How is Dr Fixit used?

It is used as an additive for cement concrete, mortar and plasters to enhance the properties of cement to impart waterproofing property and thereby provide benefits like no rusting of steel bars, no cracks and no dampness.

How do you use Dr Fixit at home?

What is the ratio of mixing Dr Fixit in cement?

LW+ should be used in concrete, plaster and mortar in all the areas of house. Mix 200 ml of LW+ with every 50 kg bag of cement.

Which Dr Fixit is best for waterproofing?

Dr. Fixit LW+ is another essential waterproofing solution from Dr Fixit. This material is integral for waterproofing of plaster and concrete. Using this product as an additive in cement enhances cementing properties of cement, imparting its higher compressive strength.

How do you mix Dr Fixit with cement?

Dr Fixit - Total Waterproofing Guide (Hindi)

Can we mix Dr Fixit with paint?

A colour and waterproofing solution rolled into one. After priming your walls, you can directly apply Dr. Fixit Raincoat, completely doing away with the need for separate coats of waterproofing and paint. It has a superior sheen, and matches the look of normal, high quality external paints.

Which chemical is used in Dr Fixit?

Dr. Fixit Pidicrete URP is based on modified styrene butadiene latex supplied as a ready to use bonding agent in liquid consistency. It is used for repair of spalled concrete – floors, columns, beams, chhajas, slabs & waterproofing of toilets & bathrooms, small terraces etc.

How do you use Dr Fixit in plaster?

To get good bonding between new & old plaster surface, use Dr. Fixit Pidicrete MPB, an acrylic bonding agent. While making plaster, add Dr. Fixit Pidiproof LW+ to impart waterproofing to the plaster.

Is Dr Fixit waterproofing effective?

It is thicker than the normal exterior paint and does not peel off or crack like normal paints. Dr. Fixit Raincoat is the most trusted waterproofing expert which is known for its crack-bridging ability, excellent flexibility, weathering durability and high resistance to water and growth of microorganisms.

How do I use Dr Fixit in putty?

Clean the existing substrate as mentioned earlier in the surface preparation section. apply two brush coats of mixed Dr. fixit Dampguard at an interval of 6 hours. Dampguard modified putty can also be used incase of cracks observed on internal damp walls.

How do I stop terrace leakage?

Which waterproofing is best for roof?

Bitumen is a good waterproofing material due to its nature. It is easy to apply and economical. Bitumen-based liquid membrane and bitumen-based roll membrane materials are the most well-known, most economical, and high-performance materials used for roof insulation.

Which paint is best for roof leakage?

Acrylic paint provides excellent waterproofing solution and is best suitable in waterproofing paint for roof & waterproofing paint for terrace, built with rectangular blocks.

How do you waterproof a house?

To waterproof your roof or terrace, you have to first prepare it, cleaning through the cracks and the entire area. Use a high-quality crack-fill paste or powder such as Berger Homeshield Crackfill and apply 2 coats (as required) inside the cracks.

How much area does Dr Fixit Roofseal cover?

Fixit Roofseal Top Coat (diluted with water in the ratio 2:1) as Self Priming - 9 - 10 Sq. mtr / litre.

How do you use Dr Fixit for a new roof?

Why is Dr Fixit Roofseal recommended?

Dr. Fixit Roofseal is a single component cold applied elastomeric waterproofing coating based on synthetic resin emulsion. It is a tough yet extremely flexible coating that can be efficiently applied to any thickness by roller or squeegee creating a fully adhered waterproofing coating with no wastage.

How do I waterproof my ceiling?

How do I waterproof my walls?

Waterproofing During Construction

Waterproofing is best done at the time of construction. Using high-quality liquid waterproofing compound in the starting stage with cement and sand can be effective. Otherwise, use a waterproof coating before painting your exterior walls to prevent water leakage.

Which cement is best for waterproofing?

Water Repellent Cement is also called Hydrophobic Cement. A small amount of Hydrophobic surfactants such as stearic acid, boric acid or oleic acid is mixed with the ordinary portland cement during grinding of clinker. Hydrophobic Cement is most suitable for basements and for making water tight concrete.