How long should a 6 foot fence post be?

Post lengths for fences start at 8 or 10 feet for a 6-foot-tall fence. They are commonly four-by-fours, which measure approximately 3 1/2 by 3 1/2 inches, or six-by-sixes, at around 5 1/2 by 5 1/2 inches.

How tall should fence posts be?

For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you'll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone.

What is standard fence post length?

The lumber industry defines standard wood post sizes as 4x4 or 6x6. The outside dimensions of the standard 4x4 measure 3-1/2" x 3-1/2", and the outside dimensions of the standard 6x6 measure 5-1/2" x 5-1/2".

How do you calculate fence post length?

Number of posts = (fence length / post spacing) + 1 (round the result up) Number of sections = number of posts - 1. Post length = fence height * 1.5.

How many bags of cement do I need for a fence post?

1 – 4 bags of concrete per fence post are typically what's needed. This depends on the type of soil, fence design, height, post size and bag weight. In general the depth of the post's hole needs to be 1/3 to 1/2 of the above ground height of the post.

How to Dig, Set and Concrete Fence Posts

What size post do I need for an 8 foot fence?

A common rule of thumb, is to dig the hole 3 times as large as the post, and to a depth of 1/3-1/2 of the post height above ground. so for a 8' high fence, using 4x4 posts. dig the holes 12" in diameter, to a depth of 2 1/2 - 4'. Of course, that's assuming you're setting the posts in concrete.

How deep should a 6 foot fence post be in the ground?

The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet). Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole. Then compact and level the gravel using a post or 2x4.

How much of a fence post should be in the ground?

As a general rule of thumb, you'll need to place at least 1/3 the height of the post in the ground. For example, a 6-foot tall fence will need at least 2 feet of post in the ground.

Should wood fence posts be set in concrete?

Concrete provides a strong foundation for wooden fence posts, but can rot them more quickly. Setting them in dirt, with or without gravel or crushed rock depending on your soil type, can help the posts last longer before going rotten. You can also use metal fence post anchors to prolong their life.

Is 18 inches deep enough for a fence post?

The general rule of thumb when setting a post is that the depth of the post's hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.

Can you set fence posts in dirt?

Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.

How much concrete does it take to fill a post hole?

Most fence post holes will need between 1 - 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.

How tall can a 6x6 post be?

Six-by-Six Posts

A 10-foot-tall six-by-six Douglas fir or southern pine post can support an area of 256 square feet under a load of 50 pounds per square foot, which is more than seven times as much as a comparable four-by-four post.

How much will a 6x6 post support?

The load capacity of a 3-foot #2 grade 4×4 is 17,426 pounds, and a similar 6×6 is 20,834 pounds or 16% better. However, an 8-foot 4×4 supports 6468-pounds and 2339-pounds at 14-feet, while a 6×6 is 18032 and 10550-pounds respectively – or 64% and 78% more load capacity.

How much can you notch a 6x6 post?

I need to meet 2015 IRC code. Code states that the 2x10 (x2) needs to fully bear on the notched 6x6 post. Also, the thru bolt must go thru a minimum of 2.5 inches of the non notched part of post.

Do fence post need to be below the frost line?

All fence posts should be cemented in the ground below frost level. Check your local frost level and dig deeper by at least 6".

How long does it take concrete to set in a post hole?

The concrete sets up in 20 to 40 minutes, so you can quickly move on to the next stage of the project (a great convenience when setting fence posts) or backfill the hole to finish the job. Under normal curing conditions, you can apply heavy weight to the post (a basketball backboard, for example) after just 4 hours.

How many rails do I need for a 6 foot fence?

All fences will have a top and bottom rail. One general rule of thumb is to have a horizontal rail for every 24 inches in height. For a six-foot-high fence, this means three rails.

Should fence posts be inside or outside?

Fence posts should be on the outside of the fence

The correct installation of ag fencing is to place it on the inside of the posts. This way, animals in the enclosure brush against the wire, not the posts. Fence posts that have been placed outside of the fence material will take nearly all of the animal's force.

Should I put gravel under my fence post?

If a fence post fails without any sign of a pest infestation, it's likely that the failure was caused by moisture that rotted the wood over time. To help slow such deterioration, add pea gravel or crushed stone to the bottom of the posthole.