How much does it cost to chlorinate a well?

To disinfect your well and eliminate the bacteria, you should chlorinate the well. You can hire a company that services wells to do the chlorinating. The cost ranges from $80 - $200. You can also perform the task yourself.

How much does it cost to shock chlorinate a well?

How much does it cost to shock a well? If you hire a company to do it, it can cost anywhere around $100 depending on where you live. Doing it yourself will only cost as much as the chlorine, 10 gallon bucket and the safety supplies to do it.

How often do you chlorinate a well?

Homeowners with private wells should have their well water tested every 3 to 5 years for some contaminants, including bacteria. If these tests turn up positive for bacteria, chlorinating the well may be a way to resolve the problem.

Is chlorine water treatment expensive?

Chlorine based-products had a low total cost of up to $0.13 per 1,000 gallons, which favors the use of chlorination when large water volumes require treatment. Chlorine is also the treatment technology that has received the most scientific testing for pathogen control.

How long should you wait to drink water after you chlorinate a well?

Allow chlorinated water to stand in the well and pipes for at least 8 hours (preferably 12 to 24 hours). Run water from outdoor faucets to waste (away from desirable vegetation) until the chlorine odor is slight or not detected at each faucet. Then run indoor faucets until there is no chlorine odor.

Disinfecting Well/Water System: How Much Chlorine to Use

Can you shower after chlorinating well?

Keep in mind that doing laundry and taking a shower cannot be done for at least 24 hours with a chlorinated well. Waiting a few days to do these is a good idea. We recommend using unscented bleach for this process and using a chlorine test kit from your local supply store.

Why does my well water turn brown when I add bleach?

The brown is the iron in the water that has oxidized as a result of the chlorination. Normally, the iron in water is in ion form and does not display itself until it combines with oxygen and forms common rust which turns the water reddish-brown.

What are the major disadvantages of chlorination?

Chlorination is the most commonly used disinfection process to pretreat the water to reduce biofouling. Although chlorination is widely used, it has several disadvantages, such as formation of disinfection by-products and being ineffective against some types of microbes.

How much does a chlorination system cost?

These systems use small amounts of chemicals, often chlorine and hydrogen peroxide, to purify well water or rainwater. They cost $300 to $1,000 for the unit plus $300 to $500 for labor.

What happens if I drink untreated well water?

Contaminated well water can cause nausea, diarrhea and vomiting and potentially lead to serious health problems, such as cancer, kidney disorders and brain damage, says Dr.

How much does it cost to shock a well?

If the depth of the water in the well is unknown, use a volume of bleach equal to two times the 150 ft water depth for the appropriate casing diameter. For example, an 8-inch casing diameter with 150 ft water depth would require 1.85 gallons of household bleach.

Is shocking a well Necessary?

Shock chlorination is a method of disinfecting a water well. It is recommended when a water system is contaminated with bacteria. Contamination can occur when the well is installed, when repairs are made to the pump or plumbing, or when rainfall runoff enters the well.

Should you put Clorox in your well?

You can disinfect your well with household chlorine bleach such as Clorox, Purex or a generic brand. The chlorine in the bleach kills bacteria. Note that it may take more than one chlorination for your well to return a satisfactory test.

Does shocking a well get rid of coliform?

When done properly, shock chlorination will kill all the bacteria existing in a well. A recent Penn State study of wells contaminated by coliform bacteria found that shock chlorination and installation of a sanitary well cap successfully removed the bacteria for one year in 15 percent of the wells.

How long does it take to shock a well?

It will usually take 4 to 8 hours to flush the well after a standard well chlorination. The water may become discolored during flushing because the chlorine may have loosened the hard water deposits in the plumbing.

Why is water treatment expensive?

A key factor in the cost of most industrial water treatment systems is the chemistry and content of the stream to be treated. It is important to thoroughly understand the types and concentrations of substances present, as well as any variability in stream makeup.

Are there any alternatives to using chlorine for water treatment?

Bromine (Br)

Bromine is a heavy red-brown liquid that is a viable alternative to chlorine for water disinfection when water is released into the environment. Because ammonia is present in sewage water, bromamines are produced through injection of bromine and are even more effective than chloramines.

Is chlorinated water safe to drink?

Is chlorinated water safe to drink? Yes. The U.S. Environmental Protection Agency (EPA) limits the amount of chlorine in drinking water to levels that are safe for human consumption. The levels of chlorine used for drinking water disinfection are unlikely to cause long-term health effects.

What happens if you put too much bleach in well?

According to AskingLot, if you put too much bleach in your well, it can destroy the good bacteria found in the well, which can be a significant problem! The company also says that you should dilute the bleach with water so the pipes do not get ruined.

How do you keep whites white with well water?

There are a couple of alternatives to get your whites white. Wash your whites with regular detergent, add 1/2 cup of hydrogen peroxide or a scoop of borax to each load, and line dry them in the sun. You can also purchase a product called Iron Out and add it to the rinse cycle after using bleach.