How much does a 5 gallon bucket of driveway sealer cover?

Asphalt Sealer Prices

Note: The typical 5-gallon sealcoat container can cover between 250-500 square feet depending on the material's condition and texture. For simplicity's sake, these examples use five gallons that cover the maximum 500 square feet.

What is coverage for 5-gallon driveway sealer?

5. Divide the square footage of the driveway by 80 to find the number of gallons of sealer you need for one coat. Each gallon covers about 80 square feet and each bucket of sealer contains 5 gallons.

How much does a 5-gallon bucket of driveway sealer cost?

Asphalt driveway sealants cost $0.06 to $0.38 per square foot, which works out to $40 to $165 per 5 gallons, based on the average 5-gallon sealcoat covering up to 500 square feet. But remember, the cost per foot and the amount of product you need varies based on the viscosity of the sealant.

How many square feet will 5 gallons of paver sealer cover?

Not intended for stone or clay. Great coverage rate: 250-400 square feet per gallon, per coat.

Do driveway sealers need two coats?

Most driveway sealer manufacturers recommend two coats with a minimum drying time of eight hours between coats, so this driveway sealing project will fill an entire weekend.

HOW MUCH DOES ASPHALT SEALING COST PER SQUARE FOOT?

How much sealcoat do I need?

Coverage rate:

Total of 2 coats – average coverage around 50 square feet per gallon (or 5 square yards).

How many square feet will a 5-gallon bucket of blacktop sealer cover?

Average Asphalt Sealer Prices

Note: The typical 5-gallon sealcoat container can cover between 250-500 square feet depending on the material's condition and texture. For simplicity's sake, these examples use five gallons that cover the maximum 500 square feet.

How much does a 5-gallon bucket of driveway sealer cover concrete?

How Much Does a 5-Gallon Bucket of Driveway Sealer Cover? Each gallon of sealer will cover roughly 80 square feet of pavement.

What is the best product to seal an asphalt driveway?

Coal Tar Sealer

Coal tar asphalt driveway sealer is considered the standard for asphalt — in some places, that is. The preferred choice for both asphalt driveways and streets for many years, coal tar sealer is made from sticky coal tar. It can last for up to five years on a driveway.

How many square feet is a driveway?

Size: The average 2-car driveway in the U.S. is 16 x 40 feet, or a total of 640 square feet. Many driveways may be larger or smaller, depending on the distance from the garage or house to the street and possible extensions for RV parking.

How long does driveway sealer last in the bucket?

If the product does freeze, do not use it. If the product is protected from freezing and stored in a heated room at 50 degrees or higher, you should be fine. Driveway Sealer should be used within 1 year of purchase.

Is sealing driveway worth it?

Yes, it is a necessity as you need to protect your valuable asset. If you want your driveway to last, seal coating is the way to go. Unprotected asphalt leads to cracks and potholes that can severely damage your foundation.

How much does it cost to spray seal a driveway?

National Average: $486

According to Angi and HomeAdvisor, driveway sealing costs can range from $250 to $768, with the national average at $486. Asphalt sealcoating products typically range from $0.06 to $0.38 per square foot.

How many coats of concrete sealer should I use?

Concrete sealers are best applied in two thin coats. The first coat of sealer acts like a primer. Most of it will disappear into the concrete surface, and the concrete will probably look fairly unattractive after the first coat. The second thin coat will provide an even finish, color enhancement and gloss.

Can you seal coat a cracked driveway?

Sealcoating Your Asphalt Driveway

Sealcoating involves applying a liquid sealant over your existing asphalt pavement to seal the surface and fill cracks. The process protects the sublayers and foundation from the elements and delays driveway replacement.

What is the coverage for concrete sealer?

Penetrating concrete sealers will typically cover anywhere from 100 – 400 square feet per gallon. Two coats are usually recommended so this will cut the coverage amount in half to 50 – 200 square feet per gallon for 2 coats.

Is water based driveway sealer better than oil based?

Sealcoating your driveway starts with deciding whether to use water or oil-based sealers. Although both types have advantages, water-based sealers' shorter cure time and eco-friendliness make it the better choice in many situations.

Which is better latex or oil based driveway sealer?

The oil based, he said, will bind with the original paving material whereas latex will just cover it. That being said, if you sealcoat with a latex sealer, going over that coat with an oil based coating will do you little to no good.

How much water do you add to sealcoat?

In general, we recommend the water dilution at 30-40%.

How is crack sealing calculation?

It's easy to calculate how much sealcoat you need, simply measure the length L in feet and width W in feet of the area you want to seal. Multiply them together to get a total measurement in square feet. Fill in the blank with the total number of square feet and the calculator will return the number of gallons you need.