How do you make concrete shiny?

After you stain your concrete floor with the color of your choice, you should apply a concrete sealer. A glossy sealer creates a shiny surface, and an acrylic wax adds an additional protective coat.

How do you get a glossy finish on concrete?

When it comes to polishing finished concrete, generally there are two options: mechanical or chemical. If you want to get the shinest surface with the least amount of effort, opt for mechanical polishing. Diamond polishing is one of the most common methods used to get a shiny glass-like surface.

How do I make concrete look polished?

Grind with a 150-grit metal-bonded diamond (or finer, if desired). Apply a chemical hardener to densify the concrete. Polish with a 100- or 200-grit resin-bond diamond, or a combination of the two. Polish with a 400-grit resin-bond diamond.

How do you make concrete look new again?

How do you keep concrete looking new?

Smooth Concrete Finish -

Can you polish normal concrete?

Almost any structurally sound concrete floor, whether new or old, can be polished. However there are some exceptions, for example with new floors no special mix design is required to achieve good results – although the floor should be in place at least 28 days before polishing begins to ensure adequate curing.

Can you do polished concrete over concrete?

This way, you do not have to tear down the flooring; rather, the overlay is applied on top of the existing concrete. It is affordable. Because it does not require the installation of new flooring, polished concrete overlays are much cheaper than other concrete options.

Can you put polished concrete over concrete?

While pouring concrete over an existing slab is possible, there are a number of challenges if you choose to go down that route. An alternative solution is to polish the existing slab. You'd be happy to know that any concrete surface can be ground back and polished up.

How do you get a smooth finish on concrete?

For a really smooth finish, repeat the troweling step two or three times, letting the concrete harden a bit between each pass. At first, hold the trowel almost flat, elevating the leading edge just enough to avoid gouging the surface. On each successive pass, lift the leading edge of the trowel a little more.

Can I use gloss on concrete?

Concrete porch and patio paints are acrylic latex paints designed to resist fading, scuffing, peeling, and UV damage. They come in low-luster and gloss finishes and can also be used on interior concrete floors.

How do I make my concrete garage floor shine?

Quick and Easy: Ammonia and Water

Your mixture should be a gallon of hot water to five ounces of ammonia. Like you would with concrete floor polish, make sure a window or the garage door is open and start working at a back corner, mopping the floor towards the entryway.

How long does polished concrete last?

Mechanically polished concrete can last up to 10-12 years without any major maintenance if it is appropriately installed and maintained during that time.

Does polished concrete last outside?

Designed for strength and style, polished concrete is a fitting addition to any outdoor area. It provides a UV-resistant outdoor surface with a sleek and shiny finish that is both subtle and sophisticated.

Can you polish stained concrete?

Yes, acid stained concrete can be polished. Acid-staining is a permanent change to your concrete so even the grinding involved in polishing will not remove the color.

What do you mix polished concrete with?

The amount of each ingredient used will impact the strength, colour and overall look of your floors. The normal concrete mix ratio is 5 to 1 to 5, sand, cement, and aggregate.

Does polished concrete need to be sealed?

Stain protectors, guards and sealers are vital for ongoing polished concrete floor maintenance. protector. Stain protection is vital to the long term aesthetics of polished concrete, providing protection from discoloring penetrating stains and chemical etches.

What is the best chemical to clean concrete?

How can I make my old concrete driveway look better?

If your driveway needs a whole new look, a decorative concrete overlay will create a new finish that covers minor surface damage like cracks, imperfections, and discoloration. The overlay creates a durable finish and long-lasting bond with the original concrete that will not chip, crack or peel.

What do you put on fresh concrete?

When the temperatures drop, new concrete should be covered with concrete insulating blankets (or, in a pinch, old household blankets!). Protect new concrete from the cold for the first two to three days—up to a week, if it's very cold—after which it should be strong enough to handle it without risk of damage.

Does bleach destroy concrete?

Bleach is safe to use on concrete. When applied to concrete, bleach does not harm the sturdy material. However, it does remove spots and unwanted matter from the surface, such as mildew and moss.

What does chlorine do to concrete?

However, when chlorine is present in a water-based solution, it can permeate through concrete and reach the steel bars giving the concrete structural support. The chlorides corrode the metal framework, endangering the skeleton of your concrete floor.