How much horsepower is required to turn an alternator?

An alternator takes about 1 HP for every 25 Amps of power. At full output, a 100 Amp alternator will need about 4 HP. For a long time, most alternators don't operate at full output.

How much power does it take to turn a car alternator?

Conventional alternator may only produce power for about 500 Watt to 600 Watt. But nowadays, a single alternator can produce power up to 2500 Watt, depending on the power demand.

How fast can you spin an alternator?

Normally, alternators have their full output rated at 6000rpm but can still spin up to 12,000rpm without any additional increase in output.

Can you turn a car alternator by hand?

If you're talking about a standard automotive alternator that is unplugged and doesn't have a belt to connect it to the rest of the engine, then you're free. After being spun by hand, freely enough, to continue spinning.

Does alternator increase horsepower?

“On some applications, a high-amp alternator can actually add horsepower to your engine's performance.” Sure, it's nominal, but, when it comes to horsepower, every bit helps. “Most alternators are only about 75 percent efficient.”

12V 64A Car Alternator Minimum RPM Test for 12V DC Output

How big of an alternator do I need for 3000 watts?

3000 watt / 12V is equal to 250A. A 250A alternator is needed to keep up with it. Since your engine would have to work just as hard as any portable 3KW generator to keep up with the amplifier, you would need a large fuel tank.

How big of an alternator do I need for 2000 watts?

For example, if you installed a 2,000-watt amp, assuming a nominal voltage of 13.5V, you'd add roughly 150 amps of demand to the electrical system.

How fast does an alternator need to spin to charge a battery?

Most alternators need to spin at about 2,400 rpm at idle, have their maximum output above 6,000 rpm, and should never exceed 18,000 rpm.

Can you use a car alternator to make a wind turbine?

When one uses a Delco car alternator as a wind generator, it is absolutely necessary to modify the alternator to operate at low RPMs. This is accomplished with two intricate modifications: One replaces the stock Delco car alternator stator windings with a stator that has more turns of smaller gauge wire.

How much horsepower does it take to run a 100 amp alternator?

An alternator takes about 1 HP for every 25 Amps of power. At full output, a 100 Amp alternator will need about 4 HP.

Does an alternator charge at idle?

Assuming the alternator, engine, belt, and battery are all in working order, then yes, a car battery will charge when idling. The only caveat is that it doesn't really “charge” that fast. This is solely due to the fact that the engine doesn't have a load on it when your car is simply idling.

How much torque does it take to turn an alternator?

If your alternator demand is for example, 2kW, then you need 2.7 HP from the motor to drive it. The details of RPM and torque vs. power you'd have to get from the alternator supplier. Typical alternators were 50-70A at 12V, or about 720W (roughly 1HP.)

How many Volt does a car alternator produce?

A good alternator puts out about 13.5 to 15 volts of electricity. If you're checking the voltage of your car's alternator, it should be at a minimum of 13.

What can I do with an old alternator?

Starters and alternators are part of the power supply chain in your car. They are both a great resource for scrap copper and steel, so salvage yards and other places will pay a decent price for them.

Does revving engine charge battery faster?

The battery will charge faster if you rev the engine faster. Why? Because the faster the crankshaft turns, the faster it turns the belt that runs the alternator. And the faster the alternator turns, the more electricity it produces to run all the electrical stuff in the car — and recharge the battery.

Will a capacitor help my alternator?

If you have a lacking electrical system and you add a capacitor then you add more load to the alternator. Now the alternator has to charge the battery, supply the amplifiers AND recharge the capacitor.

Is a 160 amp alternator good?

The 160 amp is known to be used on emergency vehicles that are at a standstill and still running lots of 12v power thru said appliances.

How many watts can a 80 amp alternator handle?

it depends on what size your alternator is. considering its a small car probably around 80amps. thats good enough for around 500 watts rms.

How big of an inverter can my alternator handle?

The DC battery and alternator must supply the DC AMPS. The average size alternator used in a vehicles' DC charging system is about 100 AMPS DC. This can power an inverter that will deliver about 1,200 watts @ 120 VAC.

What size alternator do I need for 1000 watt amp?

If you've read this far and are starting to rethink 150's, hair tricks, and broken windshields, you can still enjoy considerable bass with a single high output alternator in your car or truck. As a general rule, you need about 100 amps of current for every 1000 watts of power generated.

Do I need a bigger alternator for two batteries?

A car alternator will be more than capable of charging two batteries. However you need to be more careful about connecting two batteries together if one is charged and the other is not.

How many amps is a car alternator?

Alternator ratings range from about 60 or 70 amps up to 150 amps or more on many late-model vehicles. Some high-output alternators can generate upward of 200 amps. The amp rating of the alternator is matched to the vehicle's electrical system.