Is Clorox bleach the same as pool shock?

Swimming pool shock contains 12.5% sodium hypochlorite (bleach) vs. 6-8.5% for Clorox (bleach). Some Clorox products go as high as 8.5%. At a 12.5% concentrate, liquid pool shock is approximately 2x's stronger than Clorox bleach.
Takedown request   |   View complete answer on eztestpools.com


Can you use bleach instead of pool shock?

Bleach is safe and the only chemical you should be using in your pool unless cleaning pool tile with baking soda. So yes, you can use bleach to keep your pool water chemistry balanced.
Takedown request   |   View complete answer on ironmanpoolcare.com


Can you use Clorox bleach as pool shock?

Now you can know the gallons of bleach you would need to shock your pool as follows: use 0.5 gallons of Clorox per 10K gallons of water to increase the level of chlorine by 5 ppm. If you want to raise the level of chlorine by 2.5 ppm, then you would need ¼ gallon of the product per 10K gallons of water.
Takedown request   |   View complete answer on poolpeace.com


Is shock and bleach the same thing?

Chlorine and shock are not the same thing. Shock has a more intense chemical strength than the traditional chlorine sanitizers, and it also differs in how you should apply it to your swimming pool.
Takedown request   |   View complete answer on hthpools.com


Is household bleach the same as pool chlorine?

They are identical in every way, with the exception of strength. Household bleach is usually a 6% concentration (although some of the cheaper stuff is 3%), while pool chlorine can typically be found in strength between 10% and 12%. All of this is sodium hypochlorite, and works the same in sanitizing your water.
Takedown request   |   View complete answer on pstpoolsupplies.com


Using Clorox Bleach in Your Swimming Pool



Which is stronger bleach or pool chlorine?

Answer: It is true that pool chlorine is stronger than bleach. For bleach and water to be the same strength as pool chlorine and water, you would have to adjust the ratio, increasing the bleach and reducing the water. But no matter which chlorine you use, make sure to test a small area before doing the job.
Takedown request   |   View complete answer on orlandosentinel.com


Is Clorox bleach the same as chlorine?

Pool-grade chlorine and a jug of Clorox are essentially the same thing, chemically. However, they're not made with the same concentrations of chlorine. Pool-grade chlorine, which you can usually buy in tablets, granules, or as a liquid, tends to be available in formulations of between 65% and nearly 100% chlorine.
Takedown request   |   View complete answer on riverpoolsandspas.com


What is a substitute for pool shock?

Common unscented household bleach (sodium hypochlorite) works well to shock a pool.
Takedown request   |   View complete answer on budget101.com


How much bleach equals a bag of shock?

One pound of 65% Cal-Hypo is equivalent to 117 fluid ounces (0.91 gallons) of 8.25% bleach. One pound of non-chlorine shock (43% MPS) is "equivalent" to 36 fluid ounces (0.28 gallons) of 8.25% bleach, but non-chlorine shock is not the same as chlorine.
Takedown request   |   View complete answer on troublefreepool.com


Will bleach clear up a green pool?

Green algae, unlike its black counterpart, is a true algae; it isn't resistant to chlorine, so you can control it by shocking the pool. If you don't want to spend a lot of money on expensive pool chemicals, you can shock with household bleach.
Takedown request   |   View complete answer on hunker.com


Can I put bleach in my pool instead of chlorine?

The solution to maintaining a clear pool is to use readily available liquid bleach as your chlorine source. Chlorine bleach, as discussed above, is not bound to a stabilizer, so when you add chlorine bleach to the pool, it will go right to work killing microbes and sanitizing.
Takedown request   |   View complete answer on fix.com


How long after adding bleach to pool Can you swim?

It is a good idea to wait at least 20 minutes after adding the water balancing chemicals. If you use calcium chloride in your pool, you should wait at least 2 hours to swim.
Takedown request   |   View complete answer on homex.com


How much Clorox do I put in my pool?

If you need to calculate how much bleach or Clorox you need to shock your pool, you will have to use 1/2 gallon of bleach per 10,000 gallons of water to raise the chlorine levels by 5 ppm.
Takedown request   |   View complete answer on h2ouse.org


How much chlorine do you need to shock a pool?

Generally speaking, the dosage amount of pool shock is 1 lb. per 10,000 gallons, but consult the shock package label.
Takedown request   |   View complete answer on intheswim.com


Is it OK to put bleach in a pool?

6 reasons why you should avoid disinfecting your pool with bleach instead of chlorine. Finally, if it is not properly dosed, bleach can become dangerous for bathers! Pool water that is too concentrated in bleach can become toxic, irritating the eyes, skin, and respiratory tract of swimmers.
Takedown request   |   View complete answer on iopool.com


What happens if you put too much bleach in a pool?

Excess chlorine can alter the pH level of the water in the pool, making it more acidic. The acid levels can cause any of the following symptoms: Irritant dermatitis which is a red skin rash characterized by raised itchy red bumps. Eye irritation and over-dilated blood vessels in the eyes.
Takedown request   |   View complete answer on backyardpoolsuperstore.com


How often should I put bleach in my pool?

Once you've obtained a good reading, you can usually maintain your chlorine levels by adding chlorine tablets once a week. These dissolve more slowly and will keep your chlorine levels stable.
Takedown request   |   View complete answer on homedecorbliss.com


What happens if you swim in a shocked pool?

What Happens If You Swim In A Shocked Pool? If you do not wait for the chemicals used to shock a pool to totally dissolve then you could be placing yourself in serious danger by swimming in it. At the minimum, you will feel itchy skin and eyes because of the chemicals present in the water.
Takedown request   |   View complete answer on triathlonbudgeting.com


Can you put bleach in a vinyl pool?

High concentrations of chlorine (above 1.5 ppm) will attack the liner and bleach it, thus damaging it. Any level below this range will weaken its ability to kill off bacteria.
Takedown request   |   View complete answer on looploc.com


Will baking soda clear a green pool?

Will baking soda clear a green pool? No. Baking soda will only raise your alkalinity and pH levels and this will not kill algae. Chlorine is what kills algae.
Takedown request   |   View complete answer on swimuniversity.com


Does baking soda clear pool water?

Baking soda can work wonders in a pool. Baking soda can: Help to clear cloudy water and restore the sparkle. Spot-treat algae.
Takedown request   |   View complete answer on poolandpatiopros.com


Can I put vinegar in my pool?

Just like you run vinegar through your coffee pot to get rid of calcium buildup, white vinegar can wipe away this eyesore in your pool. Mix a 50/50 solution of vinegar and water, dip a sponge or soft cloth into it, and scrub that residue away.
Takedown request   |   View complete answer on swimuniversity.com


What does borax do for a pool?

Borax acts as an effective pH buffer and helps prevent algae growth in swimming pools. Plus, it will leave your water looking sparkly and feeling soft.
Takedown request   |   View complete answer on ingredi.com


How do I make my pool water sparkle?

Five easy steps to a sparkling clean pool
  1. Circulate the water. Pool chemicals need to be evenly distributed if they are going to work most effectively. ...
  2. Clean the filter. The filter is one of your pool's most important components. ...
  3. Brush and vacuum. ...
  4. Test the water. ...
  5. Use the right products.
Takedown request   |   View complete answer on bioguard.com.au
Next question
Are swimmers the most fit?