How many hours a day should I run my pool pump?

Every pool must turn over at least once a day, so most pool pumps should run approximately 8 hours a day. But here's the thing: you don't have to run your pool pump consecutively. You can choose to run it for three hours in the morning before you leave for work and another 5 hours in the evening.

Is it better to run your pool pump at night or during the day?

It's best to run your pool pump during the day

Not only does sunlight give fuel for algae to grow, it also destroys your pool chlorine and this is why you should always run your pool during the day!

How long should I pump my pool for?

The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool's size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool's turnover rate is.

Is it OK to run pool pump 24 hours a day?

A Rule of Thumb

Generally running your pool pump for 12-hours a day is a good option. This is based on the assumption that your average pool pump has a turnover rate of about 8 to 12-hours. That means that the total volume of your pool water will filter through your system 2 to 3 times per 24-hour period.

Does a pool pump use a lot of electricity?

Outside of the air conditioner, the pool pump is the largest electricity consumer in the average pool-containing home. According to the study, at the national average of 11.8 cents per KWh, a pool pump alone can add as much as $300 a year to an electric bill.

How Many Hours Should You Run Your Pool Pump?

Should you turn off pool pump while swimming?

Many of the INTEX pump/filters are NOT UL rated and you should not swim with them plugged in. They do have one or two that are UL rated and can be left on while swimming. Just about all other pool equipment brands can be used while you are in the pool when properly installed.

How long should pool pump run in summer?

So how long should the average pool pump run during the summer? To make this process simple, it easier for homeowners to follow this basic guideline: for every 10 degrees of outdoor temperature run your pump for one hour. So if the average temperature is 60 degrees, run your pump for 6 hours.

How often should your pool pump run?

Every pool must turn over at least once a day, so most pool pumps should run approximately 8 hours a day. But here's the thing: you don't have to run your pool pump consecutively. You can choose to run it for three hours in the morning before you leave for work and another 5 hours in the evening.

Should I turn off pool pump when raining?

If your pool pump manufacturer has declared your pump is rain safe, you can leave it on in rainfall. Nevertheless, during a thunderstorm, it is highly recommended that you switch off and unplug your pool pump to prevent any costly and irreversible damages to your pool equipment.

What is the cheapest time to run your pool pump?

It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.

How many hours a day should you run your pool pump in the winter?

Depending on the size of your pool, we still recommend you run your pump run at least 4-6 hours a day during the fall and winter months. The daily cycle can be divided into multiple cycles, but each cycle should be no shorter than 4 hours, for all the water to pass through the filter at least once.

How often should you backwash an inground pool?

As a general rule, you should be backwashing your pool about once a week or in conjugation with your scheduled maintenance. Another industry standard is to backwash when your filter's pressure gauge reads 8-10 PSI (pounds per square inch) over the starting level or “clean” pressure.

Is rainwater good for swimming pool?

Rainwater itself does not cause algae, but it can provide the right environment for algae. Rain will bring phosphates, nitrates and other organic contaminants into the pool. As we discussed earlier, rain also reduces chlorine levels.

Should you shock your pool every week?

How Often Should I Shock My Pool? Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.

Why did my pool turn green after rain?

"Heavy rain dilutes pool chemicals, especially salt and chlorine, which causes the pool to turn green. This means the water is not sanitised or healthy, so it's vital to address this.

How much does it cost to run a pool pump 24 hours a day?

12 cents per kWh = 4.97 per day to operate the pool pump. Now if you are running the same pump, but with 230 Volt, the cost will be 2.49 per day.

How long should pump run after shocking pool?

A pool filter should be run for a minimum of 6 hours after shocking a swimming pool. This is to allow the filter to clean the water and give the shock enough time to fully mix with the pool water. Running the filter after shocking for 24 hours to 7 days is necessary if the pool has a large amount of algae.

Should I run my filter when I shock my pool?

Run the filtration system

While shocking your pool will help kill any germs any algae, it won't actually get rid of them; for that, you need your filter. So be sure to run your pool filter for at least 24 hours.

How often do pool filters need to be cleaned?

A pool needs a clean filter and it needs to be cleaned periodically-usually once a month in swim season and perhaps less frequently in the offseason. If your pool's filter is oversized by design, these filters need cleaning 3-4 times per year by a pool professional.

Can you run pool pump with cover on?

Absolutely! A cover does nothing to interfere with the water circulating through your system. It doesn't touch your pump or any other piece of equipment you have. When your pool is covered during these winter months, you can run it less, thus protecting the pump from premature aging.

What does baking soda do to pool water?

Baking soda, also known as sodium bicarbonate is naturally alkaline, with a pH of 8. When you add baking soda to your pool water, you will raise both the pH and the alkalinity, improving stability and clarity. Many commercial pool products for raising alkalinity utilize baking soda as their main active ingredient.

How do I make my pool crystal clear?

How do I make my pool water blue?

Do you rinse after backwashing a pool?

In order to prevent residual blow back into the pool, once you've finished backwashing it's highly advisable to rinse the filter. Just as the backwash lifts and flushes the sand, the rinse resets the sand to its original position for optimum filtration.

How often do you change sand in a pool pump?

On average, sand should be replaced every 3-5 years. This may be longer if the pool stays clear, or shorter, if the filter runs all the time. The jagged edges of the sand wear down and become smooth as the sand ages.