Is 2 feet deep enough for fence posts?

The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).

Is 2 feet deep enough for 8 foot post?

For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you'll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone. For gateposts, you'll need concrete too.

How deep should a 2 foot post be in the ground?

As a general rule of thumb, you'll need to place at least 1/3 the height of the post in the ground. For example, a 6-foot tall fence will need at least 2 feet of post in the ground. Consider the frost line in your area.

How deep should posts be for a 3 foot fence?

The general rule of thumb when setting a post is that the depth of the post's hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.

Should fence posts be set in concrete?

Concrete provides a strong foundation for wooden fence posts, but can rot them more quickly. Setting them in dirt, with or without gravel or crushed rock depending on your soil type, can help the posts last longer before going rotten. You can also use metal fence post anchors to prolong their life.

No Concrete Fence Post Install!

How long will a treated 4x4 post last in the ground?

A treated 4×4 will last 20 to 25 years in the ground if the conditions in the soil and climate are favorable. That number could increase to 40 to 75 years if you install the treated 4×4 in a cement ring rather than the soil. There are a few factors that influence how long the 4×4 can last in the ground.

How many bags of concrete do I need for a fence post?

Most fence post holes will need between 1 - 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.

How deep should a 6ft fence post be?

The width of the post hole should be 3 times the width of diameter of the post. For example, if you are erecting a 6 foot high fence using 4 inch fence posts, the posts need to be 6 feet above the ground. 6 divided by 3 is 2, therefore the depth of the hole required is 2 feet.

How deep should a 4 ft fence post be?

Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).

How many bags of quikrete do I need for a fence post?

1 – 4 bags of concrete per fence post are typically what's needed. This depends on the type of soil, fence design, height, post size and bag weight. In general the depth of the post's hole needs to be 1/3 to 1/2 of the above ground height of the post.

What size fence post do I need for a 5ft fence?

Calculate the post lengths

Use 4in x 4in posts for fences of 5ft and over and 3in x 3in posts for anything under 5ft.

What size Post do you use for an 8 foot fence?

A common rule of thumb, is to dig the hole 3 times as large as the post, and to a depth of 1/3-1/2 of the post height above ground. so for a 8' high fence, using 4x4 posts. dig the holes 12" in diameter, to a depth of 2 1/2 - 4'. Of course, that's assuming you're setting the posts in concrete.

How big of a hole do you need for a 4x4 post?

The diameter of your post hole should be three times the diameter of your post. So, if you're planning on using a four-inch round or 4x4-inch square post, your post hole will need to be 12 inches in diameter. For a six-foot-high fence post, we would need a hole that's 36 inches deep and 12 inches in diameter.

How far apart should fence post be?

Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn't cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.

How do you install a fence post without concrete?

How much concrete do I need for a post hole?

A: Finding the right amount of concrete depends on the size of the hole and the size of the post. The diameter of the hole should equal about three times the diameter of the post and the depth of the hole should be about ⅓ to ½ the total length of the pole.

How do I put a post in the ground without concrete?

Can you put 6ft fence panels in 5ft posts?

6 foot into 5 foot posts should be ok, but you will need am infill panel inbetween the panels.... I've done this before by adding two strips of batten (or similar) down the edge of the panel to bring it proud of the post, then just add a piece of timber to cover the whole post and your 2 foot gap.

How deep should a concrete fence post be?

Dig your hole to the correct depth, allowing for the height of the fence panel and the gravel board. As a rough guide the hole should be a minimum 1/3 the height of the fence, so a 6 foot fence would need an 8 foot post in a 2 foot deep hole. Similarly, the hole should be three times the diameter of the post.

What is the best concrete mix for fence posts?

The best concrete mix for fence posts I've found is Quikrete Fast Setting Concrete Mix in a 50 lb bag. It's 4000 psi, easy to work with, sets up fast, and doesn't need to be mixed. Just pour it in the hole and soak with water.

How much area does a 50 lb bag of quikrete cover?

A 50 lb bag of concrete approximately cover around 1.5 square feet area upto standard depth of depth of 3 inch for your patio and sidewalk. A bag of 50 pound yields 0.375 cubic feet, thickness of slab 3″= 0.25 feet, so, a 50 lb bag of concrete covers = 0.375 ÷ 0.25 = 1.5 square feet.