How does an AIS system work?

AIS works via a combination of GPS, VHF radio, and an AIS transponder. The transponder broadcasts a ship's information, such as speed and heading (information gathered by GPS, of course), the ship's name, port of origin, size and draft, and more, over VHF frequencies 161.975 megahertz and 162.025 MHz.

What information does AIS transmit?

AIS transmits, automatically and at set intervals, dynamic information relating to the ship's course, speed and heading; static information related to the ship's name, length, breadth; and voyage-related details such as cargo information and navigational status (e.g. underway or at anchor).

How is AIS data collected?

Global AIS transceiver data collected from both satellite and internet-connected shore-based stations are aggregated and made available on the internet through a number of service providers.

How often does your AIS transmit data?

AIS transponders automatically broadcast information at regular intervals. Navigational status data is transmitted every 2 to 180 seconds, depending on a vessel's activity. In addition, voyage related data is broadcast every 6 minutes.

What are the 3 types of AIS information transmitted by vessel?

Types of AIS equipment.

For a shipboard fitting there are three types of AIS equipment, Class A, Class B and receive only. Class A is intended for vessels where the fit is mandatory. Class A transmits more information, more frequently and at higher power than Class B.

How AIS Works - Operation of AIS

Can I connect my GPS to the AIS?

Our very popular AMEC CAMINO-101 Class B AIS transponder can now either use its internal GPS system coupled with the AMEC external antenna or it now supports using an external GPS device connected through the inbound NMEA port.

Why do ships turn off AIS?

A ship's crew may turn off its AIS broadcast for a variety of legitimate reasons, but this behavior may indicate that a vessel is hiding its location and identity to conceal illegal activities like fishing in no-take protected areas or entering another country's waters without authorization.

Do I need a special antenna for AIS?

Though the two frequencies are close, having an AIS antenna for your AIS system, will optimize performance. VHF antennas can work on AIS, yet the frequency of 162 MHz they will be operating at, is at the high end of the operable bandwidth of the antenna, where performance is not ideal.

What are the limitations of AIS?

What VHF channel does AIS use?

AIS transponders and receivers use two VHF radio frequencies: 161.975 MHz (AIS1, or channel 87B) and 162.025 MHz (AIS2, or channel 88B). The USCG has asked the Federal Communications Commission to authorize any US vessel to operate AIS on these two channels under its existing ship station license.

How do you send a message to another ship in AIS?

Send AIS messages

Select Message: Use this dropdown box to select any existing message. Message Name: This field shows the name of the message when you select it. Message Type: Select the type of AIS message from this dropdown box. You could choose the Broadcast Safety message or the Addressed Safety message.

What are the 6 static information of an AIS?

AIS broadcasts voyage related information (including ship location, speed, course, heading, rate of turn, destination and estimated arrival time) as well as static information (including ship name, ship MMSI ID, message ID, ship type, ship size).

Is AIS satellite based?

Automatic Identification System (AIS) is an automatic tracking system used for identifying and locating vessels by electronically exchanging data with other nearby ships, AIS base stations, and satellites. Satellite AIS (S-AIS) is the term used to describe when satellites are used to detect AIS signatures.

How does AIS connect to radar?

From a Radar screen or the Radar overlay, select Menu > Other Vessels > AIS. Select an option: To indicate the distance from your location within which AIS vessels appear, select Display Range, and select a distance. To show details about AIS-activated vessels, select Details > Show.

How do you use AIS?

Just place the chart plotter's cursor on an AIS icon, and a list of valuable information unfolds. The ship's name and radio call sign are shown. This means you can pick up a VHF and hail a specific vessel that may be posing a threat.

What ships are required to have AIS?

Regulations for carriage of AIS

The regulation requires AIS to be fitted aboard all ships of 300 gross tonnage and upwards engaged on international voyages, cargo ships of 500 gross tonnage and upwards not engaged on international voyages and all passenger ships irrespective of size.

What are the three advantage of AIS?

The system is fully automated with absolutely no human intervention. Unlike Radar, It is not affected by rains or Sea. Its propagation is better than that of radar, due to the longer wavelength. It's possible to “see” around bends and behind islands if the land masses are not too high.

What happens when an AIS sensor fails?

If the external position sensor fails the AIS unit cannot use the internal GPS receiver and no position will be transmitted. The difficulty we are now led to understand is this failure cannot normally be detected by the onboard user, and therefore how would the user know the vessel has a faulty AIS.

What are the advantages of AIS?

What are the benefits of AIS? AIS provides a lot of benefits in terms of traffic monitoring and vessel assistance. Ship owners and maritime authorities greatly rely on AIS to supplement information acquired from traditional radars for location tracking and is used to detect and avoid vessel collisions.

Do I need VHF with AIS?

For AIS Transmit and Receive, you need two pieces, a VHF Radio with DSC built-in plus an AIS Transponder.

How much does an AIS cost?

AIS receivers are built by all the major electronics manufacturers, plus a few specialty companies. Cost generally ranges between $200 and $400.

Can you switch off AIS?

The answer is quite straightforward: NO, AIS cannot be switched off, save for very few exceptions. According to IMO guidelines provided by Resolution A. 917(22), AIS should always be in operation when ships are underway or at anchor.

When AIS can be switched off?

Fishing vessels may be required to carry AIS, but any vessel may switch off its AIS if the master believes continual operation may compromise the safety or security of the vessel.

What is the difference between Class A and Class B AIS?

Class A AIS transponders are required to have a DSC (156.525 MHz) receiver, external GPS, heading, and rate of turn indicator, and can also transmit and receive safety-related text messages. Class B AIS transponders operate using Carrier-Sense TDMA (CSTDMA) broadcast mode and transmit at a power level of 2 watts.