How soon can you swim in a new pool with Pebble Tec?

They usually do an Acid startup on Pebble finishes which takes about 7 days. Thats tough...they usually don't want you swimming in it for the first week. Also, don't know how large your pool is, but it could take 2 days or more to fill the pool up you know.

How long does it take for Pebble Tec to set?

Pebble Tec Explained

The very top layer of cement is then hosed away to expose the pebbles, and the pool is left to cure for about 24 hours. After that, the surface is acid rinsed and treated to bring out the pebbles' brightness.

Why do you need to brush New Pebble Tec?

Brushing a Pebble Tec surface is also very important, especially during the first few weeks after application, but also afterwards, to keep dirt and algae from building up on the slightly irregular surface. Be sure to use only a nylon pool brush, never use a steel bristled pool brush on a Pebble Tec surface.

Can you leave a Pebble Tec pool empty?

Does my pool need to be drained before cleaning pool tile or cleaning pebble-tec? No! - We lower your pool water just enough to expose all the pool tile calcium and pebble-tec calcium. In an effort to conserve water, We Never Need to Drain Your Pool.

Does Pebble Tec crack?

Traditionally, Pebble Tec pool repair is done after draining the pool. The problem with this is that when the hot sun shines down on the finish, further damage can occur. Even worse, structural cracking is always a concern when letting all or most of the water out of a swimming pool.

New Pool Heater: When Can We Use Our New Pool? (2018)

How long does Pebble Tec pool last?

How Long Will Pebble Tec Last? Traditional pool resurfacing materials require a high level of maintenance and will only last 5-10 years before it needs to be replaced. We generally would expect a Pebble Tec surface to last upwards of 20 years with proper maintenance.

Does Pebble Tec hurt your feet?

Cons of Pebble Pool Surfaces

Pebble pool finishes are generally pricier than plaster finishing, and it is true that pebble pool surfaces can be a bit rough on feet if not installed correctly.

Can Pebble Tec be exposed to sun?

The stone material is less impervious to attack or alterations in appearance due to lack of proper pool maintenance. The aggregate can be exposed to the sun without damage to the surface in most cases. The exposed aggregate can be rough on some people's skin making it less appealing than the smoother plaster finish.

How do you maintain a Pebble Tec?

How do you maintain a Pebble Tec pool?

brush your pool. It is recommended that you brush a PTI pool finish three times a day for the first three days and two times a day for the next ten days. Using a standard, nylon (very important) bristled pool brush. Brush the walls and the floor of the finish toward the main drain.

Can you shock a Pebble Tec pool?

Make sure you're keeping the alkalinity and calcium hardness in balance, and use a shock that's made of calcium hypochlorite. Liquid shock will work but it'll throw your pH to the moon, requiring the use of acid to lower it, which will tank your alkalinity, which will hurt the pebbletec.

Is PebbleTec really worth it?

It quarries its own stone so it can carry out its own quality control to create a visually appealing, high-quality finish. Pebble Tec is extremely durable. Compared to plaster pools that only last between 6-8 years, Pebble Tec pool finishes can last from 10-15 years.

Is PebbleTec waterproof?

With Pebble Tec^® Your Design Choices Are Unlimited.

It also serves as the waterproofing membrane and provides a smooth comfortable finish to relax on.

How soon can you heat a new pool?

Do NOT use a pool heater until all plaster dust has been removed from the pool. This can typically be accomplished between day 4 and day 10. Do NOT use these devices until AFTER the 28 days startup is complete.

How often should I brush my Pebble Tec pool?

Add pre-diluted chlorine or liquid chlorine to 1.5 ppm − 3.0 ppm level (IMPORTANT: For salt water (SWCG) pools, do not add salt within the first least 30 days). ____ Step #3. Brush the entire pool surface thoroughly at least twice daily to remove all plaster dust.

Does Pebble Tec have a lifetime warranty?

Pebble Tec also provides a lifetime warranty in Florida. Choices: Pebble Tec offers five distinct pool finishes: PebbleTec, PebbleSheen®, PebbleFina®, and PebbleBrilliance™ offer a wide variety of visually stunning, nature-inspired colors that blend beautifully into any outdoor environment.

Can you power wash a Pebble Tec pool?

As with any pool, a Pebble Tec pool needs to be drained before you clean it. Once drained, take the opportunity to survey it carefully for loose pebbles or cracked spots. You'll be pressure washing the Pebble Tec pool on very low pressure, so you'll need to use soap to loosen up the dirt before you start.

Which PebbleTec is the smoothest?

Made from our smallest natural pebbles, PebbleFina® delivers the smoothest aggregate finish available. The pool finishes that comes from this exclusive product line is enriched with additives that provide superior strength and long-lasting durability over a traditional pool replaster.

What is the smoothest pool finish?

Traditional white plaster (or marcite) gives pools a smooth, classic appearance and remains a popular choice despite the range of pool finishes that have emerged over the years. The most inexpensive pool finish option, it typically lasts five to seven years before any signs of etching or chipping appear.

How soon can you swim after plastering pool?

The plaster material cures under water in about 7-10 days. But this doesn't mean you have to wait that long. Once the pool is filled and clean, you can go in for a swim.

Is Pebble Tec a gunite?

Pebble Tec is the top choice for gunite pool buyers.

How long is the warranty on Pebble Tec?

Defects in workmanship are covered for a minimum of 5 years by the Authorized Applicator. These warranties are provided by the applicator or builder at the time of installation. Find your builder or applicator contact information.

How much does it cost to acid wash a Pebble Tec pool?

Average pool acid wash cost is $202, cost ranges between $178 to $225 for a pool measuring 500 square feet, according to Improvenet.com in the US in 2020.