How many rings do you need for pinch pleat curtains?

For a pinch-pleat window treatment, you generally need the same number of rings as there are pleats. One ring goes at each pleat to hang the panels securely. For flat panels, you usually need one ring for every 4 to 8 inches of curtain rod length.

How many pinch pleat hooks do I need?

You need 1 hook for each pleat, as well as one on each end. So if you have 6 pleats, you'll need 8 hooks. Also, count the number of rings or gliders you have on your curtain pole or track. They should equal the number of hooks you have.

How far apart should curtain rings be?

I like to space ring clips approximately four inches apart so that there is a handsome fold between each clip in the drapery panel. Start by clipping each end of the panel. Next, clip the middle. Finally, space the clips evenly apart as close to 4 inches as possible.

How are pinch pleats calculated?

Carolina Custom Draperies notes that you should multiply the total width by 2.5 and record the result. This allows for the proper amount of fullness for the pleated drapes. For example, if the total width is 84 inches, multiply 84 by 2.5 to get 210 inches, the calculated fabric width.

How far apart are pinch pleats?

Standard spacing is 5 pleats per 54” fabric width, however can be adjusted to accommodate different fullness levels. Standard fullness is 200% unless otherwise specified.

Hanging your Pinch Pleat Curtains - Curtains Made For Free

Can you hang pinch pleat curtains without hooks?

PINCH PLEATED CURTAINS can hang on either a track or a rod with rings like in this pictures above. The type of hooks you can use either slip in next to the pleats or have a spike that you pierce through the pleat at the back.

How many curtain hooks do I need?

To calculate how many you need, divide the length of the curtain rod in inches by the spacing you want. If you want rings every 5 inches on a 10-foot curtain rod, you'll divide 120 by 5 to get 24, which means you'll need about 24 rings total.

How many pleats are in a drapery panel?

For example; a drapery made with two and a half times fullness based on the rod width will generally have an average of 5 pleats per width for single width panels, 7 pleats per width for one and a half width panels, 10 pleats for two width panels and so on.

Do I need curtain rings?

In room where you'll be opening and closing your drapery on a daily basis, we strongly suggest using hanging clips or ring clips. Because you'll want to control the amount of light, you'll want to be able to effortlessly slide the curtains along the rod.

What is the difference between pencil pleat and pinch pleat curtains?

Pinch pleats use more fabric and are fuller than pencil pleats. The pleats are hand-sewn in and permanently fixed for more luxurious, tailored look. As pinch pleat is a fixed, sewn-in heading, it is important that you quote an accurate track/pole width when ordering pinch pleats.

How do you use two prong pinch pleat curtain hooks?

One hook is needed at the back of each set of pleats and at each end of the panel (4). Insert one of the two prongs into each of the two adjacent pockets (1). Pull both prongs through, while flipping the hook (2). The hook is now securely inserted (3).

How do you calculate the number of pleats?

Tally the number of pleats that will be on the window curtain. For example, there can be six pleats. Divide the window length by the number of pleats, then calculate how big you'd like the pleat to be. Add another few inches for the fold of the pleat.

How much extra fabric do I need for pinch pleat curtains?

- A pinch pleat curtain requires more fabric to sew in the pleats as it gathers up tighter. As such you will require 2.5x the track width or 150% fullness.

How many grommets are in a curtain panel?

An average drapery will have 8 grommets per width, so dividing by 7 is a good place to start! One tip for making professional quality grommet draperies is to place seams in the space behind a grommet so that is behind the rod.

Do curtain rings have to match Rod?

It depends. If you can see all the windows at the same time, then yes. You might even need the same drapery between rooms if your home is very open concept-like. The more obvious separation there is between rooms, though, the less you need to be concerned with coordinating rods between them.