How long do ball joints last?

While ball joints may last 70,000 miles or more, they don't last forever. Their actual lifespan will depend on your driving habits, road conditions and exposure to road splash and salt.

How often should ball joints be replaced?

Generally speaking, you should expect to have to have your ball joints replaced between 70,000 to 150,000 miles of driving. Excessive play in the joint can cause additional wear, and if a ball joint fails, your car's suspension could collapse and you could lose control of the vehicle.

How do I know if my ball joints are worn out?

How long does it take for a ball joint to fail?

Q: How Long Should Ball Joints Last? A: A ball joint's lifespan will depend heavily on the type of vehicle and the kinds of driving it's subjected to. In general, you can look to get at least 70,000 miles out of a ball joint before it needs replacement.

What causes a ball joint to wear out?

Ball joints deteriorate if dirt, grit and impurities get inside or grease escapes, leading to a lack of lubrication. Added to this, rusting and general wear and tear also damage these suspension parts. The effects of this deterioration are excessive play and looseness (beyond the manufacturer's specifications).

How often do ball joints need to be replaced? Lee Hill Auto Service

How much should it cost to replace a ball joint?

Average Ball Joint Replacement Cost

You might be surprised to learn that replacing a ball joint is not overly expensive. You can expect to pay around $300 in most cases, including both parts and labor. Most ball joints cost about $100 to $150, while the labor costs will run you $150 to $200.

What does a failing ball joint sound like?

Sound — Usually the first indication of worn or loose ball joints will be a faint, intermittent clunking noise that seems to be coming from a corner of your vehicle. The sound may be more pronounced when going over a bump or a dip or when going around a corner.

Which ball joints wear out first?

The lower ball joint usually takes the biggest hits and wears out first. Not only does it need to handle the load of the vehicle, but it also absorbs the shocks of potholes and other bone-jarring road hazards.

Should I replace all ball joints at the same time?

If one ball joint is worn out, chances are the ball joint on the opposite side is also bad or nearing the end of its service life. Many technicians recommend replacing both joints at the same time (both lowers, both uppers or all four).

What happens if ball joints go out while driving?

Vibrations – when a ball joint wears out, it becomes loose which can create a vibration that you can feel through the floor or the steering wheel while you drive. Steering wheel wandering to the left or the right – worn ball joints cause the steering to pull from left to right on its own.

Can a bad ball joint cause shaking?

vibration: a loose or worn ball joint can cause excessive vibration. this can make the car feel very unstable, and in some cases it will shake the vehicle. you may also feel a vibration in the steering wheel. wandering steering: a worn ball joint can cause your car to pull to the right or left.

Do ball joints have a break in period?

No, there is no "break-in" period for ball joints and tie-rods.. that would be called "wear" and it's what you don't want. If your steering doesn't feel right, it's most likely alignment (sometimes it's tires too). Either that, or you just got used to a sloppy front end, or your judging too quickly.

Can you replace just the ball joint without replacing control arm?

In order to know if just the ball joint or the whole complete lower control arm needs replaced, the lower ball joint will need to be disconnected from the steering knuckle and checked to see if it fits tight in the lower control arm. If it is loose, then replace control arm.

Are ball joints hard to replace?

From that standpoint, yes, it is hard to replace ball joints - more than basic DIYr skills and tools are required. There is also the safety dimension for being in close proximity to a suspended vehicle, and a compressed spring that has enough force to cause serious harm if it comes loose.

How long does it take to put on ball joints?

Most ball joint jobs are going to run 3-5 hours of work per side, leading to a cost of $350-650.00 in labor costs alone, plus parts. Should you choose to do the job yourself, remember that AutoZone not only has all the parts, but all the proper tools to complete the job.

Can I just replace one ball joint?

After replacing the ball joints on one or both sides you will need to get an alignment done. If you only replace one side, get the alignment done, and need to replace the other side in a month, another alignment will need to be done.

How often should I grease my ball joints?

The JBA K6292 ball joint should be greased every 3000 to 5000 miles. If you go in mud pits or across streams with the vehicle, grease the ball joint after you are done playing in the mud and water.

How do you maintain ball joints?

Remember to never use air or power tools as they can cause damage to components. Insert the ball joint pin into the steering knuckle. Secure it with a new bolt and locking nut, tightening to the correct torque. Refit the wheel and wheel nuts and tighten to the correct torque.

Can ball joint cause accident?

As ball joints wear, this can hamper your ability to steer and control the vehicle. If a ball joint fails, a vehicle's suspension can collapse or the wheel could fall off causing the vehicle to lose control. A bad ball joint is extremely dangerous and can cause serious accidents.

Is a ball joint expensive?

In general, ball joints are inexpensive with a range between $20 to $80 each. Labor will vary greatly by model. Some vehicles cost as low as $60 to $80. Yet others, especially four-wheel drive trucks, can range from $160 to $200 per ball joint.

How many ball joints does a car have?

Ball joints are most commonly found in the lower arms of front suspensions, depending on your vehicle you may have four ball joints on your front suspension and some ball joints in the rear of your vehicle.

Are ball joints covered under warranty?

Ball joints are not considered a wear and tear item like brakes or windshield wipers, which means most extended warranty policies will cover them, assuming they aren't damaged because of negligence, or an act of nature that you can't control.

What happens if you don't grease your ball joints?

Grease is good for noise and maintenance but no amount of it will bring a failed ball joint back to life. If you find that you have a failed ball joint we offer Moog upper and lower ball joints for many makes and models.

How long does it take to replace ball joints and tie rods?

Your looking at alot of labor hours at a shop to relplace both ball joints, both tie rod ends and both strut bearings. I would say, just estimating, about 5-7 hrs of labor for all of that. The strut bearings are going to be the same labor as replacing the struts which is around 1.5 hrs a side.