How thick should jam be?

1) The Saucer Test

Once you think that your jam has reached its setting point or has thickened, spoon a bit of the jam on the cold plate and tilt it vertically so the jam runs. You are aiming for a slow descent, not a runny mess. If it runs slow, it's set!

What should jam look like when ready?

If it wrinkles and feels gel-like, it's ready to bottle. If it doesn't, keep cooking and test it every 5 minutes.

Will my jam thicken as it cools?

See, the truth is that the pectin web doesn't really solidify until everything cools down. That means it's tricky to tell whether you've achieved the gel point while the action is still hot and heavy. Enter the spoon: Before you start your jam, set a plate with a few metal spoons in the freezer.

Can you overcook a jam?

Your jam may taste bitter because it's over-cooked. Sometimes overcooked jam can be good thing, as it has a nice caramel flavour that will work well used in desserts. However if it's really overcooked the sugar will give it a bitter burnt taste. Sadly if the jam is burnt it's beyond saving.

Is homemade jam supposed to be runny?

Cook it again.

Cooking jam without pectin requires practice and patience. A runny batch happens even to the best home jammers. If, after waiting, you find the jam is still too loose for your liking, empty the jars back into a wide pot and cook again. Wash and sterilize the jars and try again.

Making Jam: How to Tell When the Jam Is Set

How do I know if my jam is set?

Pop a plate in the freezer at the beginning of your cooking time. Once you think that your jam has reached its setting point or has thickened, spoon a bit of the jam on the cold plate and tilt it vertically so the jam runs. You are aiming for a slow descent, not a runny mess. If it runs slow, it's set!

How long does jam need to boil?

The jam must then be cooked over high heat in order to evaporate the water as quickly as possible and harness the power of the natural pectin. (Cooking time can vary, depending on a fruit's water content, but once it's at a rolling boil, expect to cook it for at least 40 to 50 minutes.

Should you stir jam while it's boiling?

Do no stir jam once boiling, but use a wooden spoon to check it is not sticking on the base of the pan. Stirring lowers the temperature and delays setting point being reached. It is wasteful to remove scum too often. Do it at the beginning and at the end.

Does lemon juice thicken jam?

Without a little help, the pectin strands can't come together to form a network that will set your batch of jam — that's where the lemon juice comes into play.

Do you let jam cool before putting lids on?

Straightaway, place a waxed disc over the surface, then seal with a lid. Wipe the jars with a warm, damp cloth. Don't put the labels on until the jam is cold – otherwise the heat will prevent them sticking properly and they'll fall off for sure. Store in a cool, dry and preferably dark place.

What do you do if your jam is too runny?

A runny batch will just happen occasionally. If, after waiting, you find the jam is still too loose for your liking, empty the jars back into a wide pot and cook again. You can simply reduce the jam to your liking, or you can also add a small amount of commercial pectin to help the process.

Can I Reboil jam if it doesn't set?

If your jam won't set, tip it back into the pan, add the juice of a small lemon to give the jam extra pectin, bring it back to the boil for five minutes and test again for a set.

Why is my jam not setting?

Jam and jelly not setting is usually a problem that is caused by temperature, pectin problems, or incorrect measurements. Jellies cooked at too high a temperature can destroy the pectins' ability to gel while if it's not boiled long enough it won't set either.

How long should jam take to set?

Give the jam 24-48 hours to set up (because truly, sometimes it can take that long for pectin to reach the finished set). If it still hasn't set, it's time to determine how much jam needs to be recooked.

Will my jam set?

Setting point for jam is 105c (220F) so a good way to test for setting point is to have a sugar thermometer clipped to the side of your saucepan, with the end dipped in the boiling jam mixture. Once the boiling mixture has reached the correct temperature then your jam should set.

Do you seal jam jars when hot?

To seal jars

Fill the hot dry jars right to the top - preserves shrink slightly on cooling and a full jar means less trapped condensation. Seal the jars while still hot. This rule applies to all jams, jellies, pickles and chutneys.

What is the ratio of sugar to fruit when making jam?

The amount of sugar you need to make jam depends on the amount of pectin in your chosen fruit, but generally the fruit-to-sugar ratio for traditional jams is 1:1 (ie. 450g/1lb sugar to 450g/1lb fruit).

How can I thicken jam without pectin?

The secret ingredient to making jam without pectin is time. The fruit and sugar need plenty of time to cook and thicken. A long, slow boil drives the moisture out of the fruit, helping to preserve and thicken it at the same time. Fruit varies in water content as well, and some fruits may take longer to jam up.

Why do you heat up sugar when making jam?

Why heat the sugar? The faster jam is made, the fresher and more delicious it tastes. If you add cold sugar to jam, it will take longer to return to the boil and will taste less fresh.

Should you constantly stir jam?

Cooking the Jam

If the sugar is still dry, you'll need to stir continually until the juices run and the sugar melts. Once all the sugar is melted, you should stir very little or not at all. The less you stir, the faster everything heats up and the moisture cooks off.

Why do you put marbles in jam?

Adding marbles will help the mixture avoid sticking, but the stirring is the most important thing, once the mixture starts to simmer or boil.

How long should jam cool before refrigerating?

Let the jam cool for 20 to 30 minutes before filling the jars so the remaining fruit does not all float to the top. The jam will also continue to thicken over the weeks and months ahead. Due to a lack of space in my fridge, I processed this jam in a water bath for 15 minutes to seal the jars for shelf storage.

Should you water bath jam?

Do You Have To Water Bath Strawberry Jam? Yes, strawberry jam must be processed in a boiling water bath to prevent the growth of mold. If you don't process the jar in a hot water bath for some time, you are creating an ideal environment for germs or bacteria to thrive.

Do you have to put lemon juice in jam?

To set, jam needs the right balance of acid and pectin. High-acid fruits include citrus, cherries, green apples, pineapple, raspberries and plums. If you're using low-acid fruits, such as rhubarb, apricots, peaches and strawberries, you need to add lemon juice.

What is the secret in making jam?

Pectin is a natural gelling agent found in the skins/peels and seeds of fruit. I do not like using store-bought pectin. It makes jams taste dull. Instead, I add high-pectin citrus, such as lemon or lime juice, or use a high-pectin fruit along with one that is low.