How far does a wood stove need to be away from a non combustible wall?

The standard clearance recommended by the National Fire Protection Agency is 36 inches. This means that the back of the stove should be 36 inches away from any combustible material, such as woodwork, unprotected walls, furniture and even firewood.

How close to wall can wood stove be with heat shield?

Do I need a heat shield for my stove? The Fire Protection Association recommends that the common radiant-type stove must be spaced out by 900mm (36 inches) from a combustible wall. Using a heat shield can reduce the space required to 95mm as stated by HETAS.

What is the clearance for a wood stove?

All stoves require a minimum 36-inch clearance to unprotected combustibles above and on all sides of the stove. A single wall stovepipe must have a clearance to combustible walls and ceilings, measured at right angles to the pipe of at least 18 inches.

How close can a wood stove be to a cinder block wall?

The reduction is specified by NFPA and most codes. For example, when required clearance with no protection is 36 inches, a 3 1/2-inch-thick masonry wall with ventilated air space used as a wall protector, reduces clearance by maximum of 66 percent, to 12 inches from the combustible wall.

How close can I put a wood stove to a wall?

The standard clearance recommended by the National Fire Protection Agency is 36 inches. This means that the back of the stove should be 36 inches away from any combustible material, such as woodwork, unprotected walls, furniture and even firewood.

How close can my wood stove be to the wall?

What is a heat shield for a wood stove?

What is a wood burning stove heat shield? First off, let's define exactly what we mean when we talk about stove heat shields. Well, as their name suggests, heat shields are panels made from heat-resistant materials such as vitreous enamel, which are designed to protect (and enhance) the wall behind a stove.

What is the minimum clearance above a stove to combustible material?

(CMC 921.3. 2): Household cooking appliances shall have a vertical clearance above the cooking top of not less than 30 inches to combustible material or metal cabinets.

How close can a wood stove be to cement board?

A combustible floor must be protected by a non-combustible material (like tile, concrete board, or certified to UL-1618 or as defined by local codes) extending beneath the heater and a minimum of 6" from each side and minimum 16" from the front face of the stove and minimum 6" (or the rear clearance to combustibles ...

How close can a fireplace be to a wall?

According to the National Fire Protection Agency (NFPA), a fireplace must be 36 inches away from bare walls. If the walls around the fireplace are protected by a heat-resistant material or some form of insulation, the fireplace can be less than 36 inches from the wall.

How do I fireproof a wall behind a wood stove?

Faux Panels. A common way to help protect the wall behind a wood stove and create a backdrop for your stove includes using masonry veneer faux panels. Stone or brick is a common material to use behind a wood burning stove. These panels help create more of a focal point for a room.

How do you protect a wall from stove heat?

If your walls are combustible, you can install a shield on a wall to reduce the stove's clearance area. Like the floor pad, the shield should be made of a noncombustible material, such as sheet metal.

What is considered a non-combustible wall?

Examples of non-combustible materials include steel, masonry, ceramics and certain insulating materials (such as fiberglass or mineral wool insulation). Gypsum wallboard is considered by the codes to be non-combustible although it does have a thick paper backing that is combustible.

How close can drywall be to a wood stove?

Wood frame walls covered with dry wall are considered combustible. If no wall protection is used, the common radiant-type stove or heater must be spaced out at least 36 inches from the wall.

How close can drywall be to fireplace?

The National Fire Code requires all combustible material to be at least 6 inches from the opening of the firebox. For every 1/8 inch of protruding combustible material, you must account for an additional inch of clearance.

What is code for a wood burning fireplace?

The National Fire Code dictates that any combustible material (e.g., wood mantel or similar trim) must be at least six inches from the firebox opening. An additional inch of clearance is needed for every 1/8 inch the combustible material or trim protrudes.

Can you put cement board behind a wood stove?

Safe wood stove installations require a heat shield that will prevent heat from the wood stove from creating a fire hazard in the building materials that form the exterior wall. Hardi cement board is an inexpensive solution that will form the foundation of an effective heat shield for any application.

Is drywall OK behind a wood stove?

Drywall is combustible and not a suitable material either for use behind the wood stove or for use underneath tile. Removing it from the wall behind the wood stove allows you to install cement backerboard instead.

Can I tile behind a wood burning stove?

You can absolutely use tiles around the back and sides of your wood burner – and we also want to show you some inspiration on how to liven up your wood burner with fireplace tiles!

Can a stove be next to a wall?

A stove can go beside a wall. Freestanding ranges do not require spacing between the back of the appliance and a back wall. On the other hand, it is recommended to have a few inches of space between the stove and a sidewall.

How much space do you need above a stove?

It is recommended that you leave between 24" and 30" of space between the top of your stove and the above cabinet. Spacing between stoves and other kitchen objects is essential for both safety and best kitchen practices.

Is drywall considered combustible?

All drywall is fire-resistant to some degree. Also called gypsum board, ordinary drywall panels are made of a layer of soft, non-flammable mineral called gypsum pressed between two thick sheets of paper.

Can you use tile as a heat shield?

If your stove will be within three feet of a wall, adding a heat shield is essential. These instructions show you how to make a protective heat shield for nearby walls. Tile can make it beautiful as well as effective.

Can you drywall around wood burning fireplace?

Most wood stove fires are caused because combustible materials are placed too close to a hot stove. Only use drywall that displays a UL (Underwriter's Laboratory) label, certifying that the drywall is fire-retardant and safe to use behind your wood stove.

Is cement board considered non-combustible?

Yes, HardieBacker® 1/4" Cement Board is deemed noncombustible when tested to ASTM E 136 and can be used in conjunction with other noncombustible materials around a fireplace. This does not mean that clearances to combustible building materials can be reduced by using HardieBacker 1/4".

Is wood combustible or non-combustible?

Combustible material means a material that, in the form in which it is used and under the conditions anticipated, will ignite, burn, support combustion or release flammable vapors when subjected to fire or heat. Wood, paper, rubber, and plastics are examples of combustible materials.