Is code 53 a grade of cement?

OPC 33 grade, 43 grade and 53 grade cements are used for General purpose engineering such as building construction. The43 grade OPC is stronger than 33 grade cement and 53 grade cement is still stronger than 43 grade cement.

What is the 53 grade cement?

53 grade cement means that the compressive strength of the cement after 28 days is 53 N/mm² when tested as per Indian Standards under standard conditions. 53 grade cement has a fast setting time as compared to 43 grade cement. This grade of cement is not used for ordinary works.

Which cement grade is best 43 or 53?

Which cement is OPC 53?

Ordinary Portland Cement (OPC-53)

Why is OPC 53 grade cement?

OPC 53 Grade cement is required to conform to BIS specification IS:12269-1987 with a designed strength for 28 days being a minimum of 53 MPa or 530 kg/sqcm. 53 Grade OPC provides high strength and durability to structures because of its optimum particle size distribution and superior crystallized structure.

Different types of cements with IS code and cement grade characteristic

Which is the best 53 grade cement?

Which grade cement is best for RCC?

OPC 53 Grade cement is recommended in all RCC structures like footing, column, beam and slabs, where ever initial and ultimate strength is the major structural requirement.

Which is better OPC 43 and OPC 53?

OPC 53 sets quicker than OPC 43 and has a quite low initial setting time. It is used in structures where rapid strength gain is required like large load bearing structures like bridges, huge buildings, etc. OPC 43 on the other hand doesn't set so quickly and has a normal initial and final setting time.

What is the difference between 53 grade and 43 grade?

53 Grade OPC cement is Used in RCC and pre-stressed concrete of higher grades, cement grouts, instant plugging mortars etc. where initial higher strength is the criteria. 43 Grade OPC Cement is commonly used for plastering works, Non-RCC structures, pathways etc where initial setting time is not of importance.

Is codes for ready mix concrete?

As per Indian Standard code of practice (IS 4926) Ready Mixed Concrete (RMC) is defined as the concrete delivered in tailor- made condition and requiring no further treatment before being placed in position in which it is to set and harden.

Is code for strength of cement?

IS : 4031,(Part 6 >--'1988. 0.1 This Indian Standard ( Part 6) (First Revision) was adopted by the Bureau of Indian Standards on 10 March 1988. after the draft finalized by the Cement and Concrete Sectional Committee had been approved by the Civil Engineering Division Council.

Is code for composite cement?

Composite Cement is covered under IS: 16415-2015 and presents a good opportunity to produce high strength concrete which is highly durable. Composite cement is a mixture of high quality clinker (IS:16353-2015), fly ash (IS:3812 (Part 1) - 2013), granulated slag (IS:12089-1987) and gypsum.

What is the meaning of 53 43 and 33 grade of cement?

The initial strength of 53 grade cement is higher than 33 grade or 43 grade cement. The strength of 53 grades does not increase much after 28 days due to initial strength increases, while 33 grade and 43-grade cement are gaining strength even after 28 days.

Is 1489 a grade of cement?

Since IS: 1489 (part I) is formulated to give strength of the order of 33- MPa only, the marking 43- MPa/53- MPa on cement bags is misleading as the consumer can not reject the consignment in the case of lower strength.

Can we use 53 grade cement for plastering?

OPC is available in market in 3 grade 33, 43 and 53. But out of OPC grade, OPC43 is the best cement used for plastering in India for residential building and 53 is best cement for plastering of high rise building ,it has long lasting and life. But the most best cement is OPC 43 used for plastering work .

Which cement grade is best for roof?

Use of OPC 53 grade and PPC ( Portland pozzolana cement) is the best cement for roof dhalai and for all type of RCC structure like footing,slab, beam and column.

Which cement grade is best for slab?

Ordinary Portland cement of 53 Grade is suitable for all types of RCC structures and is mainly used for the construction of slabs. Because in the Construction of slabs, initial and ultimate strength is the major structural requirement.

Which grade cement is best for tiles?

43 grade cement is generally used for RCC work and slab casting, while 53 grade cement is used for plastering of flooring, tiles, etc.

Is 43 grade cement good for house construction?

43 Grade OPC Cement is recommended for plastering ,tiling , masonry works, Non-RCC structures, pathways etc. where initial days strength is not of prime importance.

Which is the best 43 grade cement?

1. Ordinary Portland Cement (OPC) 43 Grade Cement: It is used majorly for wall plastering works, Non-RCC structures, pathways etc. 43-grade cement attains a compression strength of 43 Mpa (megapascals) in 28 days of setting.

Which cement is best for RCC OPC or PPC?

Both OPC and PPC cements are good for construction of concrete slab. OPC is the most commonly used cement in industrial and large construction, PPC is most commonly used for small residential constructions. PPC is used where possibilities of sulphate attack is higher as it has good sulphate resistance compared to OPC.

What is OPC and PPC cement?

PPC (Portland Pozzolana Cement) is a variant of OPC (Ordinary Portland Cement.) These two type of cement differs from each other in terms of component, strength, heat generation, the percentage of several components, durability, grades, cost, eco-friendly nature, application, setting time, curing period etc.

What is the full form of OPC cement?

Ordinary Portland cement (OPC) is mostly used for stabilization purposes and works best with sandy soils.