break under their own weight, so make sure to carry them vertically, not flat. Another pair of hands is always best when handling the boards.

What is the difference between hardiplank and Hardie board?

Fiber cement siding is often called “hardiplank” or even “hardie board” named from the most popular brand of fiber cement siding which is manufactured by James Hardie. Fiber cement planks are formed by combining wood pulp with Portland cement.

Can you screw into Hardie board?

Yes, you can drive screws into the Hardie board if you use suitable screws. Hardie Board requires using specific screws to work effectively. For best results, use ribbed stainless steel screws with wafer-head.

Do you nail or screw Hardie board?

Fasten HardieBacker sheets with proper nails or screws (as listed in ''Materials Required'' in the backer installation instructions) every 8'' around the perimeter and all supporting studs. Keep fasteners between 3/8'' and 3/4'' from sheet edges and 2'' in from sheet corners.

DURAGREEN fiber cement board - super flexible board

Should Hardie board be caulked?

James Hardie DOES NOT recommend using caulk or “H”-jointers for the butt joints of HardiePlank® siding with ColorPlus® technology. James Hardie also DOES NOT recommend applying caulk to the horizontal overlap between siding planks (see Figure 2).

Do you need to pre drill Hardie board?

Nailing Basics

Fiberboard cement siding can be hand-nailed, but because it's so much harder and more brittle than wood, you have to predrill holes near any edge. You can save yourself a bunch of time by using a pneumatic coil siding nail gun.

What is the best way to fasten Hardie board?

You can use corrosion-resistant screws, or you can use stainless steel or hot-dipped galvanized nails. You can nail the siding by either blind nailing it at the top or face nailing it at the bottom. It's best to use siding nails for face nailing or roofing nails for blind nailing.

Can you drill a hole in Hardie board?

HardiePlank is available as ready-to-paint or with a color layer. Although the siding does not require drilling pilot holes, you may need to run wire or cable through the siding, necessitating drilling a hole.

What fasteners do you use with Hardie board?

James Hardie recommends the use of quality, hot-dipped galvanized nails. James Hardie is not responsible for the corrosion resistance of fasteners. Stainless steel fasteners are recommended when installing James Hardie® products near the ocean, large bodies of water, or in very humid climates.

How long does Hardie board last?

Hardie Board siding is a greater financial investment than vinyl siding, but it lasts longer too. So as you consider this aspect of your decision, realize you will enjoy this outstanding siding for up to 50 years.

Is Hardie board better than vinyl siding?

By contrast, Hardie® fiber cement siding is more durable and up to 5x thicker than vinyl siding. It easily stands up to the elements, resisting damage from wind, rain, freezing temperatures and hail, and gives homes years of protection with low maintenance.

Do termites eat Hardie board?

Do Termites Eat Hardie Board? Although termites do eat wood, they cannot get to the wood in Hardie Board siding because of the fiber cement materials throughout the product.

What causes Hardie board to crack?

Common Causes For Hardie Board Cracking Or Splitting

Nails driven below the panel surface and directional nailing can cause cracking and splitting of fiber cement. Nailing too high or close at an edge. This can create a small crack which leads from the nail to the edge of the siding board. House Settling or moving.

Is Hardie board as strong as brick?

Brick and Hardiplank are some of the most durable materials used in the construction of siding, but brick will outlast Hardiplank.

Does Hardie board warp?

HardiePlank® is a fiber cement based siding, so it's impervious to water, termites, woodpeckers, and any other animal you can think of. It's dimensionally stable so it won't warp like wood or vinyl siding can, and it won't melt or warp when heat is applied to it.

Does Hardie siding need to be nailed into studs?

Building codes will usually require installing siding over water-resistant barriers and nailed into the studs every 16 or 24 inches.

What do you use to fill nail holes in hardiplank?

The installation guide for Hardie Board, which is a brand of cement board siding recommends using caulking to fill nail holes. When I've installed it I used a high-quality exterior paintable calking after smoothing the edge of the holes. Once the caulk is dry you can touch up the paint.

What size nails do you use for Hardie siding?

James Hardie recommends using stainless steel finish nails when installing HardieTrim products. Use a 2 in. finish nail to fasten trim together. Longer finish nails may bend.

Do you need OSB under Hardie board?

GENERAL REQUIREMENTS: HardiePlank® lap siding can be installed over braced wood or steel studs spaced a maximum of 24" o.c. or directly to minimum 7/16" thick OSB sheathing. See General Fastening Requirements.

Is Hardie board difficult to install?

Joining Hardie boards together is actually very easy, but there are a number of ways that contractors get it wrong; Gaps: Hardie boards should be joined in “moderate contact”. This means that the boards should be touching each other when they are installed. There is no need to leave a gap for expansion.

Will cement board hold screws?

Cement board attached to plywood or similar underlayment will hold with only 1 1/4-inch screws; for thick or heavy metal fixtures, use 1 5/8-inch screws. In general, 1 1/2-inch galvanized nails will hold the board firmly in place.