How do you make a 3 wick candle burn evenly?

With three wicks lit at once, the candle at first will pool wet wax in a ring around each wick; then the pool becomes more of a clover shape and ultimately reaches out to the outer perimeter of the candle. Turn the wicks slightly inward before burning to promote an even burn.

How do you keep a 3 wick candle burning evenly?

The three-wick candle's first burn is the most important; let it burn until the wax pools evenly across the top of the candle. This may take several hours, depending on the size of the candle and the wicks. Let the candle burn until there's an even melt pool across the top of the candle -- every time you light it.

Why does my 3 wick candle burn unevenly?

Sometimes, candle tunneling is caused by a wick that isn't large enough for the size of the candle, but more often it's caused by the timing of the first burn. You want to avoid candle tunneling because it reduces the overall burn time for the candle (since all the wax isn't being used up).

How do you stop a 3 wick candle from tunneling?

The best way to fix candle tunneling is to prevent it from happening in the first place. And it's very simple, too. To prevent tunneling, all you need to do is burn your candle long enough each time so that the entire top surface of wax is melted. This is especially important the first time you burn your candle!

How do you center a 3 wick candle?

For round shape candles, a triangle placement works best for 3 wick candles. Place three wicks evenly apart at each point of a triangle, centered in the candle container. In terms of double wick candles in a round container, place them evenly apart centered in the container.

BATH AND BODY WORKS • How To Fix CANDLE TUNNELS 3 Wick

How do you keep wicks centered?

Hot Glue Gun: By placing a dap of hot glue in the center of the candle jar, and then gently pushing the wick tab over the glue before it hardens; you can secure your centered wick tab and pull the wick straight.

How do you fix an uneven burning candle?

Luckily, if you catch it early enough, there's a quick fix. Blast the top of the candle with a hair dryer on high heat. Simply hold the airflow over the top of the candle until the top layer of wax has melted and smoothed.

What to do if candle is not burning evenly?

You can fix a tunneled candle by wrapping a piece of aluminum foil around the edges and simply letting it burn. Make sure the foil hangs over the built-up wax areas, but leave an opening in the center so the wick can still burn properly. After a couple of hours, the wax should melt and even out the surface.

How do you make a candle melt evenly?

How do you fix short wick tunneling candles?

If your wick was too short, pour out some of the wax that you melted until there's about ⅛ to ¼ inch of wick above the surface. You can also use a paper towel to dab and soak up the excess wax to avoid potentially making a mess.

How do you fix a tunneling foil candle?

Turns out aluminium foil is the key to fixing a tunnelled candle quickly. Simply wrap foil around the edge of the candle, leaving a hole in the middle so that the wick can burn through properly. After a couple of hours, your wax would have melted to an evened-out level.

Are you supposed to light all 3 wicks?

Not Choosing Your Candle Wisely

“Three wicks will actually extend the life of a candle because rather than tunneling straight down the center of the candle (near the one wick) when lit, the wax gets hot enough (from the three flames) to actually pool across the entire candle,” says Heyen.

Are you supposed to light both wicks?

#1- The most important thing you need to know for any candle made with 2, 3 or more wicks is that each wick needs to be lit, every single burn. Igniting one wick at a time will not prolong the life of the candle but rather can lead to wick drowning or uneven melt pools.

How do you fix a tunneling pillar candle?

There are several ways to fix a tunneling candle. The first one is by simply allowing the candle to burn for a longer period of time. So let's say you're burning your candle for only 3 hours, try leaving it on for a little bit longer than that or until the edge of the wax has already melted.

Why is my wick drowning?

The best way to ensure a wick never gets too short is to burn the candle long enough to form a uniform pool of melted wax (but no longer than four hours). This prevents “tunneling,” or excess wax buildup on the side of the jar, which could melt during future burns and potentially drown the wick.

Why do my candles sink in the middle?

Wax sinks when it sets because as the wax cools, it slowly contracts and can leave what I refer to as 'sink holes' in the middle of your candles, but can also present as sunken dips around the wick.

Should I scrape the sides of my candle?

First, scrape the excess ring of wax from the sides of the candle. Make sure you scrape the wax closer to the wick so the candle wick can burn evenly with the rest of the candle.

What happens if wick is not straight?

With the wick off-center, the candle will burn unevenly and likely form soot on the side of the glass where the flame is too close. This is unsightly and you won't get all the hours out of your candle. It may stop burning at all as it drowns itself from too much wax melting down on top of it.

What happens if you don't Trim candle wicks?

Leaving a wick long means that you'll have a larger flame, which will melt more wax and give the candle more fuel. This larger amount of fuel can lead to incomplete combustion, which in turn creates more soot, making your candle container black and dirty.

Why is my wick mushrooming?

The most common reason for mushroom wicking to occur is down to the size of the wick you have opted for. Usually a wick that is too big causes more wax to be sent to the flame than it can handle. As the flame is unable to burn the wax it has accumulated, carbon begins to build up forming the mushroom wick.

Why is my candle dancing so much?

Any bursts of air that cause your candle flame to dance around also cause your wick to use fuel at an inconsistent pace. The wick is drawing oil from the candle wax as fuel, and a buildup is created within the wick. Bursts of air cause the flame to burn less oil than the wick is taking in.