How much chlorine do I add to my pool?

The most important factor though is the size of the pool. You'll need about 52-104 oz of liquid chlorine per 10,000 gallons of water. This amount should get the chlorine level to between 5 and 10 ppm.

How much chlorine do you put in a pool everyday?

Generally, you should maintain the pool's chlorine level between 1 and 3 ppm. Thus, if the chlorine level is already 1 ppm and you want it higher, add 0.00013 ounces per gallon to raise the chlorine by 1 ppm.

How much chlorine are you supposed to put in a pool?

Regardless of how frequently or what system you use to add chlorine to the water, the chlorine level should stay between 1.0 and 3.0 parts per million (ppm) to maintain a healthy pool.

How much chlorine do I add to my pool for the first time?

If you're adding chlorine for the first time, add the amount of product required to achieve a free available chlorine level of 2 to 3 ppm. The instructions will let you know how much to use to raise levels by 1 ppm per 10,000 gallons (38,000 L) of water.

How much chlorine does a pool need per week?

Figuring How Much Chlorine to Add

Add one tablet for every 5,000 gallons of water and always round up. For example, if your pool has 21,000 gallons of water, add five tablets per week. If it has 8,000 gallons, use two tablets.

How Much Chlorine Do I Add To My Pool?

How long after putting chlorine in pool Can you swim?

Liquid chlorine — In general, it's a good idea to wait at least four hours after putting liquid chlorine in the pool. The size of your pool and the amount of chlorine added does play a factor in this, too. Once your levels reach 5 ppm or lower, you're ready to swim.

How many gallons does a 1 inch chlorine tablet treat?

Tablets typically come in two sizes—3-inch chlorinating tablets, which are typically best for larger swimming with a volume of 5,000 gallons or more. Or, 1-inch chlorinating tablets, which are best for smaller pools that are less than 5,000 gallons.

How much chlorine do I put in a 10000 gallon pool?

The most important factor though is the size of the pool. You'll need about 52-104 oz of liquid chlorine per 10,000 gallons of water. This amount should get the chlorine level to between 5 and 10 ppm.

How do I treat my pool for the first time?

How do I know if my pool needs chlorine?

How much chlorine do I put in a 5000 gallon pool?

6 ounces initially per 5,000 gallons and a a maintenance dose of . 75 ounces per 3,000 gallons every week. Initially you will need stabilizer to protect the chlorine from the sun. This is added at a rate of one pound per 3,000 gallons of water.

Is it safe to swim in low chlorine pool?

The Bottom Line about Pools and Chlorine

As mentioned above, you could probably swim in a pool without chlorine without any major health issues. However, long-term use of a pool lacking chlorinated H2O could make you sick or, at the very least, contribute to rashes and other types of skin irritation.

Can you over chlorinate a pool?

Of course, too much chlorine in pool water can be dangerous. Exposure to over-chlorination can provoke asthma, lung irritation, and potentially skin and eye irritation. As well as being potentially bad for you, it's bad for your pool.

Is shock and chlorine the same thing?

SKIMMER NOTES: No. Chlorine and shock are not the same thing. Shock has a more intense chemical strength than the traditional chlorine sanitizers, and it also differs in how you should apply it to your swimming pool.

How much chlorine do I put in a 4000 gallon pool?

Chlorine Stabilizer: Increases the life of the chlorine by 3 -4x. o Chlorine Tablet Pool: ONLY add 1lb per 4,000 gallons.

Can I just throw chlorine tablets in my pool?

NEVER just throw them into your pool water. This will cause them to dissolve on the floor and it can damage and create a permanent bleach stain to your liner or concrete.

How much bleach do I put in my above ground pool?

Clorox itself recommends using between 100 and 200 ounces of regular-strength bleach per 10,000 gallons of pool water -- one gallon is 128 ounces, and many bottles of bleach are available in one-gallon or half-gallon sizes.

Can I shock my pool with liquid chlorine?

Sodium hypochlorite (also known as liquid chlorine) is another frequently used option for shocking pool water. This is a common choice in pool shock because you can pour the solution directly into the pool without having to dissolve the chlorine in water beforehand.

How much chlorine do I put in my Intex pool?

Use 1-3 tablets at a time, depending on your pool size. You'll need enough to establish and maintain proper chlorine levels. Small Intex pools under 12′ in diameter should use 2-4 of the 1″ tablets in a chlorine floater. In addition to everyday chlorination of your Intex pool, you may have heard of shocking the pool.

Is liquid chlorine better than shock?

Liquid chlorine is generally less costly than granular shock and comes in refillable containers, where granular shock does not. Liquid chlorine does not need to dissolve in your water as it is already in liquid form. In addition, liquid chlorine is non-scaling and leaves no residue.