Is comfort height the same as chair height?

While comfort height and chair height are two varying terms, they refer to a toilet of the same height. Comfort height is a brand-related term for chair height, whereas chair height is the common term for toilets with a minimum height of 17 inches.

How tall is a comfort height toilet?

Comfort height toilets (or “right height” toilets) have higher seats than traditional toilets, usually between 17 inches and 19 inches.

How tall is a chair height toilet?

Chair-height toilets are designed to make it easier to sit down or stand up, as they're slightly taller than the standard porcelain throne. They're 17 to 19 inches high at the seat.

Are chair height toilets better?

The higher bowl height can be good for the knees and back and can offer real advantages to taller folks, the elderly and people with mobility problems—these toilets are extremely popular and widely used. But comfort height isn't comfortable for everyone.

Is universal height the same as chair height?

Universal Height refers to a toilet or integrated unit's seated height as measured from the floor to the top of the seat. While most universal height toilets are between 17″-19″, some companies, like TOTO, use the term to describe any toilet with a seated height of 16.5″ or taller.

Why Do You Need a Comfort Height Toilet vs Standard Height?

What is the difference between comfort height and ADA toilets?

A comfort height toilet is sometimes known as an Americans with Disabilities Act (ADA) toilet because the height matches that used for ADA-compliant toilets, 17 to 19 inches from floor to seat. This is like the height of a chair. The height of a standard toilet is about 15 inches from floor to seat.

What toilet height is best?

Toilet Height

Standard-height rims are 14- to 15-inches from the floor and should work well for shorter people. If you're taller, consider chair height toilets that have a toilet seat height of 17-inches or more.

What height toilet is best for seniors?

What is the Proper Toilet Seat Height for Seniors? The Americans with Disabilities Act (ADA) indicates that toilets must be between 17 and 19 inches from the floor, including the seat. It should be high enough so that sitting and standing are not excessively difficult. Both feet should rest flat on the floor.

Which is better round or elongated toilet?

Elongated bowls are also considered more 'hygienic' in that the larger surface area of the bowl makes is easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.

How do you measure for a replacement toilet?

Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you're considering.

What is comfort height vanity?

Comfort Height: In recent years, taller, comfort height vanities have grown in popularity. Comfort height bathroom vanities measure to be about 36 inches in height, compared to the standard 30-inch or 32-inch. The extra inches have become more common as the human population is taller than they were 100 years ago.

Is one piece or 2 piece toilet better?

One piece toilets are typically heavier and easier to clean, and there's less space for bacteria to grow. Because two piece toilets feature a detachable tank, they're more customizable for preferred styles and heights. Both styles can include bells and whistles like bidet attachments or low-flow energy saving.

What are the different heights of toilets?

Toilet height is measured from the floor to the top of the seat. Heights vary enough to be noticeable. Most often, they fall somewhere between 15” and 19”, with standard toilets coming in under 17”. However, chair height toilets, what Kohler refers to as Comfort Height® toilets, measure 17” or more.

Can I put an oval toilet seat on a round toilet?

An elongated bidet seat will still mount on a round toilet, as well as function just fine, but the aesthetics and comfort of the seat will be greatly diminished.

What height is a handicap toilet?

The newest and most popular comfort height is typically around 16 1/8” floor to rim. The standard ADA (Americans with Disabilities Act) height toilets must have, a 17”-19” floor to bowl rim height, including the seat. You should also consider the toilet rough-in from the wall, which is commonly 12”.

Why are toilet seats so low?

When modern plumbing came into existence, the toilet fixtures may have been designed to accommodate what people were used to. When it comes to toilets, the way to go may have been low. Over the decades as societies and plumbing fixtures evolved, many people found higher toilets to be more comfortable.

How do you pick a toilet for a small bathroom?

Most people find elongated toilet bowls to be more comfortable, but in a small bathroom, a round bowl can save space. Elongated toilet bowls measure up to 31" from the wall, while round fixtures max out at 28". Because round bowls are less expensive than elongated bowls, they save a few dollars, too.

Should you caulk toilet base?

Caulk Keeps the Toilet Secure

Think again! Caulk keeps your toilet secure the floor, and avoids any chance of injury or toilet malfunctioning. It's actually required by the International Plumbing Code to caulk a toilet to the floor, and now knowing the reasoning behind it, why would you not want to?

What are the pros and cons of a one-piece toilet?

Why are one piece toilets more expensive?

Single piece toilets are generally more expensive than two piece toilets due to the production process. To put it simply, a one-piece toilet is made of several small pieces. Firing and assembling all the elements into one takes skill.

What is the best height for bathroom vanities?

The standard height for a bathroom vanity is about 30 to 32 inches. On the other hand, a comfort height bathroom vanity matches kitchen countertop height at 36 inches. Most adults prefer comfort height vanities, though the standard height is easier for children.

Why are bathroom cabinets shorter than kitchen cabinets?

Because bathrooms are usable working with less square footage than a kitchen, standard bathroom cabinets are about 21 inches deep. The extra few inches of depth provide you with ample storage space for all your cookware and more. Along with the depth, the height of the kitchen and bathroom cabinets is also different.

Do all toilets fit the same?

As far as the overall size of toilet itself, getting the proper rough will allow the toilet to fit the space. Toilet sizes vary beyond the rough though. Round bowls don't project out as much as elongated, and then there are variations within the round and elongated categories as well.

How do I know if my toilet is a 10 or 12 rough?

If your toilet has four bolts rather than the standard two, you'll measure to the center of the rear bolts. The standard rough-in measurements are 10, 12 and 14 inches. If your measurement is in between these intervals, round your number down to the nearest standard measurement.