How much does it cost to have a well Shocked?

How much does it cost to shock a well? If you hire a company to do it, it can cost anywhere around $100 depending on where you live. Doing it yourself will only cost as much as the chlorine, 10 gallon bucket and the safety supplies to do it.

How often should a water well be shocked?

Homeowners with private wells should have their well water tested every 3 to 5 years for some contaminants, including bacteria. If these tests turn up positive for bacteria, chlorinating the well may be a way to resolve the problem.

Can you shock your own well?

Use ordinary liquid laundry bleach to shock chlorinate the water system. Determine how much bleach to use, then pour the bleach down the well and circulate it through the whole water distribution system. Wait 6-12 hours for the chlorine to work, then flush the chlorinated water from your well and pipes.

Is shocking a well Necessary?

Shock chlorination is a method of disinfecting a water well. It is recommended when a water system is contaminated with bacteria. Contamination can occur when the well is installed, when repairs are made to the pump or plumbing, or when rainfall runoff enters the well.

How long does it take to shock a well?

It will usually take 4 to 8 hours to flush the well after a standard well chlorination. The water may become discolored during flushing because the chlorine may have loosened the hard water deposits in the plumbing.

Shocking Well with Chlorine

How long do you have to run water after shocking well?

Run the water to flush the bleach solution out of the well. Monitor the process, it can take 30 minutes to 24 hours or more to flush all of the bleach solution from the well. Use chlorine test papers to verify that the water coming from the outside faucet or yard hydrant is clear of any bleach solution.

When can I shower after shocking well?

Do not shower for at least 24 hours after shocking your well. Waiting for one or two days more, if possible, is much better. Chlorine levels in the well water will go down only after freshwater dilutes and replaces chlorinated water. This process can take 1-2 days.

How often should a well be cleaned?

9. As a routine maintenance practice, clean your well at least once a year. If you have an iron or sulfur bacteria problem, clean more often.

Will Shocking well get rid of sulfur smell?

1. Shock your well with chlorine bleach or hydrogen peroxide to get temporary relief from sulfur odors. Often keeps odors away for 1 – 2 months.

Should I put bleach in my well?

You can disinfect your well with household chlorine bleach such as Clorox, Purex or a generic brand. The chlorine in the bleach kills bacteria. Note that it may take more than one chlorination for your well to return a satisfactory test.

How much bleach does it take to shock a well?

Mix 2 quarts bleach in 10 gallons of water; pour into well. Connect a garden hose to a nearby faucet and wash down the inside of the well. Open each faucet and let the water run until a strong chlorine odor is detected, then turn it off and go to the next one.

How many chlorine tablets should I put in my well?

Drop the proper number of pool chlorine tablets into the well. For a 10-foot well use 2 tsp. of a chlorine tablet, for a 20-foot well use 1 1/2 tbsp. of a chlorine tablet, for a 40-foot well use 3 tbsp.

Does shocking a well help with iron?

With shock chlorination, the entire system (from the water-bearing formation, through the well bore and the distribution system) is exposed to water that has a concentration of chlorine strong enough to kill iron and sulfate-reducing bacteria.

Should I put chlorine tablets in my well?

the well has been flooded or exposed to bacterial contamination in another manner, such as a crack in the well cap. Chlorine granules, tablets and liquid chlorine in the form of household bleach can all be used to disinfect your well.

What does shocking a well mean?

To shock chlorinate, you add a concentrated chlorine solution to the water in the well casing (material that supports the sides of the well). Some of this water will move outside the well and into the aquifer. Then you flush the chlorinated water through the system and let it sit for a certain amount of time.

How do you shock a dug well?

Pour the required amount of unscented bleach into the well. Mix the bleach with the water by connecting a clean garden hose to a nearby tap and washing down the inside wall of the well casing. This will make sure that the chlorine from the bleach mixes properly with the water throughout the well.

What do I do if my well water smells like rotten eggs?

Increase the water heater temperature to 160 degrees Fahrenheit (71 degrees Celsius) for several hours. This will destroy the sulfur bacteria. Flushing to remove the dead bacteria after treatment should control the odor problem.

Why does my water smell like poop?

Drain Obstruction

One of the common reasons is drain obstacle or drain clogs. An block in the drain will often prevent water from flowing freely through the pipes. Oftentimes, the water become stuck along with other solid materials. And once these materials start to rot or decompose, it produces a poop-like smell.

Is it safe to shower in water that smells like sulfur?

Taking a shower with sulfur water is perfectly safe. The presence of sulfur in water, which mostly gives off a “rotten egg odor”, has no known health effects on your health or overall wellbeing. If you can tolerate the smell, there's nothing wrong with showering in sulfur water.

What is the life expectancy of a water well?

A well can last 50 years (I know of one well that did). However, a drop or complete loss of water production from a well can sometimes occur even in relatively young wells due to a lowered water level from persistent drought, nearby development, or over-pumping of the well which can dewater the water-bearing zones.

Can a well pump last 40 years?

With proper well maintenance, your well pump can last, on average of 8 to 15 years, though many homeowners report their pumps lasting far longer, often between 20 and 30 years!

How much does it cost to rehabilitate a well?

Well rehab costs depend entirely on the extent of the blockage, how long it's been since the last rehabilitation, the age of the well and the presence of hard water. Rehabilitating a well can cost anywhere from under $100 to several thousand, so there's no ballpark figure.

How much does it cost to chlorinate a well?

To disinfect your well and eliminate the bacteria, you should chlorinate the well. You can hire a company that services wells to do the chlorinating. The cost ranges from $80 - $200. You can also perform the task yourself.

Why does my well water turn brown when I add bleach?

The brown is the iron in the water that has oxidized as a result of the chlorination. Normally, the iron in water is in ion form and does not display itself until it combines with oxygen and forms common rust which turns the water reddish-brown.

Can you put too much chlorine in a well?

Clear chlorine from the well by running an outside hose to the ground surface. Then run clear water through the faucets until the water no longer smells of chlorine. Avoid putting too much chlorine into the septic system, too much chlorine may kill the bacteria needed for septic decomposition.