How often can you shock a well?

Homeowners with private wells should have their well water tested every 3 to 5 years for some contaminants, including bacteria. If these tests turn up positive for bacteria, chlorinating the well may be a way to resolve the problem.

How long should you run the water after shocking well?

Run the water to flush the bleach solution out of the well. Monitor the process, it can take 30 minutes to 24 hours or more to flush all of the bleach solution from the well. Use chlorine test papers to verify that the water coming from the outside faucet or yard hydrant is clear of any bleach solution.

When should I shock my well?

Wells should be shock chlorinated when a well water sample result shows that there is bacteria in the water. Any time a well is opened for repair it must be disinfected. Newly-built wells should also be shock chlorinated following construction.

Should you shock a well every year?

Shock chlorination is recommended: upon completion of a new well or when an unused well is returned to service. if annual water test results indicate the presence of bacteria. if a well system is opened for any installation, repair or maintenance.

Is it good to shock your well?

Shock chlorination is a method of disinfecting a water well. It is recommended when a water system is contaminated with bacteria. Contamination can occur when the well is installed, when repairs are made to the pump or plumbing, or when rainfall runoff enters the well.

How to Disinfect Your Well

How often should you treat your well?

Homeowners with private wells should have their well water tested every 3 to 5 years for some contaminants, including bacteria. If these tests turn up positive for bacteria, chlorinating the well may be a way to resolve the problem.

Will shocking a well get rid of coliform?

When done properly, shock chlorination will kill all the bacteria existing in a well. A recent Penn State study of wells contaminated by coliform bacteria found that shock chlorination and installation of a sanitary well cap successfully removed the bacteria for one year in 15 percent of the wells.

Can you put too much bleach in a well?

According to AskingLot, if you put too much bleach in your well, it can destroy the good bacteria found in the well, which can be a significant problem! The company also says that you should dilute the bleach with water so the pipes do not get ruined.

What is the cost to shock a well?

To disinfect your well and eliminate the bacteria, you should chlorinate the well. You can hire a company that services wells to do the chlorinating. The cost ranges from $80 - $200.

Does shocking a well help with iron?

With shock chlorination, the entire system (from the water-bearing formation, through the well bore and the distribution system) is exposed to water that has a concentration of chlorine strong enough to kill iron and sulfate-reducing bacteria.

Can I shock my well myself?

You can shock chlorinate your own well or you can hire a licensed water well driller to do the procedure. If you notice a build-up of slime inside your toilet tank, staining of fixtures and laundry, bad taste and a rotten- egg smell, or if your well is producing less water, you may have a condition called biofouling.

Should you put bleach in your well?

Disinfecting Your Water

You can disinfect your well with household chlorine bleach such as Clorox, Purex or a generic brand. The chlorine in the bleach kills bacteria. Note that it may take more than one chlorination for your well to return a satisfactory test.

Should I put chlorine tablets in my well?

the well has been flooded or exposed to bacterial contamination in another manner, such as a crack in the well cap. Chlorine granules, tablets and liquid chlorine in the form of household bleach can all be used to disinfect your well.

Why does my well water turn brown when I add bleach?

The brown is the iron in the water that has oxidized as a result of the chlorination. Normally, the iron in water is in ion form and does not display itself until it combines with oxygen and forms common rust which turns the water reddish-brown.

What causes well water to suddenly turn brown?

A combination of iron, manganese, rust, silt, tannins, and the well itself can be the major contributor to sudden brown water in wells. You do not necessarily have to wait for a plumber when water discoloration occurs.

How do I get rid of brown water in my well?

How do I get rid of total coliform in my well water?

If there is a source of bacteria reaching your well, chlorinating the system will kill the bacteria in the well but the system will soon be contaminated again. A chlorine solution is the simplest and most effective agent for disinfecting a well, pump, storage tank or piping system.

How much bleach is needed to shock a well?

4) Work out how much bleach will be needed: For every 50 gallons of water in the well use one quart of laundry bleach - (4 quarts in a gallon). Do not use excessive amounts of bleach - more is not more effective. 5) For best results the bleach should be combined with water before adding it to the well.

What happens if I drink untreated well water?

Contaminated well water can cause nausea, diarrhea and vomiting and potentially lead to serious health problems, such as cancer, kidney disorders and brain damage, says Dr.

How long can you leave bleach in a well?

Mix the bleach with the well water.

Then place the hose in the hole where you poured the bleach, allow the water to run back into the well for 15-20 minutes.

What is a natural way to clean well water?

You can boil the well water for 5 minutes. With this, all the bacteria inside it will be eliminated. However, boiling will not be able to remove the solids and other materials inside the well water. The use of chlorine drops or iodine tablets can effectively kill the bacteria in the well water.

How common is coliform in well water?

Coliform bacteria are one of the most common water contamination problems in private water systems in Pennsylvania and throughout the United States. A 2006 survey of 450 private wells found coliform bacteria in approximately 35 percent and E. coli bacteria in about 15 percent of private wells.

Is it OK to have coliform in well water?

Most coliform bacteria are not harmful. However, some can make you sick. A person that has been exposed to these bacteria may have an upset stomach, vomiting, fever, or diarrhea. Children and the elderly are more at risk from these bacteria.

How many chlorine tablets should I put in my well?

Drop the proper number of pool chlorine tablets into the well. For a 10-foot well use 2 tsp. of a chlorine tablet, for a 20-foot well use 1 1/2 tbsp. of a chlorine tablet, for a 40-foot well use 3 tbsp.