How many gallons of water does it take to fill a Safe Step Walk-in Tub?

The average walk-in tub typically holds somewhere between 40 and 80 gallons of water. By comparison, a standard bathtub typically only holds 25 to 45 gallons of water.

How many gallons does it take to fill a Safe Step walk-in tub?

The average walk-in bathtub can hold up to 50 gallons of water. However, the amount of time it takes to fill up the tub will depend on how much water you prefer. If you choose a walk-in bathtub with a heated backrest, it can help you stay warm while you wait.

How much hot water is needed for a walk-in tub?

The typical walk-in tub requires at least a 50-gallon water heater. Even if your tub is not that large, you have to be able to fill it at least two-thirds full of hot water.

How long does it take to fill a Safe Step walk-in tub?

Even with rapid fill and rapid drain features, walk-in tubs can average around eight minutes to fill or drain, leaving a significant amount of time where much of the body is exposed to air and can become chilled. One possible way to reduce chilling is to purchase a model with a heated seat.

How many gallons of water does a Kohler walk-in tub hold?

The Walk-In Bath is designed for a standard 40-50 gallon water heater, but the age and condition of your home's water heater may affect performance.

How to Use Your Safe Step Walk-In Tub

Do walk-in tubs decrease home value?

It depends on certain factors such as the location of your house, the people living inside and also the potential buyers. Walk-in tubs add great value to a home if there are elderly and physically disabled individuals residing in it. It increases safety and adds convenience to the bather.

Are walk-in tubs any good?

The good news? A walk-in tub comes with far more features than a normal bathtub, making it well worth the price tag. If you are looking for a bathtub that has easy access, whirlpool jets, a heated backrest, a handshower and so much more, then a walk-in tub is a smart investment.

What are the problems with walk-in tubs?

Long wait: Bathers have to enter the tub before filling it and can't exit until it's fully drained. Risk of chills: Some walk-in tubs fill and drain slowly, which may leave a bather at risk of becoming chilled. Higher-end models offer heated seats and rapid draining to avert these issues.

Do you have to sit in a walk-in tub while it fills?

Close the door and turn on the tap to begin filling your tub. Yes, you'll have to sit inside while you wait for it to fill—but don't worry, it fills quickly.

How do you fill a walk-in tub?

Do you need a tankless water heater for a walk-in tub?

We recommend either a heat-pump water heater or tankless water heater for your walk-in tub. Both options are more energy-efficient and seem to offer better advantages than other water heaters.

Will a 40 gallon water heater fill a bathtub?

Determining if a water heater is large enough for a bathtub is actually pretty simple; the water heater tank should be about 2/3 the size of the bathtub. For example, if you have a 40 gallon water heater, it would be just large enough for a 60 gallon bathtub.

How many gallons does a 5 foot bathtub hold?

This tub holds about 80 gallons of water.

Can you use Epsom salts in a walk-in tub?

Yes. Epsom salt is safe to use in the KOHLER Walk-In Bath! Just make sure you use it in moderation and rinse your bath thoroughly once you're finished soaking. Many of our customers enjoy using Epsom salt in their Walk-In Bath.

How many gallons of water does a 5 minute shower use?

According to the U.S. Environmental Protection Agency (EPA), a full bathtub requires about 70 gallons of water, while taking a five-minute shower uses 10 to 25 gallons.

How many gallons of water does a soaker tub use?

Most people use about 30 gallons of water for a bath, according to industry estimates. When filled to capacity (just below the overflow), a standard bathtub holds 42 gallons, but some of that water will be displaced when you get into the tub.

What are the pros and cons of walk-in tubs?

A walk-in bath is also a worthwhile investment for caregivers and family members of people with limited mobility. On the downside, walk-in tubs can be expensive and difficult to install. It could cost you $10,000 or more to pay for a tub and professional installation services.

How much is a safe step walk-in tub cost?

High Cost of Entry: A Safe Step walk-in tub can cost you anywhere from $2,500 to $8,000. When you tack on the cost of installation, which will likely be somewhere in the ballpark of $5,000, you'll definitely be spending a good chunk of change for a Safe Step tub.

Can you take a shower in a walk-in tub?

If you have purchased a walk-in bathtub for its many bathing benefits, you can now add the ability to take a shower to that list -- with the help of Bath Planet's shower kits for walk-in tubs. A walk-in bathtub is a great choice if you or a loved one has limited mobility.

Are walk-in tubs hard to maintain?

While your walk-in tub is relatively easy to maintain, there are a few tips and tricks to keep in mind when cleaning. Here, we will outline the three cleaning cycles you should go through with your tub: daily cleaning, weekly or monthly cleaning, and deep cleaning.

What is an alternative to a walk-in tub?

Slide-in style Bathtubs are similar but different than a walk in tub in ways. For example, these have higher walls with seats molded in them, which swing and allow the user to bathe. Basically, the operator would sit and back up and sit. Then you are able to fill and bathe as you normally would.

How long does it take to empty a walk-in bathtub?

Regular walk-in tubs can take about 6-15 minutes to fully drain, and it's understandable that you wouldn't want to sit exposed for that long! Meanwhile, fast-draining tubs can take only four minutes or less to empty itself.

How much does a walk-in tub really cost?

Walk-in tubs can cost between $4,000 and $20,000, with a national average of $5,500 including labor and installation. The unit could cost between $4,000 and $10,000 on its own. The final price depends on the tub's features, technology, and the ease of installation. Adding jets requires electrical work.

Can I sell my walk-in tub?

Yes, you can sell your old bathtub. On average, a reused or salvaged bathtub will run anywhere from $300-$1,000, depending on the material and quality of the bathtub.