How much does a 3 ton package unit cost?

The cost of a 3 ton AC unit is about $6,100 installed. That's the outdoor condensing unit, pad if needed, refrigerant line set, refrigerant charge, coil installed in the furnace or air handler, and all other installation materials and supplies.

How much should a 3 ton AC unit cost installed?

A 3-ton AC unit cost runs homeowner around $3,400 to $3,700. When it comes to a 3.5-ton AC unit cost, you will pay around $3,500 to $3,700. A 4-ton AC unit cost is $3,700 to $3,800 on average. When it comes to a 5-ton AC unit cost, you will see pricing around $3,800 to $4,000.

What is the average cost of a 3 ton HVAC system?

Residential HVAC unit cost per ton

An average 3-ton HVAC unit costs $1,700 to $5,000. Models with high SEER ratings cost the most upfront but are more energy-efficient and cost less to run.

How much does a package unit cost?

The average cost of a gas pack unit installed is $6,775. The low price is about $3,800, and the most expensive gas packaged units are about $8,400 installed. These are direct replacement prices. If new ductwork or other major modifications are required, they will be additional costs.

How many square feet does a 3 ton AC unit cover?

How many square feet does a 3-ton air conditioner cover is quite easy to answer as well. 3-ton is equal to 36,000 BTU. If you apply the 20 BTU per sq ft rule of thumb, you can see that a 3-ton air conditioner cools about 1,800 square feet spaces.

How Much Should a New Air Conditioning Unit Cost?

How big of a house will a 3 ton AC unit cool?

And manufacturers do provide estimates, which helps homeowners narrow down their choices. For example, a 30,000 BTU, 2.5-ton air conditioner is made to effectively cool a home between 1,200 and 1,500 square feet. A slightly larger 3,600, 3-ton unit, is designed for homes that are 1,500 to 1,800 square feet.

How many rooms can a 3 ton AC cool?

It can be used to cool a single room or an entire house. So, how many square feet a 3-ton air conditioner cools? Generally, a 3-ton air conditioner can comfortably cool a 1500 square feet room. For an entire house, a 3-ton air conditioner is usually sufficient for a 2000 sqft insulated house.

How much does an HVAC package unit cost?

According to HomeAdvisor, full HVAC unit replacement costs range from $5,000 to $10,000, with the national average at $7,000. This comes out to about $25 to $60 per square foot. Prices depend on the size and brand of the HVAC system, the size of the house, ductwork length, and the new unit's efficiency rating.

How much does an air conditioner cost for a 2500 sq ft home?

Replacing a 3 to 5-ton AC unit costs $3,000 to $8,000 for a 1,500 to 2,500 square foot home.

How long do gas packs last?

Lifespan of a Gas Pack Unit

With proper air conditioner maintenance and annual furnace service, you should expect your gas pack unit to last between 8-12 years on average. Some gas pack units will fail earlier than eight years and others, with less than harsh conditions, can last longer than 12 years.

Why is HVAC installation so expensive?

Conclusion. When it comes down to it, the most expensive parts of any HVAC unit installation will be the machine and the labor. The device is so expensive because it is filled with complicated electrical gadgets that measure airflow and temperature.

What size AC unit do I need for a 2000 square foot house?

If your home is 2000 square feet, you can calculate your HVAC needs the same as you would for a 1600 square foot home. Assuming one ton of cooling capacity can cool 400 square feet of your home, you'll need about 5.0 tons of air conditioning capacity. Multiply this by 12,000 BTUs, and you'll get 60,000 BTUs.

Is 18 SEER worth the money?

In general, 18-SEER air conditioning systems are more efficient and provide better overall comfort than 14-SEER units. When considering the price difference, you should also consider the long-term energy savings that 18-SEER units offer.

How much more efficient is a 16 SEER vs 14 SEER?

A 16 SEER unit is about 13% more efficient than a 14 SEER. For every $100 you spend to cool your home with a 14 SEER, you could save $13 on your monthly bill by upgrading to the 16 SEER unit. But just like gas mileage, your ability to meet this maximum efficiency and savings depends on a lot of other factors.

What SEER rating do I need?

For most homeowners, opting for a unit with a SEER between 15 and 18 is a good choice because it's a balance between the money you'll spend for the unit and the amount you'll save on utility costs.

What size air conditioner do I need for a 3000 square-foot house?

Since larger homes are costlier to cool, you'll need a 5-ton unit to cool a 3,000 square-foot home.

Can I replace a 3 ton AC with a 4 ton?

Proper size is a must. There is no reason for you to install a 4 ton if you can use a 3 ton. The low stage isn't that much less than full capacity because of the unloading scroll systems.

What size air conditioner do I need for a 2400 square-foot home?

A window or portable AC designed for a room would typically be described with BTUs, while a whole-home AC would be described by how many tons it is. If you have a 1,200-square-foot home, you'd need a two-ton unit. A 2,400-square-foot home would need a four-ton unit.

Can I just replace my outside AC unit?

Even if you could find an outdoor unit that uses the same refrigerant as your old indoor unit, we would still advise against replacing only the outdoor unit because it would likely create a mismatched system.

How much should a new furnace and air conditioner cost?

If you're planning to replace both your furnace and your air conditioner at the same time, you can expect to pay anywhere from $8,000 to $15,000+.

How long do HVAC units last?

#1: Your energy bills are going up.

Remember, while the average HVAC system lifespan is 10–25 years, your HVAC system may last less time than that if it has been overworked by insufficient insulation and unwanted airflow (due to unsealed air leaks).

Is 3 ton AC big enough?

Pro Tip: as a rule of thumb, the maximum AC unit size you need to install should not be more than 15% more than the BTU's you need to cool your house. This means that if your house requires a 24,000 BTU unit (2 tons), you should not install one that is larger than 30,000 BTU's (3 tons) to maintain energy efficiency.

What size AC unit do I need for a 1800 sq ft house?

1,201 to 1,500 square feet homes should use 2.5 tons. If your home size is higher than the number above but is less not more than 1,800 square feet, you can go for a three-ton A/C. Choose a unit that is 3.5 tons if your home measures more than 1,800 but not more than 2,100 square feet.