How much horsepower can a 4l60 take?

Their Stage 2 Pro Race transmission can handle gobs of power while their Invincible Black Edition 4L60E trans can support over 1,000 ponies.

Can a 4L60 handle 500 hp?

We found a used 4L60E out of a small-block Chevy-powered 1999 van for $200 and decided on a budget upgrade to handle roughly 500 hp. This decision was shaped by the knowledge there are lots of performance upgrade parts from Sonnax and TCI Automotive.

Can a 4L60 handle 1000HP?

supports up to +1000HP. Our BLACK EDITION Series is our ultra-extreme offering in our street/strip performance transmissions. It's rated at +1000 RWHP...

How much torque can a 4L60 handle?

Stock GM 4L60E is rated at 350ft/lb of torque. If you are going to spend $2000 - give RPM Transmissions in Indiana a call.

How strong is a 4L60 transmission?

The 4L60E is rated to handle up to 360 ft⋅lb (490 N⋅m) of torque. It weighs 133 pounds without transmission fluid.

How far will a 4L60E go without billet upgrades let’s find out.

How can I make my 4L60 stronger?

What transmission can handle 1000 HP?

The PerformaBuilt Hydramatic 400 Racing Transmission is a mega-performance transmission capable of +1000 RWHP.

Which is better 4L60E or 4L80E?

The Bottom Line. The 4L60E vs 4L80E performance transmission differences are numerous. And these differences show that the 4L80E is the better transmission of the duo. However, it'll cost you more to acquire this unit compared to the 4L60E and the latter is also easier to find.

What is the difference between 4L60 and 4L60E?

Also, both 4L60 and 4L60E feature gears positioned or placed longitudinally (in a north-south direction). However, the 4L60E can handle a GVWR of 8,600 lb, which is more than 4L60's. Nevertheless, the suffix 'E' denotes the most distinguishing feature of 4L60E, which differentiates it from 4L60.

Which is better 4L60E or 700R4?

700R4: The Good And The Bad. Shifting over to the 4L60E side, the main advantage of this transmission is that electronics eliminate the need for a TV cable and that whirling dervish of weights and springs to establish shift control.

How much HP can a 4L80E handle?

In short, Performance Automatic yields a 4L80E engineered to handle 700+ horsepower and comparable torque.

What transmission can handle 600hp?

Performance Automatic introduces it's 765R4 transmission, a 700R4 unit built to the max! When you need a non-computer controlled overdrive able to take an easy 600 horsepower, this is the one.

What does a shift kit do for a 4L60E?

In short, an automatic transmission shift kit modifies the transmission's shift timing in order to dramatically increase shift firmness and durability of the transmission components.

What should I upgrade on my 4L60E?

How can I make my transmission stronger?

There are 6 ways to improve automatic transmission performance and reliability. These are servicing the transmission, changing driving habits, driving with lower gears when loaded, maintaining engine performance, having proper alignment of tires, and having the correct tire size.

What does a Corvette servo do in a 4L60E?

The corvette servo will give your transmission 50% more apply pressure, which is just what you need to keep from burning your transmission up under heavy load situations.

Does a 4L60 need a computer?

Externally, all it needs is a 12-volt source and an engine-vacuum reference. However, if your trans is, in fact, a 4L60E, running it off a computer is mandatory. On "E" transmissions, the computer controls everything: TCC lockup, gear changes, shift quality and firmness, and line pressure.

Does 4L60 have kickdown cable?

I mean that the 4L60E tranny is computer controlled, it doesn't use a cable, but is tied into a powertrain control module that is integrated into the engine electronics. They may a stand-alone box if you want to run a carb.

How many gears does a 4L60 have?

The 4L60E is an automatic transmission with electronic control (E), 4 forward gears (and 1 reverse), longitudinal rear-wheel drive, and a 6,000 lbs.

What does 4L60E stand for?

In 1990, the 700-R4 was redesignated the 4L60, with "4" meaning four-speed, "L" for longitudinal installation (north/south), and "60" meaning light-to-medium-duty use and 6,000-pounds gross vehicle weight.

What is the strongest GM transmission?

The 10L90E is by far the biggest and heaviest modern automatic transmission in GM history, but it's also the strongest and offers amazing performance and economy when matched with a Gen V LT engine. This is part of the newest technology in the performance world.

Can a 700R4 handle 1000hp?

The newest version of the 700R4 Super StreetFigher™ (Part #371200) includes all of the features of the original, as well as the ability to handle 1000 horsepower. It is updated with a new 300M input shaft that allows for much greater torque capacity.

How much HP can a 700R4 take?

The TCI Super StreetFighter GM 700R4 Transmission is designed for higher horsepower and higher torque street/strip applications. Features: Capable of handling 1000+ HP. 300M input shaft allows for higher torque capacity.