How much does it cost to have a motorcycle chain replaced?

How much does a bike chain cost to replace? Entry level chains can start off around $15.00 with more expensive and higher performance chains ranging from $25.00 to $60.00 or more. More expensive chains increase shift quality and are generally more durable as they wear.

How much does a chain replacement cost on a motorcycle?

It really depends on the motorcycle you're working on. Chains can range in price from $20 for a plain chain for a small, lightweight motorcycle to over $200 for something like a quality O-ring chain for a bigger, more powerful bike.

How often do motorcycle chains need to be replaced?

So, how often should a motorcycle chain be replaced? In general, a properly maintained motorcycle can last 20,000 to 30,000 miles, sometimes more. But, some last as little as 5,000 to 10,000 miles. This difference is due to the type of chain, how and where you ride, and how well you maintain it.

How long do motorcycle chains usually last?

On average, you can expect to replace your chain and sprocket between 20,000 to 30,000 kilometers, less if you ride fast and hard. However, if you spot any damage to your chain or sprocket, it's better to just go and replace the prematurely-worn part right away.

What causes a motorcycle chain to break?

When a link is rusted enough, it becomes weak and can potentially break. The other big reason a motorcycle chain breaks is because of the wrong tension. If the chain is too loose, it can come out of alignment with the sprockets which will likely cause a jam.

How To Replace Your Motorcycle Chain

Can you remove a motorcycle chain without breaking it?

cutting the chain isn't that hard, you can use a grinder or dremel to grind off the top of two pins so that a plate can be popped off then just slide out the link. usually it's easiest to grind the master link pins. most chains come with a 120 links so you may have to cut it to the desired length anyway.

How often should I clean motorcycle chain?

If it gets heavy use, then clean and lubricate the chain every 500 miles. You also need to remember to clean air filter of motorcycle. In contrast, occasional motorcycle use reduces the frequency of chain cleaning. You'll only need to clean the chain every few months.

How do you maintain a motorcycle chain?

Can you put a new chain on old sprockets?

Absolutely unless you want to damage the new sprockets. A new chain mates with the new sprockets, the old chain mates with the old sprockets. It's a combined wear pattern.

What is the life of chain sprocket?

Your sprockets and chain are typically changed as a pair with 520 chains lasting up to 25,000 km and 530 chains 40,000 km if you keep clean and lubricated every 500 km.

What do you do when your motorcycle chain comes off?

If your chain comes off at the rear

Then turn the L screw clockwise until you see the rear derailleur cage (the section that hangs down) start to move away from the centre of the bike. You need to move it to the point where the chain can move freely into the largest sprocket, but can go no further than that.

Do I need to lube a new motorcycle chain?

It is best not to apply any sort of lube to a new chain until it is clearly needed, because any wet lube you can apply will dilute the factory lube. I use dry lube even through winter. Needs lubing before every ride but worth it for a clean chain.

How do you remove an old motorcycle chain?

Bend the tabs up and against the bolt flats. Relieve the chain tension by loosening the chain adjusting bolt and the rear axle nut. Then push the rear wheel forward and remove the chain (Photo 3). If the chain has a master link, remove the clip with a pair of pliers and disassemble the chain (Photo 4).

Can you remove a bike chain without a tool?

While a bike chain removal tool is designed specifically for this purpose, it is possible to remove the chain from your bike without any specialized tools. You will need other tools such as needle nose pliers and a hammer to remove the chain. Some bike chains have a master link.

Do all bike chains have a master link?

Not all bikes have these links. They are most likely to be found on BMX bikes, single speed bikes or three-speed town bikes with internal gears. The more sprockets a bicycle has on its rear cassette, the narrower the chain must be and therefore the less room there is for this extra-wide master link.

Can a broken bike chain Be Fixed?

A broken bicycle chain will render your bike useless but can be repaired on the road, at least sufficiently to allow you to ride home. You will need a bicycle chain-tool which comes as part of most multi-tools, as well as a spare quick-link.

How often do bike chains break?

Most mechanics agree that you should replace your chain about every 2,000 to 3,000 miles, depending on your riding style. Many Tour De France riders wear out two or even three chains on their primary bike over the course of the three-week race.

What's a high mileage for a motorcycle?

For small sports bikes, 20,000 to 30,000 is on the high side. For larger bikes, 50,000 miles and up is considered high motorcycle mileage. But before you write off any models, consider that a properly maintained bike can last well past 100,000 miles!