How much does it cost to stain a 12x12 deck?

A 12x12 deck costs $226 to $582 to stain when paying someone, or $59 to $176 to stain it yourself. A gallon of stain costs $20 to $50, which covers 200 to 300 square feet. Get free estimates from deck staining companies near you or view our deck stain cost calculator below.

How much should I charge to stain a deck?

The cost to stain your deck typically ranges from $540 to $1,050 with an average of just over $700. This equates to an average cost of $2 to $4 per square foot for labor and materials. Higher-quality stains will run up the price, as will washing or sealing the wood prior to staining.

How much stain do I need for a 12x12 deck?

How Much Stain Do I Need For My Deck? For decks and patios that measure up to 175 square feet, you will only need one gallon of stain, in any transparency. If your deck or patio measures up to 550 square feet, you will need to buy 2 gallons of stain.

How much does it cost to stain a 10x10 deck?

Wood decks require regular maintenance, and homeowners should consider staining their decks every two to three years for best results—an average deck staining job costs around $850, with most jobs ranging between $550 to $1,250.

How much does it cost to paint a 12x12 deck?

The cost to paint a deck ranges from $600 to $1,500 or about $2 to $5 per square foot.

How To: Deck Stain Price

Is it cheaper to paint or stain a deck?

Stain is more budget-friendly.

Stain runs between $20 and $35 per gallon, while exterior paint suitable for decking ranges from $30 to as much as $60 per gallon. Plus, if painting, you'll have to factor in an extra $15 to $40 per gallon of wood preservative and $15 to $30 per gallon of primer.

How many coats of stain should you put on a deck?

We always recommend two coats of stain for any wood project, but you should only apply as much stain as the wood can absorb. Extremely dense hardwoods may only be able to absorb one coat of wood stain. The general rule of thumb is to apply only as much as the wood can absorb.

How long does staining a deck take?

Staining a deck doesn't take as long as you may think. The typical deck can be stained in a matter of a couple hours, given the right circumstances. Learn about the conditions needed to make sure your project is completed as quickly as possible, the best products to use, and how to prepare and stain your deck.

Should I power wash my deck before staining?

There is a common misconception that just pressure washing a deck prior to staining is all you need to do in order to prep your deck for stain. Pressure washing can help, but if you want your stain to last, using a good deck cleaner and brightener on the deck prior to pressure washing will provide you the best result.

How much does a 5 gallon bucket of stain cover?

With 5 gallons of deck stain, you can cover around 875 ft² of deck area.

Can you use a roller to apply stain to a deck?

Use the proper roller nap for best results, but remember that rollers are not really designed to hold deck stain. A wide 18-inch roller may work well for staining a few fence or deck boards, but a mop or stain pad will hold more stain, lessening the amount of time you have to dip back into the stain bucket.

What is the best time of year to stain a deck?

The best time to stain your deck is either the spring or the fall. If you stain your deck in the summer, make sure you do it out of the direct sunlight. Applying a deck stain in direct sun will cause the stain to dry to quickly and can result in premature stain failure.

How much do you charge for staining?

According to HomeAdvisor, stain prices can range from $20 to $120 per gallon. For a deep-penetrating stain, the average cost is at least $30 to $40 per gallon.

What if it rains after I stain my deck?

If it rains within 48 hours of applying a treatment, the water will soak into the wood, and try and displace the stain. This can cause a blotchy, flaky look, rather than a smooth, even, coat. If it rains immediately after you've stained the wood, the stain will peel and flake off.

What temperature is best to stain a deck?

Do you seal a deck after staining?

Most of the time, stains also contain a protective sealant. It's a good idea, though, to re-seal your deck (or check that it needs to be re-sealed) once a year. Water-based stains can adhere to water or oil-based coatings already present on the wooden surface. Water-based stains can be cleaned up with water.

How long do I need to wait after washing my deck to stain it?

Should I use a brush or roller to stain my deck?

Deck stains can be applied in several different ways. Using a pump-up garden sprayer and roller are two popular methods. Regardless of how you apply your wood stain, keep a paint brush at hand. A paint brush will work the stain deep in to the pores of a board.

Should I sand deck before staining?

Sand the Deck

If you plan to stain the deck, sand the surface before application to make the wood better absorb the coating. Use an orbital sander to remove any old gloss and smooth out any rough areas on decking boards.

What is the difference between deck stain and wood stain?

Deck stains incorporate preservatives and pesticides that indoor stains lack. They are often formulated to protect from UV damage, water damage and weathering. Indoor stains may also offer these protections, but to a lesser degree.

How long does deck stain last?

The best stains should last three to five years on a deck and even longer if applied to siding or fences, which don't get as much abuse.

Why You Should Never paint a deck?

To get the most out of a wood deck it needs to be protected from the environment and harsh weather conditions. Harmful UV rays and moisture can lessen the longevity of a wood deck in no time.