How much does it cost to replace Masonite siding with hardiplank?

Average cost: $1,500 - $9,000

Hardie board siding costs anywhere from $1 to $6 per square foot of material installed on a home. If you were to replace siding on an average size home of 1,500 square feet, you could expect to pay anywhere from $1,500 to $9,000 in total installation and replacement costs.

Should Masonite siding be replaced?

While Masonite siding is no longer produced, fiber-cement siding makes an excellent substitute. There is no need to replace all the siding at once, unless the damage is widespread. Remove only the damaged boards and replace them with fiber-cement boards as needed.

How much does it cost to replace Masonite?

Masonite Siding Average Costs #

Hardboard siding costs $2.50 to $5 per square foot installed. For an average-sized home with 1,500 exterior square feet, the total cost might be $3,750 to $7,500. Materials to replace a 12 foot by 1 foot section of Masonite costs $10 to $20.

What is a good replacement for Masonite siding?

Fiber cement siding is the best material for replacing your masonite siding with. Fiber cement is made with a blend of cellulose fiber, Portland cement, sand, and silica. It's formed to look like real wood, with a natural-looking grain and texture. But, it's non-porous and resistant to moisture and insect activity.

Why was Masonite siding discontinued?

It was "supposed" to be lower maintenance than its counterparts and last longer; however, time showed that this product was not living up to its hype. After about 20 years and class-action lawsuits, it is no longer manufactured. So, now that Hardboard siding is discontinued, what do you do?

4 Steps for Replacing Masonite Siding with James Hardie Siding

Is Masonite the same as hardiplank?

The Cost Differences Between James Hardie Fiber Cement and Masonite Siding. Clearly, masonite siding is going to be more affordable. Masonite siding is essentially like particle board, which is very cheap to make. It does not require a whole lot of materials, or a whole lot of work to make it.

How do you repair damaged Masonite siding?

What can I replace hardboard siding with?

HardiePlank siding is an excellent replacement option. Unlike hardboard, HardiePlank is a fiber cement siding, so it won't become damaged by the weather like the hardboard siding does. It's extremely durable, holds up to weather and people, and isn't going to swell, rot, crack, or otherwise fall apart.

Can I put vinyl siding over Masonite?

That's an important first step as vinyl siding should never be installed over the Masonite. Some vinyl siding replacement companies will simply attach the new vinyl to the old Masonite siding, which can cause issues in the future. It's actually extremely critical to remove the old Masonite from the exterior.

When was Masonite siding used?

In the 1930s and 1940s, Masonite was used for applications including doors, roofing, walls, desktops, and canoes. It was sometimes used for house siding. Similar "tempered hardboard" is now a generic product made by many forest product companies.

When did builders stop using Masonite siding?

As a result of the lawsuit, nearly all manufacturers stopped producing Masonite siding and, in March 2001, the Masonite Corporation announced its decision to phase out production of all hardboard siding products.

Is Masonite siding any good?

It's made of wood fibers that are held together with glue or resin through a heat and compression process. Its advantages made it a siding product people flocked to for its initial strength and low cost. Masonite siding is even more budget-friendly than vinyl siding, making it a popular choice to many.

Can you pressure wash Masonite siding?

A word of caution when house cleaning: if your home's exterior is Masonite or other hardboard siding, do not proceed with power washing. The intense pressure of the power washer can damage the siding; opt for the old stand-by garden hose and some household bleach to do the job.

Do termites eat Masonite siding?

Inspect the outside of home for moisture problemsAn area that commonly rots and acts as harborage for termites is masonite siding.

Can Masonite siding be painted?

Masonite is easily damaged, so use caution when scraping off layers of old paint and sanding the surface. Also, Masonite siding will need a coat of primer prior to painting. A primer that is appropriate for Masonite is necessary and the siding must completely dry before applying top-coats of paint.

Is Masonite better than vinyl?

It can cost 25 percent to 50 percent more than vinyl but is cheaper than wood. The main drawback is that, unlike vinyl, it requires more maintenance than vinyl and requires repainting or restaining every eight to 10 years because the color will fade.

What is the cost of Masonite siding?

Prices. According to Cost Owl, at the time of publication, Masonite siding costs about $1.50 to $3 a square foot. A home that needs 2,500 square feet of siding can cost from $3,750 to $7,500 in materials alone.

What does hardboard Masonite siding look like?

Masonite hardboard is made from wood chips steamed into board form. Hardboard siding is typically stained and textured to resemble wood, and from a distance, it looks just like wood siding. It's most often found in horizontal lap designs.

Can Masonite be used outside?

To avoid structural failure of a piece of installed Masonite, you need to waterproof the surface of the Masonite after installation. Lacquer-based waterproofing systems bond to the surface of the Masonite and provide adequate protection against moisture intrusion.

What kind of siding was used in the 70's?

4) Asbestos Siding

When used as a siding, asbestos fibers were mixed with Portland Cement and pressed together to form what we know as asbestos siding. This type of siding was manufactured up to the late 70's, until it was deemed to be a health risk.

Is Masonite and hardboard the same thing?

Masonite is a type of hardboard, also referred to as HDF or high-density fiberboard, a type of fiberboard. As opposed to MDF or medium-density fiberboard.

Is hardboard siding the same as hardiplank?

HardiePlank is a brand of lap siding made by the James Hardie company. It features a 30-year limited warranty and is the siding on more than 4 million homes in the United States. Hardboard is a type of wood product available from many companies. The name hardboard defines how it is made.