How much does it cost to tile a 12x12 room in India?

Construction cost for one room 12'×12′ with parapet wall is around rs 140225, this total cost includes soil excavation cost rs 2900, brickwork cost rs 55280, concrete cost rs 22600, steel cost rs 26640 and labour cost rs 32805 without plastering PCC and tile flooring.

How much tile do I need for a 12x12 room?

Since a 12 by 12 ceramic tile is one square foot, the number of square feet equals the number of tiles you need to cover the floor space. However, you should allow for cutting tiles to fit or breakage, so add 20 percent to your measurement.

How much does it cost to install a 12x12 tile?

Labor to install a tile floor costs between $4 and $14 per square foot and $25 to $32 per square foot for backsplashes and countertops.

How much does it cost to install tile per square foot in India?

The labour cost for laying the floor tiles on a new floor or an existing flooring in a simple straight line design ranges between ₹35 and ₹40 per square foot.

How many 12x12 tiles do I need for 60 square feet?

How many 12×12 tiles do i need for 60 square feet :– for a 60 square foot tile project, you will need to install a total of 60 12×12 tiles. Extra tiles needed 15% of total such as 15℅ of 60 = 9, add this 60 +9 = 69. Thus, approximately 69 nos or 6 box of 12×12 tiles you needed to cover 60 square feet.

Floor Tile Cost | Floor Tile Cost With Material and Labour

What's the labor cost to install tile?

Professional installation adds $5 to $10 per square foot, depending on the amount of prep work required, putting the total average cost to install a tile floor at $7 to $14 per square foot. Expect to pay $1,050 to $2,100 to install a tile floor in a 10x15-foot room (150 square feet).

What is the cost of Kajaria tiles per square feet?

The price of Kajaria Vitrified Tiles products is between ₹50 - ₹78 per sq ft during Jun '21 - May '22.

Which tiles are cheapest?

How many sq ft is 12x12?

The square footage of a room 12 feet wide by 12 feet long is 144 square feet.

How do I calculate room tiles?

Multiply the tile length by the width to figure the area that one tile will cover in square inches. Divide the result by 144 to convert it to square feet. Then, divide the area you're tiling by the square footage of one tile to determine how many tiles you need.

What is the cost of tiles per square foot?

Tile flooring costs range between $7 and $24 per square foot with most homeowners spending $10 to $15 per square foot. The lowest cost floors are ceramic at an average cost of $10 per square foot, while marble floors will be $20 per square foot or more.

How much does it cost to install tile per square foot?

Wall Tile: Average $1,000 - $1,500

Setting Materials: $1.37/SQ. FT. Installation: $8.00/SQ. FT.

How much tile can you lay in a day?

Professional tilers and contractors can lay around 100 12×12 inch (30.5×30.5 cm) tiles in an hour or 900 tiles in a single 9-hour day.

How much does a tile installer make per hour?

Most common benefits. The average salary for a tile setter is $24.09 per hour in the United States and $5,563 overtime per year. 867 salaries reported, updated at June 23, 2022.

How much does ceramic tile cost?

As a rule of thumb, quality ceramic and porcelain floor and wall tiles will be in the $3.99 to $9.99 square foot range. Natural stone will be higher in the $9.99 to $19.99 square foot range.

How much does it cost to tile a bathroom floor?

$1000 – $2,200. The average cost to tile a bathroom floor is about $17 per square foot. Cheap tile installed starts at about $10 per square foot while premium tile costs as much as $22 per square foot installed. Prices include the tile, materials and labor.

How do I calculate bathroom tiles?

Measure every side in inches and mark the drawing or photo. If needed, break the spaces into sections, labeling each with a capital letter from A-Z to keep them from getting confused. Multiply the height and width of each section. Add together all the sections and divide that number by 144 for the square footage.

How many boxes of tiles do I need for a room?

Divide the total square footage of the room by the total square footage of the tile in the box. In our example, let's say each box contains 10 square feet of tile. So if you need 120 square feet, 10 goes into 120 12 times, so you'll need to buy at least 12 boxes.

How many 4x4 tiles make a square foot?

If that is (as I suspect) 4" x 4", you need 9 for each square foot, thus 90 overall - if they fit the region you wish to tile perfectly.

How long does it take to tile a 10x10 room?

According to experts, it takes a beginner about 16 hours to lay ceramic or stone tiles in an average room. A person with intermediate skills takes about 12 hours and experts, such as our Lewisville professionals at Pro Flooring, take about 10.