How many chlorine tablets should I put in my well?

Drop the proper number of pool chlorine tablets into the well. For a 10-foot well use 2 tsp. of a chlorine tablet, for a 20-foot well use 1 1/2 tbsp. of a chlorine tablet, for a 40-foot well use 3 tbsp.

How often should you chlorinate your well?

Homeowners with private wells should have their well water tested every 3 to 5 years for some contaminants, including bacteria.

How long does it take for chlorine tablets to dissolve in a well?

Typically, a 3-inch pool chlorine tablet is designed to chlorinate from 7,500 to 10,000 gallons of water per week, meaning it'll take seven days to dissolve.

Should you put chlorine tablets in your well?

the well has been flooded or exposed to bacterial contamination in another manner, such as a crack in the well cap. Chlorine granules, tablets and liquid chlorine in the form of household bleach can all be used to disinfect your well.

How much chlorine do you put in a well?

Dug well (1 meter/3 foot diameter)

Add 1 litre (1 quart) of household bleach for every 1.5 metres (5 feet) of depth of water. If you don't know how high the water stands, use the well casing depth to estimate how much household bleach to use.

Disinfecting Well/Water System: How Much Chlorine to Use

How long should you wait to drink water after you chlorinate a well?

Allow chlorinated water to stand in the well and pipes for at least 8 hours (preferably 12 to 24 hours). Run water from outdoor faucets to waste (away from desirable vegetation) until the chlorine odor is slight or not detected at each faucet. Then run indoor faucets until there is no chlorine odor.

What happens if you put too much bleach in well?

According to AskingLot, if you put too much bleach in your well, it can destroy the good bacteria found in the well, which can be a significant problem! The company also says that you should dilute the bleach with water so the pipes do not get ruined.

How many chlorine pellets do I put in my well?

Use 3/4 pound of chlorine pellets for each 100 gallons of water in well. Dissolve pellets in clean, plastic container and add to well. Pour two cups of pellets directly into well.

How many 3 inch chlorine tabs should I use?

To use the right number of tablets, always round your pool volume up to the nearest unit of 5,000 gallons. For instance, your pool has a capacity of 20,000 gallons, you would add four chlorine tablets. But if your pool holds just 16,000 gallons, you'd still use four, three-inch chlorine tablets. It's that easy.

How do you know if your well water is contaminated?

Can you use chlorine tablets for drinking water?

Water disinfection tablets.

You can disinfect water with tablets that contain chlorine, iodine, chlorine dioxide, or other disinfecting agents. These tablets are available online or at pharmacies and sporting goods stores.

Why does my well water turn brown when I add bleach?

The brown is the iron in the water that has oxidized as a result of the chlorination. Normally, the iron in water is in ion form and does not display itself until it combines with oxygen and forms common rust which turns the water reddish-brown.

Is shocking a well Necessary?

Shock chlorination is a method of disinfecting a water well. It is recommended when a water system is contaminated with bacteria. Contamination can occur when the well is installed, when repairs are made to the pump or plumbing, or when rainfall runoff enters the well.

Can you shock your own well?

Use ordinary liquid laundry bleach to shock chlorinate the water system. Determine how much bleach to use, then pour the bleach down the well and circulate it through the whole water distribution system. Wait 6-12 hours for the chlorine to work, then flush the chlorinated water from your well and pipes.

Should you put Clorox in your well?

You can disinfect your well with household chlorine bleach such as Clorox, Purex or a generic brand. The chlorine in the bleach kills bacteria. Note that it may take more than one chlorination for your well to return a satisfactory test.

How long can you leave bleach in a well?

Mix the bleach with the well water.

Then place the hose in the hole where you poured the bleach, allow the water to run back into the well for 15-20 minutes.

What is a natural way to clean well water?

You can boil the well water for 5 minutes. With this, all the bacteria inside it will be eliminated. However, boiling will not be able to remove the solids and other materials inside the well water. The use of chlorine drops or iodine tablets can effectively kill the bacteria in the well water.

How do you treat well water for drinking?

How do you sanitize a well?

Rinse the inside of the well casing with a garden hose or bucket for 5-10 minutes. Open all faucets inside the home and run the water until you notice a strong odor of chlorine (bleach) at each faucet. Turn off all faucets and allow the solution to remain in the well and plumbing for a minimum of 12 hours.

Why does my well water get muddy when it rains?

Rainwater runoff contamination is typically caused when surface water finds its way into your well via a leak in the seal or pipe at the wellhead. This type of leak is likely to bring contaminants down into the well including bacteria, fertilizers or nitrates.

Can you shower after chlorinating well?

Keep in mind that doing laundry and taking a shower cannot be done for at least 24 hours with a chlorinated well. Waiting a few days to do these is a good idea. We recommend using unscented bleach for this process and using a chlorine test kit from your local supply store.