How do you store a dance floor?

Using releasable vinyl tape, tape the roll tightly together and store the roll on end in an upright position. This will prevent distortion or warping of your flooring and leave it the same condition as when you unroll it for your next use.

How do you maintain a dance floor?

How do you store Marley dance floor?

Always roll your floor around a tube (PVC) at least 4' in diameter and store the floor on end, never lying on the ground or on top of each other. Store in a space that is kept at room temperature, more or less, and allow the floor to acclimatize to the space you are using it in before installation.

How do you clean a wooden dance floor?

Use a detergent degreaser such as ProClean to mop the dance floor. Do not flood mop and do not rinse. Dye and scuff marks can be removed with a safe solvent such as Wipe Out Plus. For larger spills like coffee, tea or soda use Simply Gone.

How long does Marley floor last?

When you follow good cleaning practices and maintain your floor, you can expect your Marley dance floor to last 5-15 years and 20-25 years for wood. While some floors may last twice as long, the lifespan depends largely on how well the floors are maintained and how often the studio is used.

How To Pack Your Dance Floor (DJ TIPS)

How do you take care of a Marley floor?

To clean Marley for daily use, first, sweep away any debris and dry mop it to keep its professional appearance. Then once the floor has been swept, use a damp mop and your desired dance floor cleaner to mop the floor to remove any stuck-on dirt.

How do you clean a sticky dance floor?

Soap, detergent or just plain water and elbow grease does little to remove this type of residue. as PROCLEAN. Be aware that some solvents will attack the vinyl and soften the floor to the point of damage. Always test any new product on a small area of your floor before doing the entire job.

What do professionals use to clean hardwood floors?

You can use a commercial wood-cleaning product, like Bona or Murphy Oil Soap. Be sure to follow the manufacturer's instructions. You can also make your own cleaner by mixing one part vinegar to 10 parts warm water. Add a few drops of liquid Castile soap.

How do I make my dance floor less slippery?

Keep the humidity of the studio around 50%, which allows the air to retain moisture, preventing it from leaching onto the floor. High humidity with a drop in temperature overnight settles a microlayer of moisture on the floor. Any residual oils on the floor rise to the surface since oil and water do not mix.

Can you put Marley on carpet?

Sometimes called marley floor tiles, Greatmats portable dance floor tiles feature a vinyl surface and a raised base that can be placed overtop of carpet for temporary or permanent installations.

Can you steam clean a Marley floor?

Steam Cleaning Your Floor

It may seem harmless since it doesn't involve any chemicals, but the answer is no — you should never use a steam mop to clean your marley floor. Steam mops boil water inside and penetrate the floor with the steam they produce, which is at least 212 degrees Fahrenheit.

What is a Marley floor?

What Is a Marley Dance Floor? In the dance industry, the term “marley” describes just about any roll-out vinyl floor used as a dance floor. The moniker turns out to be a bit confusing, since it could mean any number of very different dance floors used for a variety of purposes.

How do you clean a stage floor?

Warm water and soap is the best solution for cleaning the stage surface. The heat of the water helps to soften the glue and the soap helps clean the residue away. Just make sure you get the soapy water cleaned up and dried when done for the best results.

How do you clean a dance studio?

As you know by now, cleaning involves vacuuming and dry mopping the floors and wiping down doorknobs, barres and similar surfaces throughout the studio. You should also use a mild dance floor detergent (such as Stagestep's ProClean™) once or twice a week as a basic maintenance protocol.

How do you wax a dance floor?

Sprinkle lightly over clean floor. Brush “Dance Floor Wax” over dancing area with push broom, then sweep off excess wax. Smooth floors require little product, more rough floors need additional wax. Add “Dance Floor Wax” as needed to produce ideal dancing conditions.

What should you not put on a hardwood floor?

Don't use straight ammonia, alkaline products or abrasive cleaners. They'll dull or scratch the finish. Don't rely on lemon juice or a vinegar-and-water solution to clean hardwood floors. "I don't recommend using vinegar or lemon juice, at least not in large quantities, as these can damage the floor's seal," said Wise.

Is Murphy's oil soap good for hardwood floors?

Whether you're cleaning one area or all of your flooring, Murphy® Oil Soap is safe to use on hardwood floors.

Is Murphy's oil soap good for wood?

Murphy® Oil Soap gets deep into grime to break up dirt particles and it's safe to use on wood products like cabinets.

What do they sprinkle on dance floors?

So, that seems to be it! The round-up for how to get a little more sliding ability seems to primarily be cornmeal, (or cornstarch, or baby powder used sparingly), Dancefloor Wax, Dancehall & Shuffleboard Wax, or Candle Wax.

How do you clean nightclub floors?

Typically a pH neutral cleaner should be used to clean vinyl or hardwood dance floors. If the floor is seriously soiled, a degreaser may be necessary. Some routines call for using a pH neutral cleaner three or four times per week and then using a degreaser for deeper cleaning.

Why is the Marley floor important?

Marley roll-out vinyl flooring options primarily act as a performance surface. One benefit to industry performers is that it protects against the risk of slipping and falling. In addition to providing a controlled surface for dancers, roll-out vinyl flooring typically includes some level of shock-absorbing cushioning.

Is it OK to tap dance on concrete?

Portable dance floors can protect dancers from injury and damage to tap shoes. Dancing with tap shoes on concrete or tile is also not recommended. Taping on concrete will warp and damage your taps and tap shoes are expensive to replace!

Can you put a dance floor on carpet?

You can install dance flooring over carpet as long as it isn't too plush. You can often assemble dance tiles directly over low pile carpet. For Marley rolls, you need to place plywood boards first to create a stable subfloor.

Can you put a dance floor over carpet?

If you are installing home dance flooring over carpet, there is actually no need for a cushioning underlayment. The carpet itself can provide the padding you need, and flat top tiles can be installed directly overtop.