How much does it cost to sand and repaint a deck?

On average, the cost to refinish a deck is between $3 and $6.80 per square foot. Since a standard deck measures about 200 square feet, a refinishing project will cost about $600 to $1,360 or $975 on average.

How much does it cost to have someone sand your deck?

The average deck refinishing cost is about $3 to $6.80 per square foot. Your standard 200-square-foot deck will cost $600 to $1,360 or an average of $975. Get quotes from up to 3 pros!

How much should I pay to have my deck painted?

The cost to paint a deck ranges from $600 to $1,500 or about $2 to $5 per square foot. Painting a 300 square foot surface is $1,050 on average, but many factors can increase the price. The labor rate, material condition, and paint quality, for example, can all drive up the total.

Do you have to sand a deck to repaint it?

Using the best deck paint, it must say on it's label, Deck & Fence Paint or Stain, as these paints are designed for horizontal surfaces. No need to remove all deck paint without stripping, but scuff sanding is recommended before repainting, allowing new paint to grab and hold even better. So there you have it!

Can you sand old paint off deck?

You can sand off the paint and the top layer of wood to reveal fresh-looking decking. After sanding the old paint away, you can repaint or seal the deck boards for a new look.

HOW TO SAVE THE LIFE OF YOUR DECK

Should I pressure wash my deck before painting?

If you decide not to power wash beforehand, not only will your new paint not stay for very long, but your old paint will still be underneath. Pressure washing will not only remove the dirt and grime, but it can also remove old, chipped paint that may cause discrepancies in you new paint job.

Is it cheaper to paint or stain a deck?

Stain is more budget-friendly.

Stain runs between $20 and $35 per gallon, while exterior paint suitable for decking ranges from $30 to as much as $60 per gallon. Plus, if painting, you'll have to factor in an extra $15 to $40 per gallon of wood preservative and $15 to $30 per gallon of primer.

How much does it cost to scrape and stain a deck?

Average Cost to Stain a Deck

The cost to stain your deck typically ranges from $540 to $1,050 with an average of just over $700. This equates to an average cost of $2 to $4 per square foot for labor and materials.

How much does it cost to stain a 12x12 deck?

Deck staining costs vary upon several factors, including the size of the deck, its condition, and any useful add-ons like sealing, power washing, and waterproofing. An average-sized wood deck of around 250 square feet costs between $400 to $600, though add-ons bring this price up to about $800.

How much should I sand my deck before staining?

Many homeowners recognize this but wonder how to sand a deck for the best results. To open the wood grain so it absorbs stain or paint, sand the deck using 20 to 50 grit sandpaper on the first pass and 60 to 80 grit on the second pass on a belt sander or orbital floor sander.

How much does it cost to stain a 10 x10 deck?

A 10'x10' deck covers 100 square feet, with a typical staining cost of $300. A 12'x12' deck covers 144 square feet, costing an average of $432. 8'x10' works out at 80 square feet, with a final cost of $240. A deck measuring 10'x20' covers 200 square feet for a typical cost of $600.

How long does it take to strip a deck?

Here's a quick overview the 6 steps to stripping the finish off your old deck, porch, stairs, or railings. Depending on the size of your deck, it can easily be completed in a day or maybe a weekend.

Why You Should Never paint a deck?

To get the most out of a wood deck it needs to be protected from the environment and harsh weather conditions. Harmful UV rays and moisture can lessen the longevity of a wood deck in no time.

Do I need to sand my old deck before staining?

If you plan to stain the deck, sand the surface before application to make the wood better absorb the coating. Use an orbital sander to remove any old gloss and smooth out any rough areas on decking boards.

What lasts longer deck stain or paint?

Better, Lasting Coverage

While staining may take less time than painting, painting often does a better job of filling the cracks, covering imperfections, and provides longer lasting protection. Paint also is typically more rot resistance and does a better job of preventing mold and sun damage.

How long after power washing can you paint a deck?

Done frequently, this procedure will allow the homeowner to avoid power washing. The deck must be dried for at least twenty-four hours before painting or staining; forty-eight hours is ideal. Do not paint or stain a deck if there is high humidity or the temperature is above seventy-nine degrees.

How long after power washing can you paint?

After pressure washing your house, you have to wait for it to fully dry before you can paint it. This waiting time can be anywhere from 24 hours to 3 days. Pressure washing isn't for beginners. If you're not experienced, the high water pressure can easily damage portions of your house's exterior.

How long after power washing can you seal a deck?

Sand Your Deck Before Sealing

After you've pressure washed your deck, you'll need to wait for it to completely dry. Sometimes, this can take as long as 48-hours. Once it's dry, you'll want to sand your deck lightly. This is necessary to remove any splinters or fuzzy patches that pressure washing can cause.

How long does it take to sand a deck?

Let me explain: In general, it will take you 8 hours to sand a deck that is 25m2, using a belt sander. But there are a few factors that can affect the time it takes to sand your decking.

What if it rains after sanding deck?

It shouldn't make too much of a difference that it rained after you sanded it down as long as it still has pores to absorb the stain. I always recommend placing a large tarp over the area so that if it does rain, you don't have to worry too much about your work.

Should I wash deck after sanding?

After sanding, power-wash the deck and allow it to dry for at least 24 hours before staining. Sanding exposes porous wood that's ready to soak up the stain, but this isn't possible if the wood is full of water.