Is 7.8 pH too high for pool?

Proper pool pH is right in the middle — pool pros recommend that pH be between 7.3 and 7.6 for optimum performance and cleanest water. If the pH gets higher than 7.8, the water is becoming too alkaline. When water is too alkaline, it reduces the effectiveness of the chlorine — the pool chemical that kills pathogens.

Is it safe to swim in a high pH pool?

Aim for a pH level of between 7 and 7.6. If the water pH is higher than 8, anyone who swims in the pool is at risk of skin rashes, while a pH of lower than 7 can sting swimmers' eyes.

What do I do if my pool pH is high?

When you've determined that your pool pH is too high, there are two ways you can balance it: dry acid or muriatic acid.

Can you swim in 8.2 pH?

The pH range of 7.2 to 7.8 should be considered an IDEAL range, not the minimum and maximum. Many pool service companies have been successfully maintaining the pH between 7.8 and 8.2 on tens of thousands of pools without reports of disease or algae outbreaks resulting from high pH.

Will pool pH lower on its own?

Minerals that decrease the pH build up naturally over time. If you let this happen the pH is going to go down on its own. Continue to use the test strips to check the levels and you should change the water once it gets below the recommended pH.

How To Lower pH Level In A Swimming Pool

Is it safe to swim in a pool with high pH and alkalinity?

Can You Safely Swim in a Pool With High Alkalinity? As long as you have enough chlorine in your pool (around 3ppm for total chlorine) and the pH level is balanced (between 7.4 to 7.8), then a pool with high total alkalinity is still safe to swim in.

How do I lower the pH level in my pool fast?

To bring down pH, use a made-for-pools chemical additive called pH reducer (or pH minus). The main active ingredients in pH reducers are either muriatic acid or sodium bisulfate (also called dry acid). Reducers are readily available at pool supply stores, home improvement centers and online.

How do I lower the pH in my pool without chemicals?

Why is my pool pH always high?

The most common reason for a consistently high pH level in pools is the use of liquid chlorine or a saltwater system as the primary sanitizer. Sodium hydroxide is produced, which has a pH of around 13. New pool plaster or pebble finishes will also raise pH in pools for about a year after installation.

Will vinegar lower pH in pool?

Ordinary household vinegar could in theory be used to lower the pH of your pool. The pH of vinegar is about 2.5, which is quite acidic when compared to your pool water. Household vinegar is very weak though (when compared to a strong acid like muriatic acid), so you would need quite a bit to lower pH.

Does high chlorine cause high pH?

High chlorine levels decrease the pH of your pool's water, making it more acidic. The more acidic the water, the higher the likelihood of corrosion.

Does Shocking a pool lower alkalinity?

Another cause for high alkalinity can be when you shock the pool. While this is performed to quickly rid the pool of pollutants, chlorine-based pool shock is highly alkaline, and can raise the water's total alkalinity level in the process.

Will baking soda lower pH in pool?

Baking soda, also known as sodium bicarbonate is naturally alkaline, with a pH of 8. When you add baking soda to your pool water, you will raise both the pH and the alkalinity, improving stability and clarity.

How quickly does pH reducer work?

After adding pH increaser or decreaser you'll want to wait about two to four hours, although some chemical manufacturers suggest a full turnover cycle, before retesting. The smaller the increments you need to adjust for pH, the less time you'll need to wait for the results to become stable.

How do I lower my pH naturally?

A simple way to lower the pH in your water naturally is to use lemon juice. Simply drop 2-3 drops of lemon juice to an 8 fl oz (240 mL) glass of water. The acidity of a lemon naturally lowers the pH level of the glass of water.

How do I lower the pH in my pool without alkalinity?

You can decrease pH without lowering the Total Alkalinity using Carbon Dioxide (CO₂) injection for pH control. Still, this does not lessen one without an effect on the other. When CO₂ is injected into water, it forms carbonic acid (H₂CO₃), which will reduce the pH.

Does liquid shock raise pH?

Using Liquid shock or liquid bleach regularly will increase your pH so make sure you keep an eye on your pH and alkalinity levels.

What is a pH Decreaser?

pH Decreaser gradually lowers your pH and alkalinity until at the desired level, and also prevents scale build-up and cloudy water that also usually occurs when your spa operates at the high-end of the pH scale.

Do I adjust alkalinity or pH first?

Check Total Alkalinity (TA) first, then adjust for proper pH range. Proper TA will buffer pH, that is, it will help to prevent pH fluctuations. Use fresh, high quality test strips. Excessively high bromine or chlorine levels can result in false pH and TA readings.

What is the difference between pH and alkalinity?

pH tells you whether the water is acidic, neutral or basic, but not the buffering capacity of the water. Buffering capacity is the ability of water (or compound) to resist a change in pH. Alkalinity tells you the buffering capacity in the basic pH range of the water.

What chemicals should I balance first in my pool?

Total Alkalinity (TA) is the first thing you should balance in your pool water. TA refers to the amount of alkaline material in the water. And since alkaline is a pH stabilizer, the number of alkaline substances in water will affect the pH balance. The ideal Total Alkalinity range for pool water is 80 – 120 ppm.

How do you tell if there is too much chlorine in a pool?

If the chlorine smell is very strong, however, you may soon spot “red-eyed” swimmers emerging from the pool. That's when the pool water is assumed to have “too much chlorine” in it. Ironically, a strong chemical smell around the pool and “swimmer red eye” may be signs that there is not enough chlorine in the water.

Is it better to have high or low pH in pool?

Anything below 7 is considered acidic, while above it alkaline. In swimming pools, the optimum pH level is 7.4 – the same as that of our eyes and mucous membranes. It is also the right level for chlorine to work efficiently.

Can you adjust pH and chlorine at the same time?

What is this? Add them one at a time waiting 10-30 mins between different chemicals (except for pool shock or cal-hypo – wait 24 hours). Granular chlorine, pH and alkalinity adjusting chemicals can be dissolved first in a bucket of water. But not at the same time of course.

What household items lower pH in pools?

Most pool experts recommend a pool pH between 7.2 and 7.8. To raise or lower pH, a pool custodian simply adds acids or alkalis into the water. For example, adding sodium carbonate (soda ash) or sodium bicarbonate (baking soda) will generally raise the pH, and adding muriatic acid or sodium bisulfate will lower the pH.