How long do RZRS last?

In general my rule of thumb is 100 hours and 1000 miles for ever year old the machine is. Max for me is like 300 hours and 3000 miles.

What is considered high miles on a Polaris RZR?

While there are varying opinions on this matter, most off-roaders will agree that anything above 5000 miles is considered high mileage on ATVs.

Are RZRs worth the money?

That Said, Is It Worth the Investment? If you love spending your free time taking on the toughest trails, from mountain passes to desert dunes and everything in between, then the answer is a resounding yes. RZRs are purpose-built to conquer any obstacles you put in front of them.

How many hours is too much for a RZR?

In general my rule of thumb is 100 hours and 1000 miles for ever year old the machine is. Max for me is like 300 hours and 3000 miles. Unless they can show some significant maintenance and replacement parts have been done.

Whats better Talon or RZR?

The engine layout of both of these side-by-side UTV models is very similar. However, the Honda Talon 1000X and 1000R get power from a 999cc 106 hp engine. The twin cylinder engine that the Polaris RZR employs makes up to 110 horsepower. This isn't such a vast difference, but on paper the Polaris UTV takes the win here.

How can a Polaris Turbo RZR make it to 5000 miles?

How much does it cost to rebuild a RZR engine?

It typically costs between $2,500 and $4,000, on average, to rebuild an engine. In general, a lot of engine repairs require replacing bearings and seals before a machine can be inspected, and re-installing the engine once it has arrived.

How long do Rzr belts last?

Riders who drive conservatively can easily get 1,500-2000 miles out of a single drive belt. But while some individuals don't mind carrying a spare belt and replacing it ad hoc in the field, others opt to replace their belts after every 500 miles or so for good measure.

How long does a Rzr clutch last?

We have seen failures happen at 1000 miles, and even have clutches last over 3000-4000 miles. The best thing you can do is install a set of our performance rollers ASAP with the least amount of miles possible. Most will install our clutch kit at the same time which also saves on belt life/clutch wear.

Can you shift a RZR from low to high while moving?

Do not attempt to shift gears with engine speed above idle or while the vehicle is moving. Attempting to shift the transmission while the vehicle is moving could result in damage to the transmission. Low gear is intended for lower speed, and hauling or towing loads.

Does Polaris use Chinese parts?

Engines are still built in Osceola, WI. And many of the parts are made in China. Just like the rest of the big names out there. But the assembly is done in Mexico now.

Why do Rzr belts break?

Many belts are damaged because of spin-burn or hourglassing, which is a result of not using low gear when tires are stuck in mud or sand or when loading or unloading your vehicle.

How often should you service RZR?

Following break-in, change your oil and filter every 100 hours, six months or 1,000 miles — whichever comes first. For youth models, perform a break-in oil and filter change after one month of use. After that, change the oil and filter every 30 hours, six months or 300 miles — whichever comes first.

What kind of engine is in a RZR?

The new 2022 Polaris RZR Pro R packs an amazing engine and a first for UTVs. Tucked up in the rear is Polaris' 2.0L ProStar Fury four-cylinder engine. This naturally aspirated I-4 churns out a best-in-class 225 hp and 152 lb-ft of torque.

What engine is in a RZR 1000?

Each RZR XP 1000 starts out with a 999cc DOHC twin-cylinder engine making 110 hp.

How much does it cost to rebuild a RZR 800 engine?

The last thing you want is to pay for a full engine rebuild, only to have your RZR motor smoke and guzzle down oil when you get it back. Add shipping costs and the price of a complete rebuild could cost you in excess of $3,000.

How do you break in a RZR clutch?

Break in the clutches and belt by operating at slower speeds during the break-in period as recommended. Pull only light loads. Avoid aggressive acceleration and high speed operation during the break-in period. If a belt fails, always clean any debris from the clutch air duct and from the engine compartment.

Does Polaris use break in oil?

Use of any improper oils may cause serious engine damage. Polaris Premium 4 Synthetic Oil is specifically formulated for your 4-cycle engine. For more on a proper break-in, listen to the Break In That Off-Road Vehicle episode of the Polaris Podcast.

Where are Polaris RZRS built?

Anaheim, CA: Taylor-Dunn and GEM Manufacturing.

Who makes the engines for Polaris?

The entire 2015 lineup of Polaris ORV (Ranger, RZR, Sportsman, and ACE) are now all powered by ProStar engines. In the past, Polaris partnered with other manufacturers (Robin/Fuji industries was one) to provide engines for their ATV's and UTVs.