How many square feet does a gallon of seal coat cover?

Below are general guidelines for applying sealer based on a typical application scenario. Total of 2 coats – average coverage around 50 square feet per gallon (or 5 square yards).

How much does 1 gallon of sealer cover?

One gallon of our sealer can be applied to one coat to cover 1500 square feet, this will achieve a simple no gloss look.

How do you estimate seal coating?

Simply measure the width and length of your sealcoating area, and multiply it to find how many square feet you are sealing. If it's a small driveway, then you can use a tape measure or measuring wheel.

How far does a gallon of driveway sealer go?

Penetrating concrete sealers will typically cover anywhere from 100 – 400 square feet per gallon. Two coats are usually recommended so this will cut the coverage amount in half to 50 – 200 square feet per gallon for 2 coats.

What is coverage for 5 gallon driveway sealer?

5. Divide the square footage of the driveway by 80 to find the number of gallons of sealer you need for one coat. Each gallon covers about 80 square feet and each bucket of sealer contains 5 gallons.

HOW MUCH DOES ASPHALT SEALING COST PER SQUARE FOOT?

How many gallons of seal coat do I need?

Coverage rate:

Total of 2 coats – average coverage around 50 square feet per gallon (or 5 square yards).

Can you put driveway sealer on too thick?

However, if sealcoating is applied too thickly, it will not dry evenly. In addition, your sealcoating will not hold up to traffic and will need to be reapplied ahead of schedule to maintain adequate protection for your pavement. Thicker can be better when you are considering the number of coats.

Do driveway sealers need two coats?

Applying two coats of any sealer will dry and create a better finish much better than one thick coat. These sealers are water based, and they cure and form a film primarily during the evaporation of water from the coating. A thin coat will evaporate much faster and create a single uniform layer.

How much does 5 gallons of driveway sealer cost?

Asphalt driveway sealants cost $0.06 to $0.38 per square foot, which works out to $40 to $165 per 5 gallons, based on the average 5-gallon sealcoat covering up to 500 square feet. But remember, the cost per foot and the amount of product you need varies based on the viscosity of the sealant.

How much is a 5-gallon of driveway sealer?

This product is reasonably priced at $30 for 5 gallons. I would like to know if Lowes ever puts it on sale. It stirs easily at least at an air temperature of nearly 60 degrees.

How much will a gallon of concrete sealer cover?

Coverage: For best results apply Concrete Sealer at a rate of 200 square feet per gallon (950 square feet per 4.75 gallon pail). Concrete Sealer is a professional grade 100% Acrylic water-based clear drying emulsion.

How many coats of concrete sealer should I use?

Concrete sealers are best applied in two thin coats. The first coat of sealer acts like a primer. Most of it will disappear into the concrete surface, and the concrete will probably look fairly unattractive after the first coat. The second thin coat will provide an even finish, color enhancement and gloss.

How many square feet will 1 gallon of concrete cover?

More porous concrete will result in a lower coverage rate and thus more stain will be required. On average, acid stains will cover 200 to 400 square feet per gallon, while water based stains will cover slightly more at about 250 to 450 square feet per gallon.

Does sealcoating fill cracks?

Does sealcoat hide cracks and crack filler, making pavement look like new? No, it does not. You will see crack filler through sealcoat, as the crack filler is designed to expand and contract with temperature changes.

Can you seal coat a cracked driveway?

Sealcoating Your Asphalt Driveway

Sealcoating involves applying a liquid sealant over your existing asphalt pavement to seal the surface and fill cracks. The process protects the sublayers and foundation from the elements and delays driveway replacement.

How much does it cost to spray seal a driveway?

In the United States, the average cost for materials and labor to sealcoat asphalt is $0.17 to $0.24 per square foot. For a basic 480 square foot driveway, you can expect to pay $80 to $115 for sealing. For a larger 1,000 square foot driveway, contractors typically charge between $170 and $240 for sealcoating.

Which driveway sealer is best?

How much patio sealer do I need?

Each subsequent coat needs half the amount of sealer. So for example, if your first coat needed a 5L tin to coat your patio, the second will need 2.5L and the 3rd coat will only need 1.25L. If you are applying a second or third coat, wait for the previous coat to begin to dry out before applying the next coat.

How much water do you add to sealcoat?

In general, we recommend the water dilution at 30-40%.

How much does a bucket of seal coat cover?

Average Asphalt Sealer Prices

Note: The typical 5-gallon sealcoat container can cover between 250-500 square feet depending on the material's condition and texture. For simplicity's sake, these examples use five gallons that cover the maximum 500 square feet.

Is oil based driveway sealer better?

Unlike water-based driveway sealers, oil-based varieties have a longer cure time and distinct odor that is quite strong and often lingers in the air for days after the sealing is complete. Oil-based sealers also contain VOCs, or volatile organic compounds, which pollute the environment.

How far does asphalt sealer go?

One gallon of sealer covers approximately 80 square feet of driveway.