How long should I run pool pump in summer?

On average, you should run your pool pump around 6-8 hours per day during winter and 10-12 hours per day during summer. Note that you need to run your pool pump longer during summer because algae grow more in warm temperatures.

How long should pool pump run in hot weather?

To make this process simple, it easier for homeowners to follow this basic guideline: for every 10 degrees of outdoor temperature run your pump for one hour. So if the average temperature is 60 degrees, run your pump for 6 hours. If the average temperature is 80 degrees, run your pump for 8 hours.

Is it better to run pool pump during day or night?

It's best to run your pool pump during the day

Not only does sunlight give fuel for algae to grow, it also destroys your pool chlorine and this is why you should always run your pool during the day!

How long should my pool pump run?

Every pool must turn over at least once a day, so most pool pumps should run approximately 8 hours a day. But here's the thing: you don't have to run your pool pump consecutively. You can choose to run it for three hours in the morning before you leave for work and another 5 hours in the evening.

Is it OK to run pool pump 24 hours a day?

A Rule of Thumb

Generally running your pool pump for 12-hours a day is a good option. This is based on the assumption that your average pool pump has a turnover rate of about 8 to 12-hours. That means that the total volume of your pool water will filter through your system 2 to 3 times per 24-hour period.

How Long Should You Run Your POOL PUMP? | Swim University

Does a pool pump use a lot of electricity?

Outside of the air conditioner, the pool pump is the largest electricity consumer in the average pool-containing home. According to the study, at the national average of 11.8 cents per KWh, a pool pump alone can add as much as $300 a year to an electric bill.

Should I turn off my pool pump at night?

It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.

What time of day is best to run pool pump?

The best time to run your pool pump is during the warmest hour of the day; however, keep in mind that this means you will have higher energy consumption, which may lead to an increase in your electric bill. If you want to save on your energy costs, you can run your pool pump at night to avoid peak hours.

Should I turn off pool pump when raining?

If your pool pump manufacturer has declared your pump is rain safe, you can leave it on in rainfall. Nevertheless, during a thunderstorm, it is highly recommended that you switch off and unplug your pool pump to prevent any costly and irreversible damages to your pool equipment.

How long should I filter my pool?

The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool's size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool's turnover rate is.

Can you swim with pool pump on?

Many of the INTEX pump/filters are NOT UL rated and you should not swim with them plugged in. They do have one or two that are UL rated and can be left on while swimming. Just about all other pool equipment brands can be used while you are in the pool when properly installed.

When should I turn my pool pump off?

Run Your Pool Pump For Non-Consecutive Hours

Again, refer to those non-peak utility hours. Working around those, you can run your pump for two hours here, seven hours there, and then three hours there. As long as it runs for at least 8 hours in every 24-hour period, you're covered.

How often should my pool filter run?

You should run your pool pump and filter at least once a day to ensure you get proper filtration. Whether you have an inground pool, permanent above ground pool or portable above ground pool like an Intex, Summer Waves or Best Way pool, you'll want to run your pump daily and on average for 8 hours.

How long should pump run after shocking pool?

A pool filter should be run for a minimum of 6 hours after shocking a swimming pool. This is to allow the filter to clean the water and give the shock enough time to fully mix with the pool water. Running the filter after shocking for 24 hours to 7 days is necessary if the pool has a large amount of algae.

How long should you wait to swim after adding chlorine?

Liquid chlorine — In general, it's a good idea to wait at least four hours after putting liquid chlorine in the pool. The size of your pool and the amount of chlorine added does play a factor in this, too. Once your levels reach 5 ppm or lower, you're ready to swim.

Is rainwater good for swimming pool?

Rainwater itself does not cause algae, but it can provide the right environment for algae. Rain will bring phosphates, nitrates and other organic contaminants into the pool. As we discussed earlier, rain also reduces chlorine levels.

Should you shock your pool every week?

How Often Should I Shock My Pool? Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.

Why does my pool turn green when it rains?

"Heavy rain dilutes pool chemicals, especially salt and chlorine, which causes the pool to turn green. This means the water is not sanitised or healthy, so it's vital to address this.

What are the best hours to run your pool filter?

For energy efficiency best time to run the pool's filtration system is during off-peak hours when the electricity demand is lower. This time is typically between 8 p.m. - 10 a.m. Also, to warm the pool you can run it during the day, to cool it at night.

How often should you backwash an inground pool?

As a general rule, you should be backwashing your pool about once a week or in conjugation with your scheduled maintenance. Another industry standard is to backwash when your filter's pressure gauge reads 8-10 PSI (pounds per square inch) over the starting level or “clean” pressure.

How long does it take for pool water to circulate?

Typically, it's between six and eight hours, and allows water to be circulated a few times per day. The goal here is to make sure your total volume of water circulates three to four times a day, not just once.

Can you keep a pool clean without a pump?

Stagnant, still water is a breeding ground for gunk. Keeping your pool clean requires keeping the water moving and circulating. If you still have electricity, you can use a robotic pool cleaner or a submersible pump to clean, move and circulate the water. If you are without power, grab your pool brush!

Does pool pump need to run all the time?

Although it's generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time. A proactive, productive and energy-saving maintenance activity is to remove the debris floating on the pool surface with a hand-held skimmer.

How long should a pool pump run in Florida?

On average, your Florida pool pump should run for about 8 to 10 hours a day.