How much does a gallon of deck paint cover?

You need one gallon of paint for every 300 to 400 square feet. If bare wood is being covered, it will soak up more paint and you'll get closer to 300 square feet of coverage per gallon. If you're covering a previously painted deck, you will get closer to 400 feet per gallon.

How much does it cost to paint a 12x12 deck?

The cost to paint a deck ranges from $600 to $1,500 or about $2 to $5 per square foot.

How many coats of paint does a deck need?

Apply 1-3 coats of paint.

Paint the floor of the deck a few boards at a time, making sure you have a clear path on and off the deck so you do not paint yourself into a corner. Applying 3 coats will ensure the paint is durable and make the paint easier to maintain.

How do you measure a deck for painting?

Measure the deck's length and width and multiply the two numbers to determine the square foot of the surface. For example, a 10-foot by 20-foot deck has 200 square feet of surface. Most will also want to paint deck steps (if applicable), so measure those and add to the total.

How many sq ft does a 1 gallon bucket of paint cover?

Paint usually is applied at 350 to 400 square feet per gallon (primer at 200 to 300 square feet per gallon).

How to Paint a Deck

How many square foot does a 5 gallon bucket cover?

Using the same logic, you can safely say that a five-gallon bucket will conveniently offer 1,500 to 2,000 square feet of coverage.

How many gallons of paint do I need for 800 sq ft?

Two gallon cans of paint cover up to 800 square feet, which is enough to cover an average size room. This is the most common amount needed, especially when considering second coat coverage.

Can I paint over old deck paint?

You don't need to remove old paint before painting a deck. You only need to remove old paint if it's blistering, cracking, or peeling. Otherwise, the new layer will bubble and peel soon after. If the old paint is still in good shape, paint over it.

How much will 10 gallons paint cover?

Most professionals use the formula of 350 to 400 square feet of wall coverage per gallon of paint and 200 square feet of wall coverage per gallon of primer. It's important to note that different types and manufacturers may cover more or less area.

Do I need to prime my deck before painting?

Priming the Deck

As with any painting job, it is also very important to prime the surface before applying paint or stain. Your deck boards need to be properly primed because they are constantly exposed to varying temperatures, moisture, humidity, and lots of foot traffic.

How much paint do I need for a 500 square foot deck?

You need one gallon of paint for every 300 to 400 square feet. If bare wood is being covered, it will soak up more paint and you'll get closer to 300 square feet of coverage per gallon. If you're covering a previously painted deck, you will get closer to 400 feet per gallon.

Can you paint a deck with a roller?

Rolling can allow you to pain at least two times faster than painting with a brush. You will also find that you can paint hard-to-reach areas, especially those tall areas on your deck. Rollers are very inexpensive to get, and they offer very good coverage on your deck, no matter if you are using stain or paint.

How long does deck paint last?

When you opt to paint your deck, you won't have to refinish it anytime soon. A quality paint job, finished by a trusted professional, can last for ten years before needing repainting. Conversely, stains need reapplied every few years because they don't offer the same protection against outdoor elements.

Is it cheaper to paint or stain a deck?

Stain is more budget-friendly.

Stain runs between $20 and $35 per gallon, while exterior paint suitable for decking ranges from $30 to as much as $60 per gallon. Plus, if painting, you'll have to factor in an extra $15 to $40 per gallon of wood preservative and $15 to $30 per gallon of primer.

How much stain do I need for a 20x20 deck?

To stain a 20x20 ft² deck area, you'll need approximately 2 and 1 quarter gallons (2.25 gal). You can get this result by assuming that 1 gallon can cover up to 175 ft². Also, consider this amount is for one coat of stain.

How much does it cost to have someone paint your deck?

Prices for deck painting and staining run about $2-$5 per square foot, depending on the size and condition of your deck. The type of paint or stain you choose will also affect the overall cost. Most projects average between $300-$1,200.

How much does it cost to paint a 2500 square foot house exterior?

As a rule of thumb, the average gallon of exterior paint covers 300-400 square feet of surface area. That means you will need 8-10 gallons to paint the exterior siding of a 2,500 sqft house (one coat).

How much area does a gallon of Behr paint cover?

One gallon of any BEHR paint is enough to cover between 250 to 400 square feet of surface area with one coat. To determine the number of coats your project requires, first examine the surface you'll be painting.

How do I figure out how many gallons of paint I need?

Multiply length x width to get the square footage of trim to be painted. Divide the total by 400 to get the number of gallons of paint you'll need for one coat. You'll likely need less than a gallon for a standard room, so consider buying trim paint in a quart or two.

What causes deck paint to peel?

Moisture - The number one enemy of paint is moisture. Water vapor separates the paint from the wood, and any attempt at bonding will fail.

What is the best Colour to paint decking?

Should I sand my deck before painting?

The deck should be sanded after it is stripped and before a coat of stain or paint is applied. A solid stain or paint commonly lasts for five years and a transparent stain for one to two. If water doesn't bead on the deck, then it is being absorbed. A sure sign it is time to sand and protect it again.

How many gallons does it take to cover 1000 square feet?

On average you would use about 2 gallons of water per 1000 sq/ft.

How many gallons of paint do I need for 350 square feet?

One gallon of paint covers approximately 350 square feet.

How many gallons of paint do I need for a 2200 square foot house?

You may be wondering how many gallons of paint do I need for a 2200 square feet house:– as per general guidelines, for painting of house of a 2200 square foot area, generally you will need approximately 10 to 12 gallons of exterior paint, 2 gallons paint for exterior trim, 15 to 16 gallons of interior paint and 3 ...