Is 10w40 thicker than 10w30?

The difference between 10W-30 and a 10W-40 is the high temperature viscosity. Obviously, a 10W-40 is thicker than a 10W-30 at high temperature.

Is it OK to use 10W40 instead of 10W30?

The short answer is yes. Because both oils are formulated to give the same performance, it will be safe for you to use either oil. Some differences between the two oils include viscosity and base oil.

Which is better 10W40 or 10W30?

10W40 oil has a higher viscosity, retaining more thickness than 10W30 as the temperature rises. In that case, 10W-40 motor oil would technically provide better protection against engine wear contact in higher temperatures.

Should you use thicker oil in an older engine?

A: Yes. This is a practical method to improve oil pressure in an older, high-mileage engine. The slightly thicker oil film from the heavier base weight oil - 10W - can help protect worn engine bearings as well.

Which engine oil is thicker?

SAE50 is higher viscosity (thicker) than SAE40, and so on. Straight-weight oils come in a wide range of viscosities. But your car operates (ostensibly) in a wide range of temperatures. When your engine is running at operating temperature, it does not matter too much if it is summer or winter.

What does 10w30 mean? 'Engine Oil Explained'

Can I mix 10W30 and 10W40?

Mixing 10W30 with 10W40

Some say that mixing them is fine as long as you don't live in freezing weather. Even if you put together synthetic and conventional blends of these motor oils, they show no harm to your vehicle. However, this is true only if you mix in a quart of the other type to your usual engine oil.

Is 10W40 good for high mileage?

Designed for high mileage vehicles

Mobil 1 High Mileage 10W-40 motor oil is recommended by ExxonMobil for use in high mileage vehicles (even those that have used lower quality conventional oils^†), including: Cars. Trucks.

Which oil is best for old engines?

What happens when you use 10w40 instead of 5w30?

Your vehicle does not use 5W-30 oil. The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.

What happens if I put thicker oil in my engine?

Thicker Oil May Not Flow Quickly Enough

Its lower viscosity allows it to flow faster and fill the tiny clearances between parts, leading to a durable, consistent lubricating film. Not only that, but the engine will waste energy pumping the thicker oil, reducing fuel economy.

What uses 10W40 oil?

This oil weight is commonly used in diesel engines or in a smaller motorcycle engine too. The 10W-40 oil viscosity also often serves as an alternative for older engines with burning or oil leaking issues. Why is that? The 10W-40 engine oil has a thicker viscosity than, say, 10W-30 oil when the car engine is hot.

What is 10W-40 oil for?

Higher viscosity oil such as a 10W-40 can be useful for older engines burning or leaking oil. We offer Mobil™ 10W-40 high viscosity motor oils for use in vehicles with more than 75,000 miles, and a synthetic blend oil when cost is a consideration.

Is 10W40 fully synthetic?

Semi-synthetic oils such as 10W40 have long been the standard. Their base is refined crude oil, which is then blended with additives.

Is 10W30 better for high mileage?

10W-30 motor oil makes for a decent high-mileage oil. It gives a better fuel economy while reducing the oil consumption for older engines. Older engines with more than 75,000 miles on them require a thicker oil that will properly lubricate their critical engine parts and prevent oil leaks, sludge, and deposits.

Is 10w 40 better than 5W 30?

The 5w30 oil will flow better at low temperatures than the 10w40 oil. This means that the 5w30 oil will protect the engine better at low temperatures, usually when the engine is just starting or during weather conditions such as winter.

What is the best engine oil for hot weather?

There are a few ways to get your car prepared for summer with synthetic oils. If you're capable of changing your oil, you can find synthetics at auto retailers. Look for containers with codes such as 0W-20, 5W-20, and 5W-30. These correspond to specific synthetic oil mixtures approved for standard vehicles.

Will the wrong oil damage my engine?

Cause damage to engine life

The wrong engine oil can cause engine damage because it does not properly lubricate its components. This will lead to metal-on-metal contact since the moving parts are not being lubricated. Friction quickly follows, causing engine parts to wear.

What is best oil for high mileage cars?

Is it OK to use full synthetic oil in older cars?

It protects better, performs better, and lasts longer, and it's no longer made with a chemical compound that could hurt older vehicles. Modern synthetic oil is safe to use in all types of vehicles, ranging from new purchases to classics to aging not-so-classics.

Should you use synthetic oil in older engines?

Myth: Full synthetic oil is not good for high mileage cars or older vehicles. The myth is rooted in the idea that synthetic oil is “slipperier”—lower in viscosity, or not as compatible with seals and will therefore leak or leak more in places conventional oil might not. Again, completely untrue.

How long does 10w40 oil last?

Simply put, the shelf life of conventional motor or "lube" oil is up to five years. It's not something that goes bad in a couple of months.

What is 10w 30 oil recommended for?

10w30 is a multi-grade engine oil ideal for heavy-load engines because of its ability to withstand hot temperatures for a long time without compromising the performance of the engine. This engine oil has a viscosity grade of 10 in low temperatures and 30 in high temperatures.

What is the best 10w40 engine oil?

Castrol EDGE, an advanced full synthetic 10W-40 motor oil, is Castrol's strongest oil and a great option for those who want the very best for their car. Castrol GTX MAGNATEC is a premium full synthetic 10W-40 that offers superior wear protection.

Are all 10w40 oils the same?

The SAE grade (in this case 10W-40) only specifies the viscosity of the oil - it doesn't say anything specifically about the composition of the oil or any additives it may have.