How many soft drinks should you have at a wedding?

It turns out, there is a magic formula when it comes to calculating the amount of drinks you'll need for your wedding, sort of: Plan for at least one drink per person per hour. (So for a six-hour wedding with 100 guests, you'll need roughly 600 drinks.)
Takedown request   |   View complete answer on brides.com


How many drinks does the average wedding guest drink?

As a general rule of thumb, plan to serve one drink per guest per hour of reception. In other words, if you're having a four-hour reception with 100 guests, provide 400 servings of alcohol. Full bars typically offer beer, wine, and liquor.
Takedown request   |   View complete answer on marthastewart.com


How many bottles of soft drinks do I need for a party?

In general, plan on two beverages per guest during the first hour of your party, and one each hour after that. Quite often, parties last at least two hours, though yours may go a little longer depending on the occasion.
Takedown request   |   View complete answer on thespruce.com


How many drinks do you need for 200 guests?

200 GUESTS:

350 bottles of beer. 30 bottles of liquor (750 ml)
Takedown request   |   View complete answer on womangettingmarried.com


How do you calculate wedding drinks?

Here's the basic wedding alcohol calculator equation:
  1. Guest Count x Length of Reception = # of Drinks.
  2. Wine + Beer: 75% Wine, 25% Beer.
  3. Wine + Beer + Liquor: 50% Wine, 20% Beer, 30% Liquor.
  4. Keep in mind:
  5. Let's keep going:
  6. Two more facts to keep in mind:
  7. In this case, keep in mind:
  8. Let's keep going:
Takedown request   |   View complete answer on thebudgetsavvybride.com


My Wedding Drinks Reception (HOW TO PLAN IT)



How much wine do you need for a wedding of 100?

Take the number of guests and divide by 2.15 for how many bottles to buy. So let's say the wedding will have 100 guests. If you divide the number of guests by 2.15, you should expect to get about 46 bottles of wine for the event. Make sure when you order to round up by the case.
Takedown request   |   View complete answer on winefolly.com


How many sodas should I get for 100 people?

Depending on the length of the party, you can provide 200 cans or 20 2-liter bottles for 100 guests. Add an additional serving per guest each hour if the party lasts longer than two to three hours.
Takedown request   |   View complete answer on homex.com


How many bottles of soda do I need for 100 guests?

It turns out, there is a magic formula when it comes to calculating the amount of drinks you'll need for your wedding, sort of: Plan for at least one drink per person per hour. (So for a six-hour wedding with 100 guests, you'll need roughly 600 drinks.)
Takedown request   |   View complete answer on brides.com


How many bottles of water do you need for a party of 100?

100 guests: 20 bottles.
Takedown request   |   View complete answer on hopsandbubbles.co.uk


How do you calculate drinks per person for a party?

During a party, plan one bottle for every two guests. Beer: Estimate that guests will drink about 12 ounces (one bottle) every half hour to hour during the party. Cocktails: Allow 1-1/2 ounces of liquor for each drink. A 750-milliliter bottle (fifth) makes about 16 drinks.
Takedown request   |   View complete answer on bhg.com


How much alcohol do I need for 30 guests?

1. Consider your guest count: our rule of thumb is you should plan for one drink per person, per hour of the party (so, if you are having a 30 person party for two hours, you would plan to serve 60 drinks total).
Takedown request   |   View complete answer on mathesandco.com


How do you serve soda at a party?

10 Ways to Serve Drinks at Your Next Outdoor Party
  1. Use a Beverage Stand or Raised Planter. ...
  2. Use an Outdoor Console Table as a Bar. ...
  3. An Outdoor Tray is a Must-Have. ...
  4. An Outdoor Bakers Rack. ...
  5. Pull Up a Bar Cart. ...
  6. Need A Last Minute Serving Space? ...
  7. Don't Sweat It — Use a Beverage Tub. ...
  8. Dress Up Your Potting Bench in Its Finest.
Takedown request   |   View complete answer on ballarddesigns.com


How much alcohol do I need for 100 guests?

