How much does a yard of concrete cover at 4 inches thick?

One Cubic Yard of Concrete: 4-inches thick – covers 81 square feet.

How much concrete do I need for a 10x10 4 thick slab?

At 4″ thick, for a 10×10 slab, generally, you will need 1.23 cubic yards or 33 cubic feet or either 74- 60lb or 56-80lb bags of premixed concrete.

How much will a yd of concrete cover?

Concrete volume is measured in cubic yards. When poured on a perfectly level surface, one cubic yard will cover 27 square feet at one foot thick.

How many bags of concrete do I need for a 12x12 slab 4 inches thick?

Regarding this, “how many bags of concrete do I need for a 12×12 slab at 4 inch thick?”, its depend on thickness of slab, at 4 inches thick, generally you will need approximately either 104 bags of 60lb or 80 bags of 80lb (1.76 cubic yards or 47.52 cubic feet or 1.35 m3) of premixed concrete for a 12×12 slab.

How many yards of concrete do I need for a 24x24 x4 slab?

For example, for a concrete slab that is 24' X 24' X 4”, simply enter 4 in the Thickness/Depth field, 24 in the Width field, and 24 in the Length field. Click “Calculate”. Your answer should be 7.11 yards. Note: The Concrete Volume Calculator can also be used to determine yardage for aggregate products.

How much does a yard of concrete cover | Concrete coverage in square feet per yard

How many yards of concrete do I need for a 10x10 slab?

The amount you will need for a 10 x 10 slab is 1.3 cubic yards, we always add an extra 10% to allow for any slab depth variations or spills that may occur.

How many yards of concrete do I need for a 10x12 slab?

Regarding this, “how much concrete do I need for a 10×12 slab?”, at 4 inches thick, generally you will need approximately 1.46 cubic yards or 39.6 cubic feet (either 86 bags of 60lb or 67 bags of 80lb) of premixed concrete for a 10×12 slab, at 5 inches thick slab, 1.85 cubic yards or 50 cubic feet (either 109 bags of ...

How many 80lb bags of concrete make a yard?

One 80lbs bag of Quikrete Concrete Mix will yield approximately . 60 cu ft. So it will take 45 bag to equal one cubic yard of concrete. If you have a project over a 1/2 a cubic yard you should consider our Mix On-site Concrete especially if you are hand mixing.

How much does it cost to pour a 24x24 slab of concrete?

A typical 24x24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.

How many yards of concrete do I need for a 10x20 slab?

Regarding this, “how much concrete do I need for a 10×20 slab?”, at 4 inches thick, generally you will need approximately 2.44 cubic yards or 66 cubic feet or 1.969 m3 (either 144 bags of 60lb or 111 bags of 80lb) of premixed concrete for a 10×20 slab, at 5 inches thick slab, 3.07 cubic yards or 83 cubic feet or 2.35 ...

How do I calculate how much concrete I need?

What size is a yard of concrete?

how is a yard of concrete measured? There are 27 cubic feet in one cubic yard. A cubic foot measures 12 inches wide x 12 inches high by 12 inches deep.

How many square feet is a yard of concrete 5 inches thick?

There are approximately 65 square feet in a cubic yard of concrete at 5 inches thick. A cubic yard of concrete yields 27 cubic feet and 5 inch thickness in feet 5÷12= 0.416 feet, so number of square feet in a cubic yard of concrete at 5 inch = 27 ÷ 0.416 = 65 square feet.

How thick should a concrete slab be for a shed?

The best concrete thickness for a shed tends to be 4 inches which is the standard size used for most residential concrete patios, walkways and sidewalks. You can pour 6-8 inches if your storing something heavier but it's rare. Concrete slabs are typically poured over 5-8 inches of compacted gravel and earth.

Does a 10x10 concrete slab need rebar?

Rebar is not necessary for every concrete project. The general rule of thumb is that if you are pouring concrete that is more than 5 inches in depth, you are probably going to want to add in some rebar to help reinforce the entire structure.

How many bags of concrete do I need for a 10x10 slab 3 inches thick?

The amount of concrete you need for a 10 x 10 slab that's 3 inches thick is 1 cubic yard.

How thick should a garage slab be?

The concrete slab should be four inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region. The standards are expressed in terms of "compressive strength," which boils down to the amount of water used in the mix.

How much does it cost to pour a 20x20 slab of concrete?

But how much does a 20×20 concrete slab cost? You can expect to pay between $1,600 and $3,200 for a 20×20 slab. The estimates are based on the average cost of $4 to $8 per square foot for a concrete slab.

How thick should a concrete patio be?

Four inches is the minimum thickness for a concrete patio. You'll want to make it six to eight inches thick if the patio will support a structure such as a gazebo or hot tub.

How big is a yard of concrete 4 inches thick?

One Cubic Yard of Concrete: 4-inches thick – covers 81 square feet.

How many yards is a pallet of concrete?

Since there are 27 cubic feet in one cubic yard, a pallet of concrete covers just under 1 cubic yard. Since there is the same amount of concrete on both 80 and 60 lb. pallets, they can both be expected to contain the same amount of cubic yards of concrete – 25.2 cubic yards.

How many square feet does a 80lb bag of concrete cover?

80 lb bag of concrete cubic feet

80 lb bag of concrete yields 0.60 cubic feet which is approximately around 0.0222 cubic yards that will cover around 3.6 sq ft area up to standard depth of 2 inch excavation or backfills, and for 1 cubic feet of landfill you will need 1.66 bags of 80 lb concrete.

How big of a pad will 10 yards of concrete cover?

How much does 10 yards of concrete cover. 10 cubic yards of normal weight or mix or crushed concrete will cover approximately 1080 square feet at 3 inches deep, or 800 square feet with 4 inches thick, or 650 square feet with 5 inches deep, or 540 square feet at 6 inches deep.

How thick should a concrete driveway be?

As for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.