How do you mix Pine-Sol in a spray bottle?

Instead, I have found that a spray bottle with a Pine Sol/water mixture is a life saver. I grabbed a few inexpensive spray bottles at the store a while ago, at about $2.00 a bottle. For every 1 cup of warm water, I add 1-2 tbsp Pine Sol. Spray, wipe, move on!

How do you dilute Pine-Sol in a spray bottle?

Dilute ¼ cup of Pine-Sol^® in one gallon of warm water. Dip a sponge in the mixture to wipe grease and grime away. Or for everyday mess control, keep the Pine-Sol® mixture in a spray bottle for quick cleaning spritzes.

Can I put Pine-Sol and water in spray bottle?

Q: Is it OK to put the product in a spray bottle? A: No. Using the Pine-Sol^® Squirt 'N Mop in a spray bottle could result in damage to the spray container.

Can I use Pine-Sol as a spray disinfectant?

A: Yes. Original Pine-Sol^® Multi-Surface Cleaner is registered with the EPA as a disinfectant when used as directed full strength. When used according to the instructions on the product, it kills 99.9% of germs and household bacteria on hard, nonporous surfaces.

Do you dilute Pine-Sol?

Pine-Sol^® Cleaners are concentrated formulas that you can dilute for most jobs. For general cleaning, a 24 oz. bottle gives you 12 gallons of cleaning power! Add water to the formula yourself and save.

How To Make Disinfectant Spray To Kill Virus

Is Pine-Sol good for cleaning?

You can use Pine-Sol® cleaners on hard, nonporous surfaces, including floors, sinks, counters, stoves, bathtubs, shower stalls, tile and more!

Which is better Pine-Sol or Fabuloso?

What is this? Pine-Sol is more acidic than Fabuloso, which gives it an advantage in breaking down stubborn stains and complex messes caused by grease. Pine-Sol Original is the only liquid cleaning solution that disinfects.

What should you not use Pine-Sol on?

According to Pine-Sol, you should refrain from using undiluted Pine-Sol on metal surfaces, such as copper or aluminum.

How do I make my house smell like Pine-Sol?

Is Pine-Sol the same as Lysol?

Lysol can be hard to find online and in-stores, but Pine-Sol seems to still be available at most retailers. Compared to Lysol, Pine-Sol has a longer contact time (Lysol's ranges from 2 minutes to 5 minutes) but will still effectively help you to limit your contact with the virus.

How do you clean kitchen with Pine-Sol?

Instructions. Dilute ¼ cup of Pine-Sol® in one gallon of warm water. Dampen a sponge in the mixture, wring out so it's just damp to wipe away grease, grime and dirt. Optional: Scrub stubborn messes or stains with full strength Pine-Sol®, using a sponge or soft cloth.

How do you make Pine-Sol floor cleaner?

Add ¼ cup Pine-Sol^® to a bucket with about a gallon of water. Mop your floor with the mixture. Try not to let liquid pool, which can warp and streak wood. Scrub stains and shoe marks with full-strength Pine-Sol^®.

Can you use Pine-Sol to clean shower?

Pine-Sol can help you with shower cleaning, walls, and more. Clear shampoo, soap and other items from your shower so you can hit all the corners before you clean. Mix ⅛ cup of Pine-Sol^® in ½ gallon of warm water. Wipe down your shower walls with the mixture.

Can you use Pine-Sol to clean bathtub?

Steps For An Expert Clean

Add ½ cup of Pine-Sol^® to the water. Dip a sponge or scrubber into the bathtub and wipe down the tub and faucets. For cleaning stubborn rings around the bathtub, drain the water and apply full-strength Pine-Sol^® directly. Scrub down with a scrubbing brush and rinse with water.

Can you pour Pine-Sol down the toilet?

Steps For An Expert Clean

Cleaning toilets and disinfecting toilet bowls is easier with these tips. Pour Pine-Sol^® directly onto a sponge, rag or scrubbing brush. Wipe down the toilet tank, lid, seat cover and outside of the bowl, reapplying more cleaner as needed.

Are Pine-Sol fumes harmful?

First of all, the only hazardous ingredient listed on the Pine Sol MSDS is alkyl alcohol ethoxylates. These belong to a group of chemicals called "aromatic hydrocarbons" which are petrochemicals with strong, pungent, odors. The only health hazard listed on the MSDS is that it is an irritant.

Can you boil Pine-Sol to make your house smell good?

No, It is NOT safe to boil Pine Sol! PineSol gets it's scent from Pine Essential oil, so it will smell exactly the same, but with no danger to you or your family. If you like Pine oil because it smells “clean”, you may like Spruce oil.

Does Pine-Sol keep flies away?

This spray is great for outdoor and indoor use. Flies seem to HATE pine-sol. To make the fly repelling spray, mix the original Pine-Sol with water, at a ratio of 50/50 and put it in a spray bottle. Use to wipe counters or spray on the porch and patio table and furniture to drive the flies away.

Why does Pine-Sol smell so good?

Full strength Pine Sol is made with real pine scent, just like the commercials claim. The fragrance used is pine essential oil. Grease-cutting surfactants and powerful cleaning agents, water, isopropanol (an alcohol solvent with antibacterial properties) and xantham gum round out the ingredient list.

Do mice like the smell of Pine-Sol?

Keep half pinesol / half water spray under sink, spray out of trash cans, or anywhere you have a pest problem. Animals such as rodents, possums, raccoons, etc. they don't like the smell.

Can I use Pine-Sol on hardwood floors?

Pine-Sol is safe to use on wood floors in small, diluted amounts. Make sure to check the label for the dilution ratio before putting it on your hardwood floor. Use a minimal amount of water and Pine-Sol mixture, as dry mopping is the best cleaning method for hardwood floors.

Why is Fabuloso so popular?

These scented cleaners are so popular in part because everyone has tile floors. The most common smell is “Lavanda” or “Lavender”, the purple Fabuloso product. I like smelling it just because it reminds me of vacations. It is a most unique smell that has become part of the fabric of life here.

Can you mix Pine-Sol and laundry detergent?

Add ½ cup of Original Pine-Sol^® along with your regular detergent to boost a load of white or colorfast laundry.

Does Pine-Sol clean mold?

Clean the area with soap (or detergent) and a small amount of water, let the surface dry, and then within 24 hours apply a non-staining cleaner such as Lysol Disinfectant, Pine-Sol Disinfectant, Tilex Mildew Remover or Clorox Cleanup.

Does Pine-Sol clean grout?

The association warns against acid-based cleaners, which can eat into grout, and cleaners with oil or wax, such as Murphy Oil Soap and Pine-Sol, because they can leave a sticky residue on grout. If the alkaline cleaners don't work, the association recommends trying an enzyme cleaner labeled for use on tile.