How much does it cost to shock the well?

How much does it cost to shock a well? If you hire a company to do it, it can cost anywhere around $100 depending on where you live. Doing it yourself will only cost as much as the chlorine, 10 gallon bucket and the safety supplies to do it.

How often should you shock your well water?

Homeowners with private wells should have their well water tested every 3 to 5 years for some contaminants, including bacteria.

Is it good to shock your well?

Shock chlorination is a method of disinfecting a water well. It is recommended when a water system is contaminated with bacteria. Contamination can occur when the well is installed, when repairs are made to the pump or plumbing, or when rainfall runoff enters the well.

How long does it take to shock a well?

It will usually take 4 to 8 hours to flush the well after a standard well chlorination. The water may become discolored during flushing because the chlorine may have loosened the hard water deposits in the plumbing.

Should you shock a well every year?

Shock chlorination is recommended: upon completion of a new well or when an unused well is returned to service. if annual water test results indicate the presence of bacteria. if a well system is opened for any installation, repair or maintenance.

How to Disinfect Your Well

How long after shocking well can you shower?

Do not shower for at least 24 hours after shocking your well. Waiting for one or two days more, if possible, is much better. Chlorine levels in the well water will go down only after freshwater dilutes and replaces chlorinated water. This process can take 1-2 days.

Does shocking a well get rid of coliform?

When done properly, shock chlorination will kill all the bacteria existing in a well. A recent Penn State study of wells contaminated by coliform bacteria found that shock chlorination and installation of a sanitary well cap successfully removed the bacteria for one year in 15 percent of the wells.

How do you shock a residential well?

Use ordinary liquid laundry bleach to shock chlorinate the water system. Determine how much bleach to use, then pour the bleach down the well and circulate it through the whole water distribution system. Wait 6-12 hours for the chlorine to work, then flush the chlorinated water from your well and pipes.

How much does it cost to chlorinate a well?

To disinfect your well and eliminate the bacteria, you should chlorinate the well. You can hire a company that services wells to do the chlorinating. The cost ranges from $80 - $200.

Can I pour bleach in my well?

Disinfection Procedure. Mix 2 quarts bleach in 10 gallons of water; pour into well. Connect a garden hose to a nearby faucet and wash down the inside of the well. Open each faucet and let the water run until a strong chlorine odor is detected, then turn it off and go to the next one.

What is a natural way to clean well water?

You can boil the well water for 5 minutes. With this, all the bacteria inside it will be eliminated. However, boiling will not be able to remove the solids and other materials inside the well water. The use of chlorine drops or iodine tablets can effectively kill the bacteria in the well water.

How do I know how much water is in my well?

First, subtract the depth to water from the overall depth of the well. For example, if our well was ten feet deep and it was a foot to water, we'd have nine feet of water. Next, use the following equation: pi (or 3.15 if you're not using a calculator) times the square of your radius times the height of your well.

Does shocking a well help with iron?

With shock chlorination, the entire system (from the water-bearing formation, through the well bore and the distribution system) is exposed to water that has a concentration of chlorine strong enough to kill iron and sulfate-reducing bacteria.

How often should a well be cleaned?

9. As a routine maintenance practice, clean your well at least once a year. If you have an iron or sulfur bacteria problem, clean more often.

Why does my well water turn brown when I add bleach?

The brown is the iron in the water that has oxidized as a result of the chlorination. Normally, the iron in water is in ion form and does not display itself until it combines with oxygen and forms common rust which turns the water reddish-brown.

What happens if I drink untreated well water?

Contaminated well water can cause nausea, diarrhea and vomiting and potentially lead to serious health problems, such as cancer, kidney disorders and brain damage, says Dr.

How long does it take to chlorinate a well?

A very shallow well can flush in as little as 30 minutes, while deep wells can take up to 24 hours. During shock chlorination, the chlorine will also pass through a home's entire plumbing system.

How much bleach does it take to shock a well?

Dug well (1 meter/3 foot diameter)

Add 1 litre (1 quart) of household bleach for every 1.5 metres (5 feet) of depth of water. If you don't know how high the water stands, use the well casing depth to estimate how much household bleach to use.

How many chlorine tablets should I put in my well?

Drop the proper number of pool chlorine tablets into the well. For a 10-foot well use 2 tsp. of a chlorine tablet, for a 20-foot well use 1 1/2 tbsp. of a chlorine tablet, for a 40-foot well use 3 tbsp.

How common is coliform in well water?

Coliform bacteria are one of the most common water contamination problems in private water systems in Pennsylvania and throughout the United States. A 2006 survey of 450 private wells found coliform bacteria in approximately 35 percent and E. coli bacteria in about 15 percent of private wells.

What happens if you put too much bleach in well?

According to AskingLot, if you put too much bleach in your well, it can destroy the good bacteria found in the well, which can be a significant problem! The company also says that you should dilute the bleach with water so the pipes do not get ruined.

Is it OK to have coliform in well water?

Most coliform bacteria are not harmful. However, some can make you sick. A person that has been exposed to these bacteria may have an upset stomach, vomiting, fever, or diarrhea. Children and the elderly are more at risk from these bacteria.

What does it mean when your well water turns brown?

If your area has received more rainfall than usual, brown well water can result from rusty plumbing, rainwater runoff contamination, or septic cross-contamination.

What causes diarrhea in well water?

While most coliform bacteria do not cause disease, their presence suggests there may be disease-causing microorganisms in your water. These microorganisms can cause diarrheas, dysenteries, salmonellosis, hepatitis, and giardiasis.