How much R-value does stucco have?

Stucco, at roughly an inch thick, offers an R-value of about . 20. However, EIFS, depending on the thickness of the insulation board, can offer an R-value between 4 and 5.6.

Is stucco a good insulator?

Advantages of Stucco Siding

Because of the application and the material, stucco is an incredible insulator of both warm and cool air. With stucco on the exterior, it is cheap and easy to maintain a constant temperature in your home, no matter what the mercury reads outdoors.

Does stucco have R-value?

Stucco has an R-value that is the same as cement mortar and brick. Drywall and wood will give you the most insulative value for inside walls, but stucco could be applied over the top of these other materials.

How much insulation does stucco have?

Traditional stucco has a R-value of about 0.20 per inch. This means that stucco provides 20 percent of the insulation value of one inch of wood. Since the typical layer of stucco is usually less then an inch you can see that additional thermal barriers are needed to provide effective insulation.

Are stucco homes insulated?

Finally, stucco hasn't got an appreciable insulation factor: A 1-inch layer of stucco has a 0.20 R-value, which means it only has 20 percent of the insulation factor found in the same thickness of wood—none too desirable in a cold New England winter!

How I Gained R-10 Insulation Value with EIFS Stucco

What is better EIFS or stucco?

The fiberglass layer provides more durability, even against hard blows from weather. EIFS is notably lighter than traditional stucco, however. It is 80-percent less heavy than stucco, but it has a higher R-value, coming in between 4 and 5.6, which is notably higher than the 0.20 R-value of regular stucco.

Are stucco homes energy efficient?

Stucco is also very energy efficient and is very good at insulating your home. It keeps the interior of your home at a more consistent temperature than other types of siding, and it is resistant to extreme temperature changes.

Are stucco homes more energy efficient?

Stucco is generally cheaper to buy, and since it is more energy efficient, it can also potentially save you money on your heating and cooling bills, when compared with buying vinyl siding. Vinyl might be a little more durable and less susceptible to damage, but stucco is more energy efficient.

Do you need insulation with stucco?

Stucco homes have a reputation for water problems, often leading to rotting of the frame or mold growth behind the stucco surface. More modern stucco installation addresses these concerns, including using the right insulation. By adding proper insulation, you can eliminate many of these problems.

What is a good R-value for exterior walls?

Typical recommendations for exterior walls are R-13 to R-23, while R-30, R-38 and R-49 are common for ceilings and attic spaces. See the Department of Energy's (DOE) ranges for recommended levels of insulation below.

Is stucco good in cold weather?

The good news is that stucco is quite weather resistant, which means it can be a great choice no matter what type of climate you're in. Stucco can actually be quite beneficial for homes that see a lot of cold weather throughout the winter.

What are the disadvantages of stucco siding?

Con: Stucco Requires Some Maintenance

For instance, cracks may appear over time due to improper installation, and although they seem like cosmetic issues, cracks—especially large ones—can do more harm than you think. They can go deep beyond the surface and contribute to lasting structural damage.

What is the main problem with stucco?

There are several stucco problems that you can encounter. The most common ones are staining and discoloration, stucco cracking, and moisture intrusion. Other problems include stucco extending below grade and caulking. Some of these issues will need either repair or remediation.

Why are houses in the West made of stucco?

In the West and Southwest, where brick and stone were too scarce and too pricey to use as building materials, stucco became the siding of choice. Hundreds of thousands of affordable homes were slathered with the stuff.

What are the advantages of stucco?

What is the most energy efficient house siding?

Vinyl siding is thermally resistant, making it highly energy-efficient, especially when paired with foamed siding. It's cost-effective, as the material is less expensive and can be easily retrofitted. Vinyl is available in many styles and colors.

How long does traditional stucco last?

Stucco is a very durable finish material with a typical life span of 50-80 years or more. Although it is one of the most durable surfaces available, it also features the lowest annual maintenance cost when compared to other siding materials. Stucco is a natural material consisting of an aggregate, a binder, and water.

Is stucco considered siding?

There are many types of house siding, including fiber-cement panels, vinyl siding and custom home sidings. But another form of siding, used on houses for centuries, is called stucco.

What is better siding or stucco?

If you want durability, value, and style options, then siding is the best option for you. But, if you are not as concerned with budget and prefer a more natural seamless design look, go for stucco.

Which is better brick or stucco?

Brick has a higher resale value than stucco of up to 6%. The attraction of low maintenance, high fire resistance, and durability gives brick an edge over stucco for home buyers.

Is stucco cheaper than vinyl siding?

Right off the bat, you'll notice that stucco siding is a much more expensive option than vinyl siding. Stucco costs about $6-$9/square foot which is the most expensive home cladding option available. While vinyl siding prices range greatly, even the most expensive option doesn't cost nearly that much money.

What is the R-value of EIFS?

EIFS is an adhesively attached insulating cladding system. There are no fastening penetrations to the insulating component of these systems, the expanded Polystyrene Foam. This foam has an R value of approximately 4-per-inch of thickness at a 1-pound density.

When did builders stop using EIFS?

EIFS has been in use since the 1960s in North America, first on masonry buildings, but since the 1990s the majority on wood-framed buildings.