How many coats does Thompson's Water Seal have?

One coat is enough, but if more color is desired, a second coat can be applied within two hours before the first coat has dried. With Thompson's^® WaterSeal^® Waterproofing Stains, you can clean your tools with soap and water.

Can I apply 2 coats of Thompson's water seal?

Apply 2 coats using brush,roller or sprayer. note: Use at full strength.do not dilute. The second coat should be applied when the first coat has soaked in the surface. For best results do not leave the first coat to dry for more than 1 hour before applying the second coat.

Can you use too much Thompson Water Seal?

Remove the excess product as soon as you notice it.

One of the common causes of water sealer not drying among first-time DIYers is applying the product in excess. As a result, they end up with the thick sticky residue of the sealant that remains lodged on the deck instead of drying as it should.

How often do you need to apply Thompson's water seal?

You need to apply only one coat when waterproofing with a Thompson water seal. However, you can add a second coat if you prefer more color. Ensure you apply the second coat within two hours before the first coat dries.

Should I put two coats of sealer on my deck?

Overly thick sealant is prone to peeling and chipping, so avoid oversaturating the surface by applying only one coat of sealant at a time. In most cases all you'll need is one coat, but if you decide to apply a second coat, wait at least 24 hours.

Thompson’s WaterSeal Review, Does It Work?!

Is one coat of wood sealer enough?

No, one coat of Polyurethane is not enough to provide a nice finish. . Apply three to four coats of polyurethane for a professional quality finish. A single coat won't protect the wood from scratching and denting. Like I mentioned earlier, applying polyurethane can be a tricky affair.

How long does Thompson water seal take to dry?

Drying. Allow at least 48 hours to dry; however drying time will vary depending on the substrate, temperature, and humidity. Allow minimum of 30 days drying time before applying oil based paint over Thompson's® WaterSeal® Waterproofing Wood Sealer – Clear.

What's better than Thompson's water seal?

How long does Thompson Water Seal last?

How long will Water Seal last? If applied correctly, Water Seal will last up to 4 years. This is dependent on conditions such as orientation of the wall and local climate.

What is the best way to apply Thompson Water Seal?

The fastest way to apply is with a pump-up sprayer (using a coarse setting), but you can also apply with a brush or a roller. You should apply liberally. In the case of areas with heavy discoloration or dirt, apply a second coat, brush lightly with a broom and hose off.

Does Thompson Water Seal peel?

Thompson's WaterSeal has clearly not been a consumer favorite with deck stains or sealers. Mainly as it does not offer any UV protection and it grays in a few months. The Transparent and Semi-Transparent versions are prone to premature peeling and wearing after about 1 year.

Does Thompson Water Seal dry?

Q: Will Thompson's^® WaterSeal^® Clear Multi-Surface Waterproofer impart color to my deck, concrete, or brick surface? No. Thompson's^® WaterSeal^® Clear Multi-Surface Waterproofer applies white but dries clear and allows your wood to gray naturally over time.

Why is my deck sticky after sealing?

"A sticky or tacky deck is usually due to over-application or failing to wipe the excess stain from the surface of the wood. We recommend our Penofin Pro-Tech Cleaner Step 2. This is a product that comes in powder form. You mix 1 cup to a gallon of water, wet the wood and apply the solution to the wood surface.

Can Thompson Water Seal go over stain?

Yes, you can put Thompson water sealer over stained wood whether the stain is water or oil-based. But surface preparation is key. If the stain has completely dried and cured it's fine to apply sealer, but if there is still some moisture, applying the water seal over the stain might cause problems.

What temperature do you apply Thompson's water seal?

Be sure that both surface and air temperatures are above 50°F during application and remain above 40°F for 48 hours after application. Do not apply product if rain is forecasted within 24 hours of application.

Is it better to stain or seal a deck?

Deck sealing will protect the wood from splitting, cracking, moisture, mildew, and rot while maintaining the color and grain of the wood. A stain will protect the wood and provides a more uniform tint or color to the wood to complement surrounding structures.

Should I pressure wash my deck before sealing?

Pressure washing is the best way to prepare your deck for sealing. After you've pressure washed your deck, you'll need to wait for it to completely dry. Sometimes, this can take as long as 48-hours.

What is the longest lasting deck sealer?

Q. What is the longest-lasting deck sealer? An oil-based deck sealer, such as Varathane Ultimate Spar Urethane Oil Based, will protect a deck for up to 5 years.

Is Thompson's water seal oil based or water based?

Thompson's^® WaterSeal^® Waterproofing Stains are water-based products that have film-forming properties to protect the wood by repelling water. Each product has its own "feel" during application; however, each product provides protection from water damage and has a coating that resists mildew and UV damage.

Can you apply Thompson's water seal in the sun?

Clear sealer offers very little UV protection but retains the natural color of the wood. It is not recommended where decks are subject to significant sun exposure. It also must be reapplied more often than most stains, typically every 2 to 3 years, depending on sun exposure.

Is Thompson water seal worth it?

Is Thompson's WaterSeal Any Good? Our experience with Thompson's WaterSeal Waterproofer Plus Clear Wood Protector was disappointing overall, and we would not recommend this product. Its inability to prevent UV graying is too harmful to your deck's wood.

Do you need 2 coats of ready Seal?

Ready Seal is intended to be a two-coat application, and the representation of tones above and on the Ready Seal website is indicative of two coats of Ready Seal.

Can you apply Thompson's water seal to wet wood?

Thompson's^® WaterSeal^® Waterproofing Stains can be applied to damp wood, so you only have to wait about two hours to begin applying stain. Some of our other products require that the wood dry for 48 hours before applying a deck coating.

Should you do 2 coats of stain?

How Many Coats of Stain Should I Apply? Olympic solid color wood stains require the application of two thin coats for optimum durability. Applying two coats of solid wood stains will also hide wood grain and imperfections.

Can I apply a second coat of stain a week later?

Can I Apply a Second Coat of Stain a Week Later? No, applying a second coat of stain a week later is a bad idea. If you apply another coat of wood stain after a week, it will not adhere to the wood properly. As a result, any finish you use on top will experience adhesion problems and peel off.