How much does it cost to put fascia in a house?

Written by HomeAdvisor. The average cost to replace or repair fascia boards and soffits sits at $10 per linear foot, or $2,500 for the total cost of 250 linear feet. At the low end of the spectrum, expect costs to be $6 per linear foot, or $1,500 for the total.

How much does it cost to put on fascia?

Fascia installation costs range from $6 to $20 per linear foot, while soffit installation tends to be cheaper than fascia at $1 to $3 per linear foot.

How much is fascia for a house?

Labor. The labor cost to install fascia is between $6 and $20 per linear foot. The average one-story home will need 300 linear feet of soffits, which would require between 11 and 13 active labor hours, costing $800 to $1,400 total. The labor cost to install soffits is between $1.50 and $3 per foot.

What is the average price for aluminum fascia installation?

The national average materials cost to install aluminum fascia is $2.17 per linear foot, with a range between $1.73 to $2.60. The total price for labor and materials per linear foot is $7.20, coming in between $4.93 to $9.48.

Is fascia board expensive?

"When the water backs up, the first place it wants to go is the fascia board." Replacing your soffit generally costs about $20 to $30 a linear foot installed, while replacing your fascia costs about $15 to $25 a linear foot installed.

Roofs, Gutters, Soffit,

How much does wood fascia cost?

Fascia Board Cost by Material

Wood is the most common choice for fascia board material, at $1 to $3 per linear foot. This is because it's easy to install, cost-effective, and aesthetically pleasing. Fiber cement is sold by the square foot, between $1 and $5.

When should fascia be replaced?

If you have noticed that little to no ventilation is making its way into your home, that could indicate that your soffits and fascia are blocked or damaged. If the latter is true, you need to consider replacing them right away.

How do you replace a rotted fascia board?

Is fascia board necessary?

The Best Fascia Tips You Will Read This Year. The short answer to this question is, “Yes!” They are undoubtedly necessary because they help cap the edges of the rafters, hold gutters in place to help ensure proper water drainage, and more.

What's the difference between soffit and fascia?

The soffit helps regulate your home's temperature, allowing your roof to “breathe.” Cool, dry air is drawn into the soffit vent, and hot moist air is forced out of roof exhaust vents. The fascia is the attractive board along the side of the overhang and the roof that helps your roof appear finished.

What is the cheapest fascia board?

The material of fascia boards

Wooden fascia board materials range from $1 to $3 per linear foot. Composite fascia boards fall between the price range of $1 and $8 per linear foot. Vinyl fascia boards range between $5 and $8 per linear foot. Aluminum fascia boards are between $8 and $20 per linear foot.

What is the best material for fascia boards?

Wood: Wood is perhaps the most common selection when it comes to designing a fascia board. Wood designs can bring a pleasing aesthetic value to the home, especially if your home has wooden siding. Typically for fascia boards, cedar and redwood are popular choices given their resistance to rot from excessive moisture.

What does house fascia look like?

fascia. Trim is the material used to encase windows and doors, among other features, on a home's exterior. Fascia is a horizontal or angled board that encloses the edge or face of the projecting eaves.

Do gutters attach to fascia?

Quality gutter installation usually makes use of fascia gutter brackets. These should be attached through fascia into rafter tails, rather than to just the fascia, for a secure and long-lasting installation.

Do I need soffit and fascia?

Sealing your roof

As well as offering good ventilation for your attic, your fascia and soffits act as that final seal between the inside of your home and the external elements. A well-installed fascia and soffit will help to protect the feet of your roof rafters from the external elements.

Do gutters cause fascia to rot?

Leaky Gutters

The most common reason why fascia boards rot is due to an ineffective gutter. A gutter system that's old and leaky or has an improperly aligned downspout will cause the excess moisture to back up into the fascia, which will result in rot over time.

What is behind fascia board?

Soffit. The soffit board is tucked away under the fascia board. It is usually the board that you see most of from street level. The soffit can be ventilated to allow the flow of air into the roof area.

Can you put fascia over existing wood?

While it is certainly feasible to install vinyl fascia and soffit over wood, you need to ensure that you are keeping in line with the local building codes. Make sure that your attic has enough ventilation before affixing your vinyl soffit over the plywood.

Do you need scaffolding to replace fascia?

Do I Need Scaffolding To Replace Fascias and Soffits? In some instances, scaffolding will be recommended – such as for a typical 3 bedroom semi-detached house on two floors, replacing soffits and fascia board will require the erection of scaffolding.

Do I Install fascia or soffit first?

The job goes smoother when you follow the correct installation sequence. First nail up the J-channel, then soffit panels, then fascia, then drip edge.