How thick is EIFS stucco?

The total thickness of EIFS “Lamina” is generally 1/16” to 1/8” but can be thicker in areas of high-impact, by using high impact resistant mesh. Similar to stucco it is important to follow a proper design by a registered design professional or the EIFS manufacturer.

What is the thickness of EIFS?

The entire thickness of the EIFS system is typically, approximately 1/8"to 1/4", plus the thickness of the insulation board, which will vary, based upon desired R-value (insulation rating).

How many layers are in an EIFS?

There are 3 layers to EIFS, the Inner, Middle, and Exterior layers. The Inner layer is made up of Expanded Polystyrene (EPS) board that is secured to the wall surface with an adhesive.

What is the problem with EIFS?

The problems with barrier EIFS cladding all stem from water intrusion. These problems include moisture accumulation in the wall cavity, subsequent wood damage and, in more advanced cases, mold growth and the infestation of pests such as carpenter ants or termites.

What is better EIFS or stucco?

The fiberglass layer provides more durability, even against hard blows from weather. EIFS is notably lighter than traditional stucco, however. It is 80-percent less heavy than stucco, but it has a higher R-value, coming in between 4 and 5.6, which is notably higher than the 0.20 R-value of regular stucco.

What is EIFS Stucco and How It's SUPPOSED to Work

Is EIFS stucco still used?

Yet today, EIFS are still around. About 100 million square feet of EIFS went on new and remodeled homes last year, rivaling any other siding material.

How long does EIFS last?

A. Dryvit EIFS are designed to last for the typical design life of a building. The actual longevity on any specific building will depend mainly on the building maintenance program. Some EIFS facades date back 50-60 years.

How strong is EIFS?

According to the EIFS Industry Members Association, “EIFS can reduce air infiltration by as much as 55% compared to standard brick or wood construction.” The use of insulation board in the application of EIFS can increase the R-value of a building by R-4 per inch of insulation, thus reducing heating and cooling costs ...

What is the difference between Dryvit and EIFS?

Having a house with EIFS, also known as Dryvit, isn't the end of the world. EIFS isn't a disease; it's synthetic stucco. And even though your house may have been built using it, with knowledge and proper maintenance everything can be just fine. EIFS is an Exterior Insulation and Finish System.

Can you patch EIFS?

To fix deeper gouges, we cut out a small rectangle of the EIFS — no bigger than is needed to remove the damaged area — then fill it with a patch made from EPS foam.

What is the most common type of EIFS?

Barrier or Face Seal PB EIFS

This is the most common type of EIFS. PB = Polymer Based. Barrier means that the system is designed such that water should not get behind the exterior surface.

What is the finish coat of EIFS?

EIFS, also known as Exterior Insulation and Finish Systems, is an energy saving and durable cladding consisting of scientifically developed layers of materials that coordinate to restrict the transfer of energy and eliminate the accumulation of moisture.

How is EIFS attached to wall?

EIFS are typically attached to the outside face of exterior walls with an adhesive (cementitious or acrylic based) or mechanical fasteners. Adhesives are commonly used to attach EIFS to gypsum board, cement board, or concrete substrates.

How can you tell stucco from EIFS?

Go outside and knock on an outer “stucco” wall of your home. If it sounds hollow, there is a good chance you have EIFS. If it feels like you are knocking on a brick wall, it is more likely that you are knocking on traditional “hard-coat” stucco.

Does EIFS need a vapor barrier?

No. Although EIFS will minimize internal wall condensation by reducing the air infiltration as well as increasing the internal wall temperature (for heating climates) climates that normally would use vapor retarders should still use them with EIFS claddings.

Can you apply stucco over EIFS?

"Stucco" can be installed over foam insulation, like EIFS.

Does EIFS use wire mesh?

Durability of EIFS

Within the several layers and materials required for an efficient EIFS cladding is a durable mesh material. The Exterior Design Institute recommends a high-impact, reinforcing mesh that is double-strand, interwoven glass fiber.

Can EIFS be painted?

On a side note, EIFS can be painted just like traditional stucco. Depending on the characteristics and appearance wanted, our professional commercial paint contractors use either top-quality acrylic latex paints or elastomeric coating systems.

Is synthetic stucco the same as EIFS?

Synthetic stucco is commonly referred to as Exterior Insulating and Finish System (EIFS). Homes with this exterior finish are often strikingly beautiful, offer great flexibility in home design, and provide energy savings.

Why EIFS is the best?

Low maintenance: EIFS clad buildings have superior resistance to fading, chalking, yellowing, dirt, mould and mildew. They can be easily cleaned by just hosing them down, and hardly need painting.

Does EIFS have R-value?

Most EIFS use insulation board with an R-value of R-4 to R-5.6 per inch as the innermost layer in the wall system. When combined with standard wall cavity insulation, this extra layer can boost wall insulation from R-11 to R-16 or more.

Why should barrier wall EIFS be avoided?

MOISTURE ISSUES

The barrier in any EIF system is the basecoat and mesh layer. This layer will not allow the penetration of moisture and functions as the moisture-intrusion-preventing workhorse of the system.

Can you pressure wash EIFS?

The best way to clean EIFS is to use high water volume coupled with low water pressure and non-abrasive cleaners. Do not use caustic chemicals or abrasive cleaning techniques, which will permanently damage the finish.

How often should EIFS be painted?

What type of maintenance is required for EIFS? Unlike wood, stucco and other siding materials, EIFS rarely need painting. Most EIFS systems are specifically formulated with 100% acrylic binder, which gives EIFS superior resistance to fading, chalking and yellowing.

What is the difference between stucco and Dryvit?

Dryvit stucco is actually the name of a stucco manufacturer, not an actual stucco system specifically. Dryvit is the name of the stucco company and they have different stucco systems including 3 coat stucco systems, EIFS systems, decorative systems and more.