How many bags of quikrete do I need for a fence post?

1 – 4 bags of concrete per fence post are typically what's needed. This depends on the type of soil, fence design, height, post size and bag weight. In general the depth of the post's hole needs to be 1/3 to 1/2 of the above ground height of the post.

How many concrete bags do I need for a fence post?

Most fence post holes will need between 1 - 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.

How many bags of quikrete do I need for a 4x4 post?

Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 - 48 hours.

How many 50 pound bags of concrete do I need for a fence post?

At least 2 bags per fence post, sometimes more depending on the size of the hole and the post.

How much quikrete does it take to set a post?

Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole. Then compact and level the gravel using a post or 2x4. Set the post into the hole and attach 2x4 braces to adjacent sides of the post. Use a level to position the post perfectly vertical.

QuickCrete Post Setting

How deep should a 7 foot fence post be?

How Deep Should a Fence Post Be? For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you'll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone.

Should I use concrete or cement for fence posts?

Concrete provides a strong foundation for wooden fence posts, but can rot them more quickly. Setting them in dirt, with or without gravel or crushed rock depending on your soil type, can help the posts last longer before going rotten. You can also use metal fence post anchors to prolong their life.

What is the best concrete mix for fence posts?

The best concrete mix for fence posts I've found is Quikrete Fast Setting Concrete Mix in a 50 lb bag. It's 4000 psi, easy to work with, sets up fast, and doesn't need to be mixed. Just pour it in the hole and soak with water.

How do I figure out how many bags of concrete I need?

For concrete, the formula for volume is as follows: length x width x thickness. To determine how many bags of concrete you will need, divide the total cubic yards needed by the yield.

How many bags of Postcrete do you need per post?

The exact amount of Post Mix Concrete needed will vary depending on the width and depth of the hole, but as a general rule you'll need about one and a third bags for a standard fence post.

How deep should a 12 foot post be in the ground?

The general rule of thumb when setting a post is that the depth of the post's hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.

How much concrete do I need for a post hole?

A: Finding the right amount of concrete depends on the size of the hole and the size of the post. The diameter of the hole should equal about three times the diameter of the post and the depth of the hole should be about ⅓ to ½ the total length of the pole.

How much area does a 50 lb bag of quikrete cover?

A 50 lb bag of concrete approximately cover around 1.5 square feet area upto standard depth of depth of 3 inch for your patio and sidewalk. A bag of 50 pound yields 0.375 cubic feet, thickness of slab 3″= 0.25 feet, so, a 50 lb bag of concrete covers = 0.375 ÷ 0.25 = 1.5 square feet.

Is rapid set concrete OK for fence posts?

Rapid Set Concrete is specially formulated to harden rapidly, so you can complete a job faster and have more time for other projects. It is highly suitable for fixing fence and non-load bearing pergola posts, clothes hoists and many other non-structural uses.

Is quikrete as good as concrete?

Summary: Is Quikrete As Good As Concrete? Quikrete premixed concrete is just as good, and strong, as traditional concrete you buy from a plant or concrete you mix on site. Concrete is made from sand, cement and aggregate stone and that's exactly what's in Quikrete premixed concrete.

How do I keep my post level while concrete dries?

You need to level it in two directions with a 4-foot level. After getting it straight in the first direction, hold one of the braces against the post and drive a single screw to connect the brace to the post. You can then level and brace the post in the other direction and begin filling the hole.

How long will a 4x4 post last in concrete?

How Long Will A Treated 4×4 Last In The Ground? (Explained) A treated 4×4 will last 20 to 25 years in the ground if the conditions in the soil and climate are favorable. That number could increase to 40 to 75 years if you install the treated 4×4 in a cement ring rather than the soil.

How big of a hole do you need for a 4x4 post?

A general rule of thumb is to dig the diameter of the hole at least 3-4 times the diameter of the post. For example, if setting 4 x 4 wood posts, dig holes 9-12" in diameter. Posts should be centered in the hole and the posts should always have concrete under them.

What size Post do you use for a 6 foot fence?

Post lengths for fences start at 8 or 10 feet for a 6-foot-tall fence. They are commonly four-by-fours, which measure approximately 3 1/2 by 3 1/2 inches, or six-by-sixes, at around 5 1/2 by 5 1/2 inches.

How deep should fence posts be grounded?

The 2 ft Rule

Lawsons experts recommend you should dig a hole which has a depth of 2 ft (24 in / 600mm) to ensure you have a stable timber or concrete fence post.

How deep should a 6ft fence post be?

The width of the post hole should be 3 times the width of diameter of the post. For example, if you are erecting a 6 foot high fence using 4 inch fence posts, the posts need to be 6 feet above the ground. 6 divided by 3 is 2, therefore the depth of the hole required is 2 feet.

How far apart should I put fence posts?

Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn't cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.