How much alcohol do you need for 100 guests? For a 4 hour party with 100 guests, you will need approximately 400 drinks: 160 beers, 144 glasses of wine (29 bottles) and enough for 96 individual cocktails (amounts will depend upon what type of cocktail you serve). If you aren't serving wine, plan on 240 cocktails.
Takedown request   |   View complete answer on reventals.com


What drinks to serve at a wedding?

The 7 Best Cocktails to Order at a Basic Wedding Bar
  • Gin Martini – Gin, Dry Vermouth, Olives/Lemon (optional garnish) ...
  • Whiskey Ginger – Whiskey, Ginger Ale. ...
  • Kalimotxo – Red Wine, Cola. ...
  • Gin and Tonic – Gin, Tonic. ...
  • Old Fashioned – Whiskey, Sugar, Bitters, Cherry (optional garnish)
Takedown request   |   View complete answer on vinepair.com


How many beers do I need for 150 guests?

A 150-person party that lasts 5 hours would require about 750 drinks if guests expect to drink one drink every hour. This means, if the only beverages you are serving are beer, you can use up to six kegs or nearly 30 bottles or cans of 24-packs.
Takedown request   |   View complete answer on blacktailnyc.com


How can I save money on alcohol for my wedding?

15 Ways To Save Money On Alcohol For The Wedding Celebration:
  1. Choose a Reception Style That Gives Off Less of a Party Vibe.
  2. Create a Signature Drink.
  3. Buy the Alcohol Yourself.
  4. Shop Around for an All-Inclusive Package.
  5. Ask Questions.
  6. Skip Some of the Unnecessary Drinks.
  7. Cut Your Guest List.
  8. Go Dry.
Takedown request   |   View complete answer on chattersource.com


How many cans of beer do you need for a wedding?

If beer is served at your wedding reception, the general rule is to have one beer per guest per hour of the party. To calculate the number of beers put in the number of beer drinkers and the number of hours the reception will last.
Takedown request   |   View complete answer on omnicalculator.com


How much alcohol do you need for a wedding of 50?

For every 50 guests, you will need 34 bottles of beer, 7 bottles of wine and 2 bottle of liquor (per hour). For every 100 guests, you will need 67 bottles of beer, 14 bottles of wine and 4 bottle of liquor (per hour).
Takedown request   |   View complete answer on eventplanning.com


How many bottles of water do you need for 200 guests?

How Much Bottled Water to Supply for Wedding. As a rule of thumb, offer one bottle of water per guest (or you can do the 75% rule — offer enough for 75% of your guests, since that's typically the number of guests you can expect to be present during the ceremony itself).
Takedown request   |   View complete answer on emmalinebride.com


How many sodas is too many?

Drinking more than 2 sodas per day can increase your risk of dying, study finds. (WTNH) — According to a new study, those who drink more than two glasses of soda or any soft drink per day have a high risk of dying.
Takedown request   |   View complete answer on kxan.com


How many sodas are in a case?

For consumer foodstuff such as canned goods, soda, cereal, and such, a case is typically 24 items, however cases may range from 12 to 36, typically in multiples of six.
Takedown request   |   View complete answer on en.wikipedia.org


How much is Prosecco for a wedding reception?

So, if you are planning on serving Champagne or Prosecco you can expect your guest to drink 3 to 4 glasses each, this equates to 1/2 to 2/3 of a bottle per person.
Takedown request   |   View complete answer on hibiscusfood.co.uk


How many bottles of Champagne do you need for a wedding toast?

Do you need a specific number of bottles of Champagne for a Champagne toast? ? Champagne toasts require less wine, since you only need to pour about a third of the glass. Thus, you should allocate one bottle of bubbly per ten people.
Takedown request   |   View complete answer on blacktailnyc.com