How thick is a ceramic coating?

To put it simply, a ceramic coating (also known as nano-coatings, quartz-coatings, or silica-coatings) acts as a thin protective layer that sits on top of your vehicle's clear coat. The main component is SiO2 or silicon dioxide. The thickness varies from 1 micron to 2 microns per applied layer.

How is thickness of ceramic coating measured?

Ultrasonic gages can be used to measure the thickness of structural ceramic products such as turbine blades, valves, and other engine components. Elastic modulus can also be calculated through measurement of longitudinal and shear wave velocities.

Can you put 2 layers of ceramic coating?

Yes, You Can Put Too Much Ceramic Coating on Your Car

Most professionals recommend that you put multiple layers of the protective coating on your car.

Is there a downside to ceramic coating?

Disadvantages of ceramic coating include the potential for scratches and water spots, high costs, and the need for professional installation. Several layers of liquid polymer and other strong materials create a powerful coat, but nothing can protect a car against everything.

How long does ceramic coating really last?

For the most part, ceramic coatings last between two and five years. In some cases, they can last up to a decade, but this is pretty rare. However, there are many factors that affect their lifespan and might force you to replace yours sooner than you'd expect.

Everything You Need To Know About Ceramic Coatings

Can you wax over ceramic coating?

The easy answer is yes, you can. You could lay the ceramic-based protectant down first, let it cure and then apply a wax.

Can you put ceramic coating over ceramic coating?

In order to reapply a nano ceramic coating you'll first need to use one of two approaches below to remove the old coating. Remember, you should NEVER apply a fresh ceramic coating on top of an old ceramic coating or an inferior surface protectant product, like car wax or paint sealant.

Can you wash a ceramic coated car?

The short answer is YES! You can take a ceramic coated car through a car wash but remember, not all car washes are the same. We recommend you stay away from automatic car washes that still employ abrasive brushes to clean your car. These abrasive brushes can damage the coating and your paint.

How do you tell if a car has been ceramic coated?

If you want to know if a car has a ceramic coating, take the car for a drive. Spray the car with water; as you increase the speed of the vehicle, water beads will gather into streams that will flow from your vehicle. In the absence of ceramic coating, the drops of water will cling to the car's surface.

Can ceramic coating be done in 1 day?

Depending on the existing condition of your paintwork, all of this can take several days' time. After that, the application of the coat takes just a few hours – but then we need to keep it indoors in an environmentally controlled space for 24 hours to allow it to cure properly.

Does clay bar remove ceramic coating?

Many professional automotive detailers prefer to use surface clay bars over polishes, since clay bars do not remove any clear coating from your car's surface – as long as it is used with clay lubricant.

How many microns thick is ceramic coating?

To put it simply, a ceramic coating (also known as nano-coatings, quartz-coatings, or silica-coatings) acts as a thin protective layer that sits on top of your vehicle's clear coat. The main component is SiO2 or silicon dioxide. The thickness varies from 1 micron to 2 microns per applied layer.

What is the coating thickness?

A coating thickness gauge (also referred to as a paint meter) is used to measure dry film thickness. Dry film thickness is probably the most critical measurement in the coatings industry because of its impact on the coating process, quality and cost.

How thick is clear coat?

What is clear coat? The clear coat is polyethylene paint without color pigmentation. Thickness usually ranges between 1.5–2.0 mils (35–50 microns).

What if it rains after ceramic coating?

Ceramic coatings need to cure for around 24 hours before being exposed to rain. Your car will need to be garaged overnight unless the weather forecast is for no rain.

What should you not do after ceramic coating?

Use only recommended mild soaps. Avoid high volume brush style car washes, and high PH detergent style cleaners. Avoid washing in direct sunlight to minimize streaking and water spotting. Wash from the top down leaving the dirtiest sections for last to avoid cross contamination.

Should you wax a ceramic coated car?

Just to set the record straight, yes, you can apply car wax to a ceramic coated surface. But it's going to cause far more issues than solutions. Routine cleaning, garage storage, and applying a high-grade SiO2 ceramic booster spray on top of your coating has proven time and time again to be the best form of protection.

Can I ceramic coat my car myself?

You can apply Nano Ceramic Coating to your car in your home using the DIY technique. However, in order to do this job yourself, you should be well aware of all the techniques or skills that are required for this procedure.

Can I ceramic coat my own car?

You absolutely CAN DIY ceramic coatings on your cars. However, you should heed these professional tips and make sure to put in the necessary time and effort.

Does iron remover remove ceramic coating?

Ceramic coatings can withstand an iron remover much more – in fact it's often a great way to bring back any lost water beading on a ceramic coated car. The biggest downside to using an iron remover too often is simply the cost.

Does vinegar remove ceramic coating?

If you do not have a dedicated detailing water spot removal product, then use distilled white vinegar. The vinegar's acidity breaks down and loosens light to medium concentrations of common minerals for removal.

Does polish remove ceramic coating?

Since the ceramic coating is a physical layer, polishing is the only surefire way to remove it 100% and expose the clear coat underneath. In fact, many of the high-grade professional ceramic coatings claim the only way to remove them is through machine polishing.