How do you repair an old concrete basement floor?

Apply a concrete patch to the crack, making sure there are no gaps or uneven areas. Smooth the patch with a putty knife. If the crack requires a second patch, then wait for the first layer to dry before applying the second coat. Seal the concrete patch and allow it to dry for several days.

How do you repair a crumbling concrete basement floor?

How do you fix a pitted concrete basement floor?

How do I restore an old concrete floor?

What do you put on old concrete floors?

A concrete bonding liquid is an effective adhesive for holding the patch in place, but the right patching material depends on the depth of the hole. If your hole is extremely shallow, you should use a sand-mix concrete. For holes that are 1 inch or deeper, you'll need to use a coarse mix with crushed-stone aggregate.

How to easily resurface a concrete floor | Watco

How do you make an old concrete floor look good?

Can old concrete be refinished?

Concrete resurfacing is a way to make old concrete look new again. A concrete coating is applied over the existing surface, offering a variety of color, texture and pattern options. This type of decorative refinishing can be done on driveways, patios, pool decks and even indoor floors.

Can you stain 40 year old concrete?

Your existing old concrete should be fine to stain, so long as it is not contaminated with glue, paint, oil, grease, sealers, waxes, or anything else that would prevent the stain from soaking into the pores of the concrete.

Can pitted concrete be resurfaced?

Once the surface begins to pit, filling the divots with concrete is usually a temporary fix that loosens over time. You can fill pits with a bonding concrete repair material, which is similar to caulk. Restoring the porch to a more original appearance requires dressing it with a special resurfacing concrete mixture.

Can you epoxy over pitted concrete?

For larger areas of pitting and spalling, we recommend using a 100% epoxy concrete patch with a sand aggregate. The silica sand is mixed in with the epoxy to act as a filler.

What is best to patch concrete?

How do you make a concrete floor look new?

Is it better to stain or paint concrete?

Concrete paint coats the surface with a thin film that forms on the surface. This traps moisture which damages concrete over time. Stain, however, colors the porous concrete surface without sealing it. This enables the free flow of moisture into and out of the surface.

Is it worth it to resurface concrete?

But when the problem is just superficial cracking, discoloring, or minor chipping or spalling, resurfacing is a very good option. It's a project that just about anyone can tackle, and it's a lot more affordable than replacing the concrete slab.

Why is my basement floor flaking?

Spalling or flaking is ugly but doesn't require repair.

It can occur when the concrete mix is too wet or hasn't been properly cured. The water evaporates and loosens the top layer of the concrete, causing it to flake off. Concrete spalling is unattractive, but chances are the slab is still in good shape.

What is the cheapest way to cover a concrete floor?

What do you put on a basement concrete floor?

What is the cheapest way to finish a basement floor?

How do you cover unsightly concrete?

Tiles made of natural materials, such as slate, sandstone or travertine, as well as ceramic tiles, can be used to resurface an ugly cement patio. Select a type of tile that suits your taste. Apply tile adhesive to the surface. Set the tiles into the adhesive and once dry, apply grout between the tiles.

Can rough concrete be sanded?

Can You Sand Concrete? Even though concrete is a very hard material it is possible to sand concrete but it can only be done with the correct abrasives. Always opt for diamond grinding wheels or diamond polishing pads when sanding concrete.

What can I cover old concrete with?