Is attic spray foam worth it?

A properly done spray foam job not only insulates but also greatly reduces the air leakage of a home. But that only works if the installer can get it into the places where most of the air leakage happens. In an attic, the eaves are one of the most critical places to get good coverage with the foam.

Why you shouldn't spray foam your attic?

It Should Only Be Installed by Professionals

It cures with an exothermic reaction that generates a lot of heat, and if you put it on too thick, it can cause fires.

Is spray foaming your attic a good idea?

That's because open-cell spray foam can transmit air and moisture. Closed-cell spray foam is a better choice for keeping subfloor moisture at optimal levels, while open-cell spray foam is a better choice for walls and attics, because it allows homes to “breathe,” Yates said.

What are the disadvantages of spray foam insulation?

Is spray foam insulation worth the extra money?

If you see the benefit of insulating your new construction home correctly from the start for long-term comfort, energy savings month after month, and fewer headaches while you live in the house, then spray foam insulation may very well be worth the extra cost to you.

Spray Foam Insulation — The Ugly Truth?

When should you not use spray foam insulation?

What is the R-value of 4 inches of spray foam?

Spray Foam Insulation R-Value

Open cell spray foam insulation is R-3.6 to R-3.9 per inch. This R-Value is normal for open cell spray foam.

Does spray foam devalue your house?

In fact, according to Heritage House, they have seen entire roofs rotted and unrecoverable after SPF has been used. They state that by using SPF in your roof, '…you will devalue your home by the amount that a new roof will cost, and more. ' And we agree.

Does spray foam insulation increase home value?

Home inspections coupled with lower energy bills will certify your home's thermal efficiency and value. Investing in ThermoSeal Spray Foam Insulation will boost your home's resale value making it the best investment money can buy.

Can mold grow on spray foam insulation?

As a product, spray foam insulation does not attract mold. And unlike wood or metal, spray foam does not rot, rust or deteriorate. This means that an area properly sprayed with foam insulation will never become a food source or a hospitable environment for a mold colony.

Should I spray foam my attic rafters?

Spray Foam Attic Rafters

Insulating the attic rafters with spray foam creates a conditioned space where your attic is the same temperature as the rest of your home. This keeps the external weather and moisture outside of the attic space so you don't have to worry about any moisture problems or air infiltration.

Can spray foam rot your roof?

Studies show that open-cell spray foam is risky in colder climates. Indoor moisture diffuses through the foam and comes in contact with the cold roof sheathing. The spray foam traps the moisture against the roof, which results in eventual decay.

Which is better spray foam vs blown in insulation?

Between spray foam and blown-in cellulose, which is better? Both spray foam and blown-in cellulose insulation have their advantages. Spray foam has a higher R-value, so it's the more effective insulator.

How long does spray foam insulation last?

Typical Insulation Lifespan

The International Association of Certified Home Inspectors states that spray foam insulation, wrap tape and housewrap insulation can last for more than 80 years. At the same time, cellulose, loose-fill, foamboard, loose fill and rock wool insulation can last up to 100 years.

Is spray foam insulation better than fiberglass?

Spray foam insulation has a higher R-value than fiberglass, making it a better insulator. Another difference between them is that spray foam is watertight while fiberglass cracks under moisture. However, installing spray foam requires a professional while fiberglass is easy to install yourself.

Which spray foam insulation is best?

Closed cell foam is the best choice for robust insulating where space is an issue, as it can achieve 2x the R-Value of open cell inside a standard wall. Its rigid nature also adds to the structural integrity of the building and E84 fire rated versions are available.

How much difference does spray foam insulation make?

Spray foam creates an air barrier and insulation barrier at one time. It prevents heat transfer; reduces the likelihood of mold; and increases the energy efficiency for your home. With fibreglass batts, creating an airtight seal requires additional work.

Why do mortgage companies dislike foam insulation?

So why is it a problem for mortgage lenders? By sealing the roof space with this material, air circulation can be restricted to the roof and timbers. This can lead to condensation, which in turn can eventually lead to the rotting of the wooden roof supports.

Is spray insulation a good idea?

Spray foam great insulating properties and is relatively easy to get into difficult to reach areas where traditional insulation simply wouldn't work or would be very difficult to make work.

Which type of loft insulation is best?

Firm boards of either synthetic or natural materials, this is the best solution for insulating the underside of your roof. The boards provide highly effective insulation for your loft space and can also be decorated over.

How thick should spray foam be in attic?

Now generically speaking, we usually recommend open cell spray foam to be 6- to 10-inches on a roof deck or ceiling and 3-inches in the walls. Closed cell spray foam should be 4- to 5- inches on the ceiling and 2- to 3-inches in the walls.

Do you need a vapor barrier with spray foam?

A vapour barrier is not necessary with closed-cell foam but with open-cell spray foam such as Icynene®, it is sometimes required. Any air that migrates though a building envelope will carry water vapour. As Icynene® spray foam creates a seamless air-seal, it controls air leakage and the moisture in the air.

What is the thinnest insulation with highest R-value?

Aerogel insulation offers the highest R-value of any insulating material at less weight and thickness—ideal for construction, refineries, pipelines, and thin-gap thermal barriers